From: Roland McGrath <roland@redhat.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH -mm 29/43] x86 user_regset math_emu
Date: Thu, 20 Dec 2007 03:59:48 -0800 (PST) [thread overview]
Message-ID: <20071220115948.0D68F26F98A@magilla.localdomain> (raw)
In-Reply-To: Roland McGrath's message of Thursday, 20 December 2007 03:52:00 -0800 <20071220115200.C767E26F98A@magilla.localdomain>
This converts the ptrace/signal accessors for i387 math_emu
state to the user_regset interface style, and calls these
from the old interfaces.
It also cleans up math_emulate's ptrace check to be a
single-step check, which is what it really wants.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/math-emu/fpu_entry.c | 86 +++++++++++++++++++++++++---------------
1 files changed, 54 insertions(+), 32 deletions(-)
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 377c60d..cfbdaa1 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -25,10 +25,11 @@
+---------------------------------------------------------------------------*/
#include <linux/signal.h>
-#include <linux/ptrace.h>
+#include <linux/regset.h>
#include <asm/uaccess.h>
#include <asm/desc.h>
+#include <asm/user.h>
#include "fpu_system.h"
#include "fpu_emu.h"
@@ -198,9 +199,7 @@ asmlinkage void math_emulate(long arg)
code_limit = 0xffffffff;
}
- FPU_lookahead = 1;
- if (current->ptrace & PT_PTRACED)
- FPU_lookahead = 0;
+ FPU_lookahead = !(FPU_EFLAGS & X86_EFLAGS_TF);
if (!valid_prefix(&byte1, (u_char __user **) & FPU_EIP,
&addr_modes.override)) {
@@ -673,31 +672,37 @@ void math_abort(struct info *info, unsigned int signal)
#define sstatus_word() \
((S387->swd & ~SW_Top & 0xffff) | ((S387->ftop << SW_Top_Shift) & SW_Top))
-int restore_i387_soft(void *s387, struct _fpstate __user *buf)
+int fpregs_soft_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
{
- u_char __user *d = (u_char __user *) buf;
+ struct i387_soft_struct *s387 = &target->thread.i387.soft;
+ void *space = s387->st_space;
+ int ret;
int offset, other, i, tags, regnr, tag, newtop;
RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(VERIFY_READ, d, 7 * 4 + 8 * 10);
- if (__copy_from_user(&S387->cwd, d, 7 * 4))
- return -1;
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, s387, 0,
+ offsetof(struct i387_soft_struct, st_space));
RE_ENTRANT_CHECK_ON;
- d += 7 * 4;
+ if (ret)
+ return ret;
S387->ftop = (S387->swd >> SW_Top_Shift) & 7;
offset = (S387->ftop & 7) * 10;
other = 80 - offset;
RE_ENTRANT_CHECK_OFF;
+
/* Copy all registers in stack order. */
- if (__copy_from_user(((u_char *) & S387->st_space) + offset, d, other))
- return -1;
- if (offset)
- if (__copy_from_user
- ((u_char *) & S387->st_space, d + other, offset))
- return -1;
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ space + offset, 0, other);
+ if (!ret && offset)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ space, 0, offset);
+
RE_ENTRANT_CHECK_ON;
/* The tags may need to be corrected now. */
@@ -716,16 +721,21 @@ int restore_i387_soft(void *s387, struct _fpstate __user *buf)
}
S387->twd = tags;
- return 0;
+ return ret;
}
-int save_i387_soft(void *s387, struct _fpstate __user * buf)
+int fpregs_soft_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
{
- u_char __user *d = (u_char __user *) buf;
+ struct i387_soft_struct *s387 = &target->thread.i387.soft;
+ const void *space = s387->st_space;
+ int ret;
int offset = (S387->ftop & 7) * 10, other = 80 - offset;
RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(VERIFY_WRITE, d, 7 * 4 + 8 * 10);
+
#ifdef PECULIAR_486
S387->cwd &= ~0xe080;
/* An 80486 sets nearly all of the reserved bits to 1. */
@@ -735,21 +745,33 @@ int save_i387_soft(void *s387, struct _fpstate __user * buf)
S387->fcs &= ~0xf8000000;
S387->fos |= 0xffff0000;
#endif /* PECULIAR_486 */
- if (__copy_to_user(d, &S387->cwd, 7 * 4))
- return -1;
- RE_ENTRANT_CHECK_ON;
- d += 7 * 4;
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, s387, 0,
+ offsetof(struct i387_soft_struct, st_space));
- RE_ENTRANT_CHECK_OFF;
/* Copy all registers in stack order. */
- if (__copy_to_user(d, ((u_char *) & S387->st_space) + offset, other))
- return -1;
- if (offset)
- if (__copy_to_user
- (d + other, (u_char *) & S387->st_space, offset))
- return -1;
+ if (!ret)
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ space + offset, 0, other);
+ if (!ret)
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ space, 0, offset);
+
RE_ENTRANT_CHECK_ON;
- return 1;
+ return ret;
+}
+
+int save_i387_soft(void *s387, struct _fpstate __user *buf)
+{
