From: "Mark M. Hoffman" <mhoffman@lightlink.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
lm-sensors <lm-sensors@lm-sensors.org>
Subject: [GIT PATCH] hwmon updates against v2.6.24 (~git17)
Date: Thu, 7 Feb 2008 22:01:29 -0500 [thread overview]
Message-ID: <20080208030129.GA22919@jupiter.solarsys.private> (raw)
Hi Linus:
Please pull from:
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6.git release
You'll get two new drivers and cleanups all over the place. The
addition of individual alarm sysfs files to all drivers continues.
All of these patches made it into the most recent -mm, at least.
Thanks & regards,
Documentation/hwmon/ads7828 | 36 ++
Documentation/hwmon/it87 | 2 +-
Documentation/hwmon/lm78 | 4 +-
Documentation/hwmon/lm87 | 11 +-
Documentation/hwmon/userspace-tools | 2 +-
Documentation/hwmon/w83627ehf | 5 +-
Documentation/hwmon/w83627hf | 3 +-
Documentation/hwmon/w83781d | 22 +-
Documentation/hwmon/w83l786ng | 54 +++
Documentation/i2c/busses/i2c-piix4 | 2 +-
drivers/firmware/dmi_scan.c | 62 ++-
drivers/hwmon/Kconfig | 30 +-
drivers/hwmon/Makefile | 2 +
drivers/hwmon/abituguru3.c | 1 +
drivers/hwmon/adm1021.c | 1 -
drivers/hwmon/adm1025.c | 393 +++++++++--------
drivers/hwmon/adm1026.c | 632 +++++++++++++++------------
drivers/hwmon/adm1031.c | 501 ++++++++++-----------
drivers/hwmon/adm9240.c | 27 ++-
drivers/hwmon/ads7828.c | 297 +++++++++++++
drivers/hwmon/adt7470.c | 100 ++++-
drivers/hwmon/asb100.c | 395 ++++++++---------
drivers/hwmon/dme1737.c | 23 +-
drivers/hwmon/ds1621.c | 1 -
drivers/hwmon/f71805f.c | 6 +-
drivers/hwmon/f71882fg.c | 6 +-
drivers/hwmon/fscher.c | 1 -
drivers/hwmon/fschmd.c | 94 ++++-
drivers/hwmon/fscpos.c | 1 -
drivers/hwmon/gl518sm.c | 269 ++++++++----
drivers/hwmon/gl520sm.c | 648 +++++++++++++++++-----------
drivers/hwmon/it87.c | 88 ++++-
drivers/hwmon/lm75.c | 1 -
drivers/hwmon/lm77.c | 20 +-
drivers/hwmon/lm78.c | 7 +-
drivers/hwmon/lm80.c | 328 +++++++-------
drivers/hwmon/lm83.c | 1 -
drivers/hwmon/lm85.c | 64 +++-
drivers/hwmon/lm87.c | 29 +-
drivers/hwmon/lm90.c | 27 +-
drivers/hwmon/lm92.c | 1 -
drivers/hwmon/pc87360.c | 6 +-
drivers/hwmon/pc87427.c | 6 +-
drivers/hwmon/smsc47b397.c | 6 +-
drivers/hwmon/smsc47m1.c | 6 +-
drivers/hwmon/smsc47m192.c | 3 +-
drivers/hwmon/vt1211.c | 8 +-
drivers/hwmon/vt8231.c | 2 +-
drivers/hwmon/w83627ehf.c | 29 +-
drivers/hwmon/w83627hf.c | 225 ++++++++---
drivers/hwmon/w83781d.c | 49 +--
drivers/hwmon/w83791d.c | 6 +-
drivers/hwmon/w83793.c | 13 +-
drivers/hwmon/w83l785ts.c | 1 -
drivers/hwmon/w83l786ng.c | 821 +++++++++++++++++++++++++++++++++++
drivers/i2c/chips/eeprom.c | 1 -
drivers/i2c/chips/pcf8574.c | 1 -
drivers/i2c/chips/pcf8591.c | 1 -
include/linux/dmi.h | 3 +
include/linux/i2c-id.h | 36 --
60 files changed, 3689 insertions(+), 1731 deletions(-)
create mode 100644 Documentation/hwmon/ads7828
create mode 100644 Documentation/hwmon/w83l786ng
create mode 100644 drivers/hwmon/ads7828.c
create mode 100644 drivers/hwmon/w83l786ng.c
Darrick J. Wong (1):
hwmon: (adt7470) Support per-sensor alarm files
