From: lsorense@csclub.uwaterloo.ca (Lennart Sorensen)
To: Marcin Gil <marcin.gil@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>, linux-kernel@vger.kernel.org
Subject: Re: JMicron PATA 2.6.24-rc7 can't find drives
Date: Thu, 24 Jan 2008 09:51:32 -0500 [thread overview]
Message-ID: <20080124145132.GE16171@csclub.uwaterloo.ca> (raw)
In-Reply-To: <4798A537.9000104@gmail.com>
On Thu, Jan 24, 2008 at 03:48:23PM +0100, Marcin Gil wrote:
> Yes, this is 80-wire cable; both are connected on the same cable. HDD is
> master and DVD is slave. I'll later try disconnecting DVD and see what
> happens. I didn't set cable-select due to how these drives are connected
>
> +-----+-----+
> mobo hdd dvd
>
> I think that cable select would take dvd as master and hdd as slave.
> This was not preferable when hdd was my primary drive. I can try
> cable-select now since I boot off new SATA drive.
Does the BIOS see the HD on the jmicron when doing disk detection?
I remember once forgetting to connect power to a driver and spending a
while wondering why the drive wasn't showing up anywhere.
--
Len Sorensen
next prev parent reply other threads:[~2008-01-24 14:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-23 22:23 Marcin Gil
2008-01-23 23:46 ` Alan Cox
2008-01-24 7:09 ` Marcin Gil
2008-01-24 14:27 ` Lennart Sorensen
2008-01-24 14:30 ` Marcin Gil
2008-01-24 14:43 ` Lennart Sorensen
2008-01-24 14:48 ` Marcin Gil
2008-01-24 14:51 ` Lennart Sorensen [this message]
2008-01-24 14:53 ` Marcin Gil
2008-01-24 17:11 ` Krzysztof Halasa
2008-01-24 17:22 ` Lennart Sorensen
2008-01-24 21:39 ` Marcin Gil
2008-01-24 20:36 ` Marcin Gil
2008-01-24 15:19 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080124145132.GE16171@csclub.uwaterloo.ca \
--to=lsorense@csclub.uwaterloo.ca \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=marcin.gil@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®