+ return fpregs_soft_get(current, NULL,
+ 0, sizeof(struct user_i387_struct),
+ NULL, buf) ? -1 : 1;
+}
+
+int restore_i387_soft(void *s387, struct _fpstate __user *buf)
+{
+ return fpregs_soft_set(current, NULL,
+ 0, sizeof(struct user_i387_struct),
+ NULL, buf) ? -1 : 1;
}
--
1.5.3.6
next prev parent reply other threads:[~2007-12-20 12:09 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-20 11:52 [PATCH -mm 00/43] user_regset framework -- arch maintainers take note! Roland McGrath
2007-12-20 11:53 ` [PATCH -mm 01/43] user_regset header Roland McGrath
2007-12-21 7:06 ` Christoph Hellwig
2007-12-21 8:44 ` Roland McGrath
2007-12-21 10:26 ` Peter Zijlstra
2007-12-21 11:08 ` David Woodhouse
2007-12-20 11:54 ` [PATCH -mm 02/43] elf core dump: notes reorg Roland McGrath
2007-12-20 11:54 ` [PATCH -mm 03/43] elf core dump: notes user_regset Roland McGrath
2007-12-20 11:54 ` [PATCH -mm 04/43] user_regset helpers Roland McGrath
2007-12-20 11:54 ` [PATCH -mm 05/43] compat_binfmt_elf Roland McGrath
2007-12-21 12:55 ` Arnd Bergmann
2007-12-20 11:55 ` [PATCH -mm 06/43] user_regset user-copy helpers Roland McGrath
2007-12-20 11:55 ` [PATCH -mm 07/43] ptrace_request peekdata/pokedata Roland McGrath
2007-12-20 11:55 ` [PATCH -mm 08/43] compat_ptrace_request Roland McGrath
2007-12-20 11:55 ` [PATCH -mm 09/43] compat_sys_ptrace Roland McGrath
2007-12-21 7:11 ` Christoph Hellwig
2007-12-21 8:52 ` Roland McGrath
2007-12-20 11:57 ` [PATCH -mm 10/43] powerpc user_regset fpregs Roland McGrath
2007-12-20 11:57 ` [PATCH -mm 11/43] powerpc user_regset altivec Roland McGrath
2007-12-20 11:57 ` [PATCH -mm 12/43] powerpc user_regset spe Roland McGrath
2007-12-20 11:57 ` [PATCH -mm 13/43] powerpc ptrace special regs Roland McGrath
2007-12-20 11:57 ` [PATCH -mm 14/43] powerpc user_regset gpr Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 15/43] powerpc user_regset_view Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 16/43] powerpc user_regset compat Roland McGrath
2008-01-07 5:40 ` [PATCH update " Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 17/43] powerpc CORE_DUMP_USE_REGSET Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 18/43] powerpc compat_binfmt_elf Roland McGrath
2007-12-21 7:12 ` Christoph Hellwig
2007-12-21 8:56 ` Roland McGrath
2007-12-21 17:51 ` Kyle McMartin
2007-12-21 19:36 ` Arnd Bergmann
2007-12-21 20:00 ` Sam Ravnborg
2007-12-20 11:58 ` [PATCH -mm 19/43] powerpc core dump cleanup Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 20/43] powerpc SPE core dump Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 21/43] powerpc ptrace user_regset Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 22/43] powerpc ptrace generic peekdata/pokedata Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 23/43] powerpc compat_ptrace_request Roland McGrath
2007-12-20 11:58 ` [PATCH -mm 24/43] powerpc compat_sys_ptrace Roland McGrath
2007-12-20 11:59 ` [PATCH -mm 25/43] powerpc ptrace32 user_regset Roland McGrath
2007-12-20 11:59 ` [PATCH -mm 26/43] x86-64 wired cpu_has macros Roland McGrath
2007-12-20 11:59 ` [PATCH -mm 27/43] x86 i387 unify structs Roland McGrath
2007-12-20 11:59 ` [PATCH -mm 28/43] x86 i387 header cleanup Roland McGrath
2007-12-20 11:59 ` Roland McGrath [this message]
2007-12-20 11:59 ` [PATCH -mm 30/43] x86: i387 renaming Roland McGrath
2007-12-20 11:59 ` [PATCH -mm 31/43] x86 i387 user_regset Roland McGrath
2007-12-20 11:59 ` [PATCH -mm 32/43] x86 i387 cleanup Roland McGrath
2007-12-20 11:59 ` [PATCH -mm 33/43] x86 TLS desc_struct cleanup Roland McGrath
2007-12-20 11:59 ` [PATCH -mm 34/43] x86 user_regset TLS Roland McGrath
2007-12-20 12:00 ` [PATCH -mm 35/43] x86 user_regset general regs Roland McGrath
2007-12-20 12:00 ` [PATCH -mm 36/43] x86 user_regset_view Roland McGrath
2007-12-20 12:00 ` [PATCH -mm 37/43] x86 CORE_DUMP_USE_REGSET Roland McGrath
2007-12-20 12:00 ` [PATCH -mm 38/43] x86 ptrace user_regset Roland McGrath
2007-12-20 12:00 ` [PATCH -mm 39/43] x86 user_regset cleanup Roland McGrath
2007-12-20 12:00 ` [PATCH -mm 40/43] x86 compat_binfmt_elf Roland McGrath
2007-12-20 12:00 ` [PATCH -mm 41/43] x86 ia32_binfmt removal Roland McGrath
2007-12-20 12:00 ` [PATCH -mm 42/43] x86 core dump TLS Roland McGrath
2007-12-20 12:01 ` [PATCH -mm 43/43] x86 ptrace generic requests Roland McGrath
2007-12-20 13:00 ` [PATCH -mm 00/43] user_regset framework -- arch maintainers take note! Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071220115948.0D68F26F98A@magilla.localdomain \
--to=roland@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®