From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
To: "Németh Márton" <nm127@freemail.hu>
Cc: Richard Purdie <rpurdie@rpsys.net>, LKML <linux-kernel@vger.kernel.org>
Subject: Re: [GIT PULL] LED updates
Date: Fri, 8 Feb 2008 09:20:40 -0200 [thread overview]
Message-ID: <20080208112040.GA9485@khazad-dum.debian.net> (raw)
In-Reply-To: <47ABFEC5.8010206@freemail.hu>
On Fri, 08 Feb 2008, Németh Márton wrote:
> Richard Purdie wrote:
> >>> leds: Add support for hardware accelerated LED flashing
> >> This one has a loose end: when you call brightness_set on a led with
> >> hardware flash acceleration, you will leave the trigger armed, BUT the led
> >> won't blink anymore. That's just wrong.
> >
> > Agreed.
>
> My only question is that do you know any LED hardware which can blink _and_
> can set the brightness independently? If there would be such a LED I could
Several, but none on laptops or other stuff that runs Linux. That behaviour
is not common on indicator LEDs. I have seen standby LEDs on laptops which
"blink" by slowly fading from full to off, and then back to full, though.
> imagine that the brightness can be changed while the LED remains blinking at
> some low frequency. For example a simple LED with brightness set possibility and
> blinking directed by software is an example where the blinking and the brightness
> setting are completely independent.
Sure, it is perfectly possible. I am not sure it is *desireable*, though.
The way we have triggers work make what you describe impossible right now,
the software triggers are LED_OFF:LED_FULL, not LED_OFF:old-brightness.
And so are the common hardware triggers on laptops, for that matter.
If we go and fix every trigger to use the current brightness (as long as it
is non-zero) as the "turn LED on" trigger event, then the documentation has
to be changed accordingly to do what you said above, and we would stop the
trigger only by setting brightness to zero or by explicitly removing it.
I don't think it is worth the hassle, though. But we better decide that
*now*, because all this changing of the LED class ABI (even if it is, IMHO,
a big improvement) is not a good idea. We better do it all during the
2.6.25 cycle.
--
"One disk to rule them all, One disk to find them. One disk to bring
them all and in the darkness grind them. In the Land of Redmond
where the shadows lie." -- The Silicon Valley Tarot
Henrique Holschuh
next prev parent reply other threads:[~2008-02-08 11:21 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-07 10:35 Richard Purdie
2008-02-07 21:38 ` Henrique de Moraes Holschuh
2008-02-07 22:13 ` Richard Purdie
2008-02-07 23:23 ` [PATCH] leds: disable triggers on brightness set Henrique de Moraes Holschuh
2008-02-10 11:52 ` Németh Márton
2008-02-17 23:30 ` Richard Purdie
2008-02-18 1:59 ` Henrique de Moraes Holschuh
2008-02-08 7:03 ` [GIT PULL] LED updates Németh Márton
2008-02-08 11:20 ` Henrique de Moraes Holschuh [this message]
2008-02-10 11:52 ` Németh Márton
2008-03-16 18:18 ` Henrique de Moraes Holschuh
2008-03-16 19:29 ` Richard Purdie
2008-03-16 19:48 ` Henrique de Moraes Holschuh
2008-03-17 3:34 ` LED naming standard for LED class Henrique de Moraes Holschuh
2008-03-17 9:51 ` Richard Purdie
2008-03-18 3:35 ` Henrique de Moraes Holschuh
2008-03-18 4:55 ` Henrique de Moraes Holschuh
-- strict thread matches above, loose matches on Subject: below --
2007-10-11 21:38 [GIT PULL] LED updates Richard Purdie
2007-07-16 8:39 Richard Purdie
2007-02-15 22:18 Richard Purdie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080208112040.GA9485@khazad-dum.debian.net \
--to=hmh@hmh.eng.br \
--cc=linux-kernel@vger.kernel.org \
--cc=nm127@freemail.hu \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®