Hans de Goede (1):
hwmon: (fschmd) Read voltage scaling factors from BIOS DMI
Jean Delvare (49):
dmi: Let drivers walk the DMI table
hwmon: (lm78/w83781d) Probe fewer I2C addresses
hwmon: (lm87) Add support for the Analog Devices ADM1024
hwmon: (adm1025) Use dynamic sysfs callbacks
hwmon: (adm1025) Add individual alarm files
hwmon: (adm1025) Various cleanups
hwmon: (fschmd) Discard non-ASCII characters
hwmon: (gl518sm) Various cleanups
hwmon: (gl518sm) Don't create sysfs files for missing features
hwmon: (gl518sm) Refactor fan functions
hwmon: (gl518sm) Add individual alarm and beep files
hwmon: (gl518sm) Report error on invalid fan div value
hwmon: (gl518sm) Fix the reported fan speed
hwmon: (lm90) Use generic i2c reads during detection
hwmon: (gl520sm) Various cleanups
hwmon: (gl520sm) Put register addresses in arrays
hwmon: (gl520sm) De-macro the sysfs callbacks
hwmon: (gl520sm) Add individual alarm and beep files
hwmon: Update the lm-sensors website address
hwmon: Let the user override the detected Super-I/O device ID
hwmon: (it87) Discard a dead e-mail address
hwmon: (it87) Add individual alarm files
hwmon: (adm1026) Add individual alarm files
hwmon: (adm1026) Whitespace cleanups
hwmon: (adm1026) More cleanups (updated)
hwmon: (adm1026) Don't create files for missing inputs
hwmon: (w83781d) Drop W83627HF support
hwmon: (w83781d) Misc cleanups
hwmon: (it87) Delete pwmN_freq files on driver removal
hwmon: (adm1031) Fix register overwrite in set_fan_div()
hwmon: (adm1031) Various cleanups
hwmon: (adm1031) Get rid of macro-generated wrappers
hwmon: (adm1031) Add individual alarm and fault files
hwmon: (lm85) Return standard values in pwmN_enable
hwmon: (lm85) Make the pwmN_enable files writable
hwmon: Discard useless I2C driver IDs
hwmon: (lm77) Add individual alarm files
hwmon: (adm9240) Add individual alarm files
hwmon: VRM is not written to registers
hwmon: (asb100) Various cleanups
hwmon: (asb100) De-macro the sysfs callbacks
hwmon: (asb100) Add individual alarm files
hwmon: (w83627ehf) The W83627DHG has 8 VID pins
hwmon: (w83627hf) Enable VBAT monitoring
hwmon: (w83627hf) Add individual alarm and beep files
hwmon: (w83627hf) Refactor beep enable handling
hwmon: (lm80) Various cleanups
hwmon: (lm80) De-macro the sysfs callbacks
hwmon: (lm80) Add individual alarm files
Joe Perches (1):
hwmon: (vt8231) Add missing "space"
Juerg Haefliger (2):
hwmon: (dme1737) fix divide-by-0
hwmon: (dme1737) fix Super-IO device ID override
Kevin Lo (1):
hwmon: Add support for Winbond W83L786NG/NR
Nicolas Kaiser (1):
hwmon: (w83793) remove duplicated defines
Robert P. J. Day (1):
hwmon: (adt7470) Replace power-of-two test
Sergey Vlasov (1):
hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 Pro
Steve Hardy (1):
hwmon: Add support for Texas Instruments/Burr-Brown ADS7828
--
Mark M. Hoffman
mhoffman@lightlink.com
reply other threads:[~2008-02-08 3:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080208030129.GA22919@jupiter.solarsys.private \
--to=mhoffman@lightlink.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®