[patch 2.6.25-rc5] kerneldoc for <linux/clk.h>

[David Brownell <david-b@pacbell.net>]

Add <linux/clk.h> to the generated kerneldoc, with some overview
to go along with those per-function descriptions.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
 Documentation/DocBook/kernel-api.tmpl |   55 ++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

--- g26.orig/Documentation/DocBook/kernel-api.tmpl	2008-03-10 16:44:57.000000000 -0700
+++ g26/Documentation/DocBook/kernel-api.tmpl	2008-03-10 18:52:11.000000000 -0700
@@ -650,4 +650,59 @@ X!Idrivers/video/console/fonts.c
 !Edrivers/i2c/i2c-core.c
   </chapter>
 
+  <chapter id="clk">
+     <title>Clock Framework</title>
+
+     <para>
+	The clock framework defines programming interfaces to support
+	software management of the system clock tree.
+	This framework is widely used with System-On-Chip (SOC) platforms
+	to support power management and various devices which may need
+	custom clock rates.
+	Note that these "clocks" don't relate to timekeeping or real
+	time clocks (RTCs), each of which have separate frameworks.
+	These <structname>struct clk</structname> instances may be used
+	to manage for example a 96 MHz signal that is used to shift bits
+	into and out of peripherals or busses, or otherwise trigger
+	synchronous state machine transitions in system hardware.
+     </para>
+
+     <para>
+	Power management is supported by explicit software clock gating:
+	unused clocks are disabled, so the system doesn't waste power
+	changing the state of transistors that aren't in active use.
+	On some systems this may be backed by hardware clock gating.
+	Circuits will still have leakage current to be managed, which
+	costs more with finer cicuit geometries, but for CMOS circuits
+	power is mostly spent by clocked state changes.
+	Sections of chips that are powered but not clocked may be able
+	to retain their last state.
+	This low power state is often called a <emphasis>retention
+	mode</emphasis>, in contrast to <emphasis>off</emphasis> where
+	power is cut and no state is retained but where leakage currents
+	may have a significant impact on battery life.
+     </para>
+
+     <para>
+	Power-aware drivers only enable their clocks when the device
+	they manage is in active use.  Also, system sleep states often
+	differ according to which clock domains are active:  while a
+	"standby" state may allow wakeup from several active domains, a
+	"mem" (suspend-to-RAM) state may require a more wholesale shutdown
+	of clocks derived from higher speed PLLs and oscillators, limiting
+	the number of possible wakeup event sources.  A driver's suspend
+	method may need to be aware of system-specific clock constraints
+	on the target sleep state.
+     </para>
+
+     <para>
+        Some platforms support programmable clock generators.  These
+	can be used by external chips of various kinds, such as other
+	CPUs, multimedia codecs, and devices with strict requirements
+	for interface clocking.
+     </para>
+
+!Iinclude/linux/clk.h
+  </chapter>
+
 </book>