From: Jason Baron <jbaron@redhat.com>
To: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: akpm@linux-foundation.org, Ingo Molnar <mingo@elte.hu>,
linux-kernel@vger.kernel.org,
Rusty Russell <rusty@rustcorp.com.au>
Subject: [patch 1/2] add ALL_CPUS option to stop_machine_run()
Date: Thu, 28 Feb 2008 11:33:03 -0500 [thread overview]
Message-ID: <20080228163303.GA6195@redhat.com> (raw)
In-Reply-To: <20080227190519.GA14335@Krystal>
-allow stop_mahcine_run() to call a function on all cpus. Calling
stop_machine_run() with a 'ALL_CPUS' invokes this new behavior.
stop_machine_run() proceeds as normal until the calling cpu has
invoked 'fn'. Then, we tell all the other cpus to call 'fn'.
Signed-off-by: Jason Baron <jbaron@redhat.com>
---
include/linux/stop_machine.h | 8 +++++++-
kernel/stop_machine.c | 33 +++++++++++++++++++++++----------
2 files changed, 30 insertions(+), 11 deletions(-)
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index 5bfc553..18af011 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -8,11 +8,17 @@
#include <asm/system.h>
#if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
+
+#define ALL_CPUS ~0U
+
/**
* stop_machine_run: freeze the machine on all CPUs and run this function
* @fn: the function to run
* @data: the data ptr for the @fn()
- * @cpu: the cpu to run @fn() on (or any, if @cpu == NR_CPUS.
+ * @cpu: if @cpu == n, run @fn() on cpu n
+ * if @cpu == NR_CPUS, run @fn() on any cpu
+ * if @cpu == ALL_CPUS, run @fn() first on the calling cpu, and then
+ * concurrently on all the other cpus
*
* Description: This causes a thread to be scheduled on every other cpu,
* each of which disables interrupts, and finally interrupts are disabled
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 51b5ee5..c75b4f4 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -23,9 +23,17 @@ enum stopmachine_state {
STOPMACHINE_WAIT,
STOPMACHINE_PREPARE,
STOPMACHINE_DISABLE_IRQ,
+ STOPMACHINE_RUN,
STOPMACHINE_EXIT,
};
+struct stop_machine_data {
+ int (*fn)(void *);
+ void *data;
+ struct completion done;
+ int run_all;
+} smdata;
+
static enum stopmachine_state stopmachine_state;
static unsigned int stopmachine_num_threads;
static atomic_t stopmachine_thread_ack;
@@ -35,6 +43,7 @@ static int stopmachine(void *cpu)
{
int irqs_disabled = 0;
int prepared = 0;
+ int ran = 0;
set_cpus_allowed(current, cpumask_of_cpu((int)(long)cpu));
@@ -59,6 +68,11 @@ static int stopmachine(void *cpu)
prepared = 1;
smp_mb(); /* Must read state first. */
atomic_inc(&stopmachine_thread_ack);
+ } else if (stopmachine_state == STOPMACHINE_RUN && !ran) {
+ smdata.fn(smdata.data);
+ ran = 1;
+ smp_mb(); /* Must read state first. */
+ atomic_inc(&stopmachine_thread_ack);
}
/* Yield in first stage: migration threads need to
* help our sisters onto their CPUs. */
@@ -136,12 +150,10 @@ static void restart_machine(void)
preempt_enable_no_resched();
}
-struct stop_machine_data
+static void run_other_cpus(void)
{
- int (*fn)(void *);
- void *data;
- struct completion done;
-};
+ stopmachine_set_state(STOPMACHINE_RUN);
+}
static int do_stop(void *_smdata)
{
@@ -151,6 +163,8 @@ static int do_stop(void *_smdata)
ret = stop_machine();
if (ret == 0) {
ret = smdata->fn(smdata->data);
+ if (smdata->run_all)
+ run_other_cpus();
restart_machine();
}
@@ -170,17 +184,16 @@ static int do_stop(void *_smdata)
struct task_struct *__stop_machine_run(int (*fn)(void *), void *data,
unsigned int cpu)
{
- struct stop_machine_data smdata;
struct task_struct *p;
+ down(&stopmachine_mutex);
smdata.fn = fn;
smdata.data = data;
+ smdata.run_all = (cpu == ALL_CPUS) ? 1 : 0;
init_completion(&smdata.done);
-
- down(&stopmachine_mutex);
-
+ smp_wmb(); /* make sure other cpus see smdata updates */
/* If they don't care which CPU fn runs on, bind to any online one. */
- if (cpu == NR_CPUS)
+ if (cpu == NR_CPUS || cpu == ALL_CPUS)
cpu = raw_smp_processor_id();
p = kthread_create(do_stop, &smdata, "kstopmachine");
next prev parent reply other threads:[~2008-02-28 16:38 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-02 21:08 [patch 0/7] Immediate Values Mathieu Desnoyers
2008-02-02 21:08 ` [patch 1/7] Immediate Values - Architecture Independent Code Mathieu Desnoyers
2008-02-26 22:52 ` Jason Baron
2008-02-26 23:12 ` Mathieu Desnoyers
2008-02-26 23:34 ` Mathieu Desnoyers
2008-02-27 16:44 ` Jason Baron
2008-02-27 17:01 ` Jason Baron
2008-02-27 19:05 ` Mathieu Desnoyers
2008-02-28 16:33 ` Jason Baron [this message]
2008-02-28 22:09 ` [patch 1/2] add ALL_CPUS option to stop_machine_run() Max Krasnyanskiy
2008-02-28 22:14 ` Mathieu Desnoyers
2008-02-29 2:39 ` Jason Baron
2008-02-29 9:00 ` Ingo Molnar
2008-02-29 18:24 ` Max Krasnyanskiy
2008-02-29 19:15 ` Ingo Molnar
2008-02-29 19:58 ` Max Krasnyanskiy
2008-03-03 4:12 ` Rusty Russell
2008-03-04 0:30 ` Max Krasnyanskiy
2008-03-04 2:36 ` Rusty Russell
2008-03-04 4:11 ` Max Krasnyansky
2008-03-02 23:32 ` Rusty Russell
2008-02-28 16:37 ` [patch 2/2] implement immediate updating via stop_machine_run() Jason Baron
2008-02-29 13:43 ` Mathieu Desnoyers
2008-02-28 16:50 ` [patch 1/7] Immediate Values - Architecture Independent Code Jason Baron
2008-02-02 21:08 ` [patch 2/7] Immediate Values - Kconfig menu in EMBEDDED Mathieu Desnoyers
2008-02-02 21:08 ` [patch 3/7] Immediate Values - x86 Optimization Mathieu Desnoyers
2008-02-02 21:08 ` [patch 4/7] Add text_poke and sync_core to powerpc Mathieu Desnoyers
2008-02-02 21:08 ` [patch 5/7] Immediate Values - Powerpc Optimization Mathieu Desnoyers
2008-02-02 21:08 ` [patch 6/7] Immediate Values - Documentation Mathieu Desnoyers
2008-02-02 21:08 ` [patch 7/7] Scheduler Profiling - Use Immediate Values Mathieu Desnoyers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080228163303.GA6195@redhat.com \
--to=jbaron@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@polymtl.ca \
--cc=mingo@elte.hu \
--cc=rusty@rustcorp.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome