w1_therm.c 1.3 1.4 1.10
Use the strong pullup not the sleep.  Note that the pullup goes before
W1_CONVERT_TEMP not after.
+w1_next_pullup(dev, tm);
 w1_write_8(dev, W1_CONVERT_TEMP);
-msleep(tm);

Signed-off-by: David Fries <david@fries.net>
---
 drivers/w1/slaves/w1_therm.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index fb28aca..dd26db2 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -192,10 +192,10 @@ static ssize_t w1_therm_read_bin(struct kobject *kobj,
 			int count = 0;
 			unsigned int tm = 750;
 
+			/* 750ms strong pullup (or delay) after the convert */
+			w1_next_pullup(dev, tm);
 			w1_write_8(dev, W1_CONVERT_TEMP);
 
-			msleep(tm);
-
 			if (!w1_reset_select_slave(sl)) {
 
 				w1_write_8(dev, W1_READ_SCRATCHPAD);
-- 
1.4.4.4