Re: 2.6.24-rc2-mm1

[Matthew Dharm <mdharm-kernel@one-eyed-alien.net>]

[-- Attachment #1: Type: text/plain, Size: 2737 bytes --]

On Wed, Nov 14, 2007 at 10:23:09AM +0100, Gabriel C wrote:
> Matthew Dharm wrote:
> > On Wed, Nov 14, 2007 at 06:33:39AM +0100, Gabriel C wrote:
> >> Matthew Dharm wrote:
> >>> On Tue, Nov 13, 2007 at 07:49:24PM -0800, Greg KH wrote:
> >>>> Matt, are these the errors you were worried about with the patch we were
> >>>> just talking about tha tis in my tree?
> >>> I can't tell from these logs.
> >> There is the dmesg with CONFIG_USB_STORAGE_DEBUG :
> >>
> >> http://194.231.229.228/dmesg-2.6.24-rc2-mm1
> > 
> > Good news: This isn't the bug Greg was worried about.
> > 
> > Bad news: Something is seriously strange here.  Note the following from the
> > logs:
> > 
> > Nov 14 06:07:43 lara [   41.890614] usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
> > Nov 14 06:07:43 lara [   41.890616] usb-storage: -- unexpectedly short transfer
> > 
> > Note the 'R' value of zero -- this is the residue value.  It indicates a
> > complete transfer, and that matches the log lines immediately previous
> > which indicate a 4K transfer which completed properly.
> > 
> > If residue is zero, then srb->resid should be zero.  Take a look in
> > linux/usb/storage/transport.c in usb_stor_Bulk_transport()
> > 
> > If srb->resid is zero, then you should NEVER get the "unexpectedly short
> > transfer" message.  Look at usb_stor_invoke_transport() in the same file.
> 
> That code got replaced recently but I have no idea about it.
> 
> ( http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=shortlog  see the patches from Boaz Harrosh) 
> 
> srb->resid got replaced by scsi_get_resid() it I see that right.
> 
> I'm CC'ing the author , he will know I think.

The replacement looks, to my eye, to be logically correct.  The patch was
pretty clean.

Then again, I haven't looked at what is "under the hood" of the accessor
functions.  Perhaps there is a side-effect somewhere in there?

Perhaps a quick debugging test -- print the value of scsi_get_resid(srb)
just after it's initialized to zero at the top of
usb_stor_invoke_transport(), and then just after the call to
us->transport().

The first print should show a value of zero.  The debug log says that the
transport should have left it as zero.  If it's actually coming back from
us->transport() as a non-zero value, then we'll need to check all the
modifications to usb_stor_Bulk_transport to see where srb->resid is being
changed.

Matt

-- 
Matthew Dharm                              Home: mdharm-usb@one-eyed-alien.net 
Maintainer, Linux USB Mass Storage Driver

A:  The most ironic oxymoron wins ...
DP: "Microsoft Works"
A:  Uh, okay, you win.
					-- A.J. & Dust Puppy
User Friendly, 1/18/1998

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]