From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: Justin Madru <jdm64@gawab.com>
Cc: lkml <linux-kernel@vger.kernel.org>
Subject: Re: [Regression: 2.6.25-rc5: Blank Screen: Intel 945]
Date: Fri, 14 Mar 2008 10:29:38 -0700 [thread overview]
Message-ID: <200803141029.38124.jbarnes@virtuousgeek.org> (raw)
In-Reply-To: <47D9FD71.5080909@gawab.com>
On Thursday, March 13, 2008 9:22 pm Justin Madru wrote:
> Jesse Barnes wrote:
> > Well, the blank screen is probably due to a pipe programming timing
> > problem. IGD devices have been getting less & less sensitive to it over
> > time (830s would hang if you looked at them the wrong way) but it's still
> > not that hard to mis-program them.
> >
> > Can you narrow down the problem at all? Did it occur just after a kernel
> > upgrade? Or did you also upgrade your X driver? There haven't been any
> > real changes in intelfb since Oct. when Krzysztof added interlaced mode
> > support, so it's weird that you're just seeing problems now...
>
> Not that I can think of. Other than a custom kernel I use standard
> Ubuntu 7.10. I was testing out the kernel starting with 2.6.23-rc4 and
> I've tested each rc, recompiling when a new one came out (except for rc1
> and rc2, they didn't compile). So, when 2.6.25-rc3 came out I recompiled
> and came across this error.
It would be interesting if you could get register dumps at a couple of
different points, using the intel_reg_dumper tool in
git://git.freedesktop.org/git/xorg/driver/xf86-video-intel (in
src/reg_dumper). You'll probably have to modify your boot scripts though.
It would be good to get them:
- at startup time before the splash screen
- sometime while the splash screen is running
- after X starts and you see the blank screen
Since I think this is actually an X driver bug, can you file a bug at
freedesktop.org and attach the register dumps there?
>
> I've removed all fb devices and the blank screen _almost_ never happens
> (also, I _don't_ have to disable the splash screen). There is one
> _big_exception_ the problem still happens when I'm at my University (and
> _very_ consistently). There, I have to disable the splash screen, and
> that ~mostly~ fixes the problem.
What's different between your Uni. environment and your home environment?
> I can't believe it could be related, but when I boot the computer at the
> Univ. I get a flood of kernel messages related to the wireless all the
>
> time, but still connect:
> > kernel: wlan0_rename: RX too short data frame payload
>
> _Could_ a wireless problem be related to a graphics's problem? I
> wouldn't think so? But, it would explain why I get the blank screen
> mostly when I get the wireless problem. But, then again it could be
> another problem altogether.
Well, it's possible that the wireless issue is affecting the pipe programming
timing enough to expose the bug (stuff like this is usually a problem with
either not waiting for a register program to take effect and/or programming
the regs in the wrong order).
> > I think the only thing you'll lose is the boot splash screen.
>
> I did disable fb correctly right? Because I still have a boot splash
> screen.
Yeah, looks like it's off. Ubuntu may be falling back to using the X vesa
driver or something though...
Jesse
next prev parent reply other threads:[~2008-03-14 17:29 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-12 19:02 Justin Madru
2008-03-12 19:36 ` Jesse Barnes
[not found] ` <47D8BF6A.9020905@gawab.com>
2008-03-13 17:09 ` Jesse Barnes
2008-03-14 4:22 ` Justin Madru
2008-03-14 17:29 ` Jesse Barnes [this message]
2008-03-15 3:48 ` Justin Madru
2008-03-15 17:35 ` Jesse Barnes
2008-03-15 18:16 ` Bryce Harrington
2008-03-17 1:28 ` Justin Madru
2008-03-18 19:07 ` Bryce Harrington
2008-03-18 20:00 ` Jesse Barnes
2008-03-18 20:53 ` Bryce Harrington
2008-03-18 21:14 ` Bryce Harrington
2008-03-18 21:17 ` Jesse Barnes
2008-03-19 23:38 ` Justin Madru
2008-03-19 23:48 ` Jesse Barnes
2008-03-20 2:00 ` Bryce Harrington
2008-03-25 3:07 ` Justin Madru
2008-03-25 20:08 ` Jesse Barnes
2008-03-26 18:32 ` Justin Madru
2008-03-31 19:24 ` Justin Madru
2008-04-01 20:22 ` Jesse Barnes
2008-04-09 4:56 ` Justin Madru
2008-04-09 15:24 ` Jesse Barnes
2008-04-14 3:46 ` Justin Madru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803141029.38124.jbarnes@virtuousgeek.org \
--to=jbarnes@virtuousgeek.org \
--cc=jdm64@gawab.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome