From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760282AbYDKL4W (ORCPT ); Fri, 11 Apr 2008 07:56:22 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750853AbYDKL4F (ORCPT ); Fri, 11 Apr 2008 07:56:05 -0400 Received: from hades.rz.tu-clausthal.de ([139.174.2.20]:62738 "EHLO hades.rz.tu-clausthal.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750803AbYDKL4A (ORCPT ); Fri, 11 Apr 2008 07:56:00 -0400 From: Volker Armin Hemmann To: Tejun Heo Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3 Date: Fri, 11 Apr 2008 13:55:55 +0200 User-Agent: KMail/1.9.9 Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, Peer Chen , Kuan Luo References: <200803091922.33083.volker.armin.hemmann@tu-clausthal.de> <200804031347.20352.volker.armin.hemmann@tu-clausthal.de> <47FEFFC6.4@gmail.com> In-Reply-To: <47FEFFC6.4@gmail.com> MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_LH1/HQBIbZUHZo6" Message-Id: <200804111355.55364.volker.armin.hemmann@tu-clausthal.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org --Boundary-00=_LH1/HQBIbZUHZo6 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, > Aiee.... Can you please try 2.6.25-rc8 with both configurations? And > w/o systemrescuecd? Just seeing whether things mount properly or not is > good enough. There isn't much risk of losing data. 2.6.25-rc8 is a 'no change'. AHCI+pci=3Dnomsi boots, AHCI without hangs. with AHCI I also get this: [ 0.363828] ------------[ cut here ]------------ [ 0.363828] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a= () [ 0.363828] Modules linked in: [ 0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2 [ 0.363828] [ 0.363828] Call Trace: [ 0.363828] [] warn_on_slowpath+0x51/0x63 [ 0.363832] [] __ioremap+0x8/0x197 [ 0.363872] [] pci_conf1_read+0xb2/0xbd [ 0.363911] [] pcim_iomap_release+0x0/0x2c [ 0.363950] [] pcim_iomap_release+0x0/0x2c [ 0.363989] [] devres_find+0x4b/0x65 [ 0.364028] [] ahci_init_one+0x190/0xa3a [ 0.364067] [] sysfs_addrm_finish+0x1d/0x209 [ 0.364107] [] ifind+0x34/0x8d [ 0.364145] [] sysfs_find_dirent+0x1b/0x2f [ 0.364184] [] ida_get_new_above+0xf0/0x180 [ 0.364223] [] sysfs_addrm_finish+0x1d/0x209 [ 0.364263] [] sysfs_create_link+0xb6/0x102 [ 0.364303] [] pci_device_probe+0x4c/0x72 [ 0.364342] [] driver_probe_device+0xb5/0x132 [ 0.364381] [] __driver_attach+0x6f/0xaf [ 0.364419] [] __driver_attach+0x0/0xaf [ 0.364458] [] __driver_attach+0x0/0xaf [ 0.364498] [] bus_for_each_dev+0x44/0x6f [ 0.364538] [] proc_match+0x23/0x2d [ 0.364576] [] bus_add_driver+0xae/0x1f4 [ 0.364614] [] driver_register+0x59/0xce [ 0.364654] [] __pci_register_driver+0x4a/0x7d [ 0.364701] [] kernel_init+0x14f/0x2b9 [ 0.364740] [] child_rip+0xa/0x12 [ 0.364779] [] kernel_init+0x0/0x2b9 [ 0.364817] [] child_rip+0x0/0x12 [ 0.364854] [ 0.364891] ---[ end trace ea9d541113ecaf1e ]--- [ 1.370495] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x= f=20 impl SATA mode [ 1.370495] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 1.370495] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.370495] scsi0 : ahci [ 1.370506] scsi1 : ahci [ 1.370515] scsi2 : ahci [ 1.370524] scsi3 : ahci Gl=C3=BCck Auf, Volker --Boundary-00=_LH1/HQBIbZUHZo6 Content-Type: application/octet-stream; name="dmesg_2.6.25-rc8_ahci_nomsi" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg_2.6.25-rc8_ahci_nomsi" [ 0.000000] Linux version 2.6.25-rc8 (root@energy) (gcc version 4.2.3 (G= entoo 4.2.3 p1.0)) #2 SMP Fri Apr 11 13:26:53 CEST 2008 [ 0.000000] Command line: pci=3Dnomsi root=3D/dev/sda3 nmi_watchdog=3D0 = console=3Dtty63A=8BL$=08=89=C8A=0F=AFD$@H=98H=8D=04=02H9=C5s=1BH)=D5Hc=D1H= =89=E8H=89=D1H=99H=F7=F91=C0H=85=D2=0F=94=C0=EB=021=C0A\Z[]A\=C3H=85=FFSu= =04=0F=0B=EB=FE1=C0H=83=FF=10=0F=84=87 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 u= sed [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of = 256 used [ 0.000000] end_pfn_map =3D 1245184 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT = 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT = 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL = 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT = 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT = 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT = 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT = 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD = 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 u= sed [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of = 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE [ 0.000000] early res: 2 [200000-54e213] TEXT DATA BSS [ 0.000000] early res: 3 [9fc00-a0bff] EBDA [ 0.000000] early res: 4 [8000-dfff] PGTABLE [ 0.000000] No mptable found. [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 = on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 = on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 = on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 = on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 = on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 = on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 = on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 = on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 = on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 = on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 = on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 = on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 = on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 = on node 0 [ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 = on node 0 [ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 = on node 0 [ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 = on node 0 [ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 = on node 0 [ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 = on node 0 [ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 = on node 0 [ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 = on node 0 [ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 = on node 0 [ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 = on node 0 [ 0.000000] [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 = on node 0 [ 0.000000] [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 = on node 0 [ 0.000000] [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 = on node 0 [ 0.000000] [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 = on node 0 [ 0.000000] [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 = on node 0 [ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 = on node 0 [ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 = on node 0 [ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 = on node 0 [ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 = on node 0 [ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 = on node 0 [ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 = on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 856 pages reserved [ 0.000000] DMA zone: 3087 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000= a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000= e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 00000000001= 00000 [ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cff= c0000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cff= f0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d00= 00000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec= 01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff3= 80000 [ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 00000001000= 00000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000= :2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 32584 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l pages: 1030519 [ 0.000000] Kernel command line: pci=3Dnomsi root=3D/dev/sda3 nmi_watchd= og=3D0 console=3Dtty63A=8BL$=08=89=C8A=0F=AFD$@H=98H=8D=04=02H9=C5s=1BH)=D5= Hc=D1H=89=E8H=89=D1H=99H=F7=F91=C0H=85=D2=0F=94=C0=EB=021=C0A\Z[]A\=C3H=85= =FFSu=04=0F=0B=EB=FE1=C0H=83=FF=10=0F=84=87 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000002] time.c: Detected 3013.883 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty63] enabled [ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 = bytes) [ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 by= tes) [ 0.003333] Checking aperture... [ 0.003333] Node 0: aperture @ 8000000 size 32 MB [ 0.003333] Aperture pointing to e820 RAM. Ignoring. [ 0.003333] No AGP bridge found [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ c000000 [ 0.003333] PM: Registered nosave memory: 000000000c000000 - 00000000100= 00000 [ 0.003333] Memory: 4047752k/4980736k available (1994k kernel code, 1451= 36k reserved, 866k data, 192k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=3D12, HWalign=3D64, Order=3D0-1, MinObjects= =3D4, CPUs=3D2, Nodes=3D1 [ 0.003333] hpet clockevent registered [ 0.083330] Calibrating delay using timer specific routine.. 6034.75 Bog= oMIPS (lpj=3D10054001) [ 0.083419] Mount-cache hash table entries: 256 [ 0.083538] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.083579] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.083616] CPU: Physical Processor ID: 0 [ 0.083653] CPU: Processor Core ID: 0 [ 0.083702] ACPI: Core revision 20070126 [ 0.122315] Using local APIC timer interrupts. [ 0.123326] APIC timer calibration result 12557883 [ 0.123327] Detected 12.557 MHz APIC timer. [ 0.123430] Booting processor 1/2 APIC 0x1 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6030.96 Bog= oMIPS (lpj=3D10046346) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.216840] Brought up 2 CPUs [ 0.217287] net_namespace: 296 bytes [ 0.217406] NET: Registered protocol family 16 [ 0.217503] No dock devices found. [ 0.217565] ACPI: bus type pci registered [ 0.217642] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 0.217681] PCI: Not using MMCONFIG. [ 0.217718] PCI: Using configuration type 1 [ 0.220763] ACPI: EC: Look up EC in DSDT [ 0.225383] ACPI: Interpreter enabled [ 0.225421] ACPI: (supports S0 S1 S3 S4 S5) [ 0.225592] ACPI: Using IOAPIC for interrupt routing [ 0.225773] ACPI: Error attaching device data [ 0.225814] ACPI: Error attaching device data [ 0.225854] ACPI: Error attaching device data [ 0.225894] ACPI: Error attaching device data [ 0.232203] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.232716] PCI: Transparent bridge - 0000:00:08.0 [ 0.232966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.233124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.233433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.233499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.233565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.233631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.238118] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.238480] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 0.238840] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disab= led. [ 0.239226] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disab= led. [ 0.239612] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disab= led. [ 0.240130] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.240491] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disab= led. [ 0.240877] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.241237] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.241598] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disab= led. [ 0.241986] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.242347] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disab= led. [ 0.242734] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disab= led. [ 0.243120] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.243496] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disab= led. [ 0.243884] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.244244] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disab= led. [ 0.244657] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disab= led. [ 0.245045] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disab= led. [ 0.245432] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disab= led. [ 0.245760] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.245808] pnp: PnP ACPI init [ 0.245847] ACPI: bus type pnp registered [ 0.248984] pnp: PnP ACPI: found 13 devices [ 0.249021] ACPI: ACPI bus type pnp unregistered [ 0.249125] SCSI subsystem initialized [ 0.249198] libata version 3.00 loaded. [ 0.249237] usbcore: registered new interface driver usbfs [ 0.249287] usbcore: registered new interface driver hub [ 0.249342] usbcore: registered new device driver usb [ 0.249420] PCI: Using ACPI for IRQ routing [ 0.249458] PCI: If a device doesn't work, try "pci=3Drouteirq". If it = helps, post a report [ 0.266649] PCI-DMA: Disabling AGP. [ 0.266649] PCI-DMA: aperture base @ c000000 size 65536 KB [ 0.266649] PCI-DMA: using GART IOMMU. [ 0.266649] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.266649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.266649] hpet0: 3 32-bit timers, 25000000 Hz [ 0.266659] Switched to high resolution mode on CPU 0 [ 0.063372] Switched to high resolution mode on CPU 1 [ 0.280019] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.280019] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.280019] system 00:05: ioport range 0x2000-0x207f has been reserved [ 0.280019] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 0.280019] system 00:05: ioport range 0x2400-0x247f has been reserved [ 0.280019] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 0.280019] system 00:05: ioport range 0x2800-0x287f has been reserved [ 0.280022] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 0.280061] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [ 0.280101] system 00:05: ioport range 0x2c80-0x2cff has been reserved [ 0.280141] system 00:05: iomem range 0x0-0x0 could not be reserved [ 0.280181] system 00:05: iomem range 0xfee01000-0xfeefffff has been res= erved [ 0.280225] system 00:07: iomem range 0xfec00000-0xfec00fff could not be= reserved [ 0.280273] system 00:07: iomem range 0xfee00000-0xfee00fff could not be= reserved [ 0.280324] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.280367] system 00:0b: iomem range 0xe0000000-0xefffffff has been res= erved [ 0.280410] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.280450] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.280489] system 00:0c: iomem range 0xe0000-0xfffff could not be reser= ved [ 0.280533] system 00:0c: iomem range 0x100000-0xcfffffff could not be r= eserved [ 0.280581] system 00:0c: iomem range 0xff380000-0xffffffff could not be= reserved [ 0.281029] PCI: Bridge: 0000:00:08.0 [ 0.281066] IO window: d000-dfff [ 0.281103] MEM window: 0xf9f00000-0xf9ffffff [ 0.281142] PREFETCH window: 0x00000000f0000000-0x00000000f00fffff [ 0.281182] PCI: Bridge: 0000:00:0b.0 [ 0.281219] IO window: c000-cfff [ 0.281256] MEM window: 0xf9e00000-0xf9efffff [ 0.281293] PREFETCH window: disabled. [ 0.281331] PCI: Bridge: 0000:00:0c.0 [ 0.281367] IO window: disabled. [ 0.281403] MEM window: disabled. [ 0.281440] PREFETCH window: disabled. [ 0.281478] PCI: Bridge: 0000:00:0d.0 [ 0.281514] IO window: e000-efff [ 0.281551] MEM window: 0xfa000000-0xfebfffff [ 0.281589] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.281628] PCI: Bridge: 0000:00:0e.0 [ 0.281665] IO window: disabled. [ 0.281701] MEM window: disabled. [ 0.281738] PREFETCH window: disabled. [ 0.281781] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.281790] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.281795] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.281800] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.281805] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.281812] NET: Registered protocol family 2 [ 0.316684] IP route cache hash table entries: 131072 (order: 8, 1048576= bytes) [ 0.316684] TCP established hash table entries: 262144 (order: 10, 41943= 04 bytes) [ 0.316684] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.316684] TCP: Hash tables configured (established 262144 bind 65536) [ 0.316684] TCP reno registered [ 0.326989] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma= jor 254) [ 0.326989] io scheduler noop registered [ 0.326989] io scheduler cfq registered (default) [ 0.326989] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:04:00.0: Boot video device [ 0.326997] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.326997] assign_interrupt_mode Found MSI capability [ 0.326997] Allocate Port Service[0000:00:0b.0:pcie00] [ 0.327004] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.327004] assign_interrupt_mode Found MSI capability [ 0.327004] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.327011] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.327011] assign_interrupt_mode Found MSI capability [ 0.327011] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.327017] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.327017] assign_interrupt_mode Found MSI capability [ 0.327017] Allocate Port Service[0000:00:0e.0:pcie00] [ 0.327058] input: Power Button (FF) as /class/input/input0 [ 0.327058] ACPI: Power Button (FF) [PWRF] [ 0.327064] input: Power Button (CM) as /class/input/input1 [ 0.327064] ACPI: Power Button (CM) [PWRB] [ 0.327097] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.327104] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.363785] Real Time Clock Driver v1.12ac [ 0.363789] hpet_resources: 0xfed00000 is busy [ 0.363796] Linux agpgart interface v0.103 [ 0.363815] Driver 'sd' needs updating - please use bus_type methods [ 0.363828] ahci 0000:00:0a.0: version 3.0 [ 0.363828] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.363828] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23= (level, low) -> IRQ 23 [ 0.363828] ------------[ cut here ]------------ [ 0.363828] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a= () [ 0.363828] Modules linked in: [ 0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2 [ 0.363828]=20 [ 0.363828] Call Trace: [ 0.363828] [] warn_on_slowpath+0x51/0x63 [ 0.363832] [] __ioremap+0x8/0x197 [ 0.363872] [] pci_conf1_read+0xb2/0xbd [ 0.363911] [] pcim_iomap_release+0x0/0x2c [ 0.363950] [] pcim_iomap_release+0x0/0x2c [ 0.363989] [] devres_find+0x4b/0x65 [ 0.364028] [] ahci_init_one+0x190/0xa3a [ 0.364067] [] sysfs_addrm_finish+0x1d/0x209 [ 0.364107] [] ifind+0x34/0x8d [ 0.364145] [] sysfs_find_dirent+0x1b/0x2f [ 0.364184] [] ida_get_new_above+0xf0/0x180 [ 0.364223] [] sysfs_addrm_finish+0x1d/0x209 [ 0.364263] [] sysfs_create_link+0xb6/0x102 [ 0.364303] [] pci_device_probe+0x4c/0x72 [ 0.364342] [] driver_probe_device+0xb5/0x132 [ 0.364381] [] __driver_attach+0x6f/0xaf [ 0.364419] [] __driver_attach+0x0/0xaf [ 0.364458] [] __driver_attach+0x0/0xaf [ 0.364498] [] bus_for_each_dev+0x44/0x6f [ 0.364538] [] proc_match+0x23/0x2d [ 0.364576] [] bus_add_driver+0xae/0x1f4 [ 0.364614] [] driver_register+0x59/0xce [ 0.364654] [] __pci_register_driver+0x4a/0x7d [ 0.364701] [] kernel_init+0x14f/0x2b9 [ 0.364740] [] child_rip+0xa/0x12 [ 0.364779] [] kernel_init+0x0/0x2b9 [ 0.364817] [] child_rip+0x0/0x12 [ 0.364854]=20 [ 0.364891] ---[ end trace ea9d541113ecaf1e ]--- [ 1.370495] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x= f impl SATA mode [ 1.370495] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio=20 [ 1.370495] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.370495] scsi0 : ahci [ 1.370506] scsi1 : ahci [ 1.370515] scsi2 : ahci [ 1.370524] scsi3 : ahci [ 1.370531] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc10= 0 irq 23 [ 1.370531] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc18= 0 irq 23 [ 1.370531] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc20= 0 irq 23 [ 1.370531] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc28= 0 irq 23 [ 1.806588] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.807084] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 1.807084] ata1.00: 312581808 sectors, multi 16: LBA48=20 [ 1.807625] ata1.00: configured for UDMA/133 [ 2.440038] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.460530] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 2.460530] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.462446] ata2.00: configured for UDMA/133 [ 2.779686] ata3: SATA link down (SStatus 0 SControl 300) [ 3.099550] ata4: SATA link down (SStatus 0 SControl 300) [ 3.298509] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10= =2E0 PQ: 0 ANSI: 5 [ 3.298522] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2 MB) [ 3.298522] sd 0:0:0:0: [sda] Write Protect is off [ 3.298522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.298522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.298522] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2 MB) [ 3.298522] sd 0:0:0:0: [sda] Write Protect is off [ 3.298522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.298522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.298522] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.132136] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.132147] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.132158] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR= 10 PQ: 0 ANSI: 5 [ 3.132158] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8 MB) [ 3.132158] sd 1:0:0:0: [sdb] Write Protect is off [ 3.132158] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.132158] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.132158] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8 MB) [ 3.132158] sd 1:0:0:0: [sdb] Write Protect is off [ 3.132158] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.132158] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.132158] sdb: sdb1 sdb2 [ 3.195925] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.195935] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.195955] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x6= 4 irq 1,12 [ 3.196343] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.196383] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.226067] usbcore: registered new interface driver usbhid [ 3.226067] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.226067] TCP cubic registered [ 3.226067] NET: Registered protocol family 1 [ 3.226072] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processo= r 6000+ processors (2 cpu cores) (version 2.20.00) [ 3.425640] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 3.425640] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 3.425640] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 3.425640] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 3.425640] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 3.425640] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 3.425640] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 3.425640] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 3.256943] input: AT Translated Set 2 keyboard as /class/input/input2 [ 3.356887] ReiserFS: sda3: found reiserfs format "3.6" with standard jo= urnal [ 3.356887] ReiserFS: sda3: using ordered data mode [ 3.368295] ReiserFS: sda3: journal params: device sda3, size 8192, jour= nal first block 18, max trans len 1024, max batch 900, max commit age 30, m= ax trans age 30 [ 3.368295] ReiserFS: sda3: checking transaction log (sda3) [ 3.411588] ReiserFS: sda3: Using r5 hash to sort names [ 3.411588] VFS: Mounted root (reiserfs filesystem) readonly. [ 3.411588] Freeing unused kernel memory: 192k freed [ 4.022298] Clocksource tsc unstable (delta =3D -141982313 ns) [ 8.607958] ReiserFS: sda3: switching to journaled data mode [ 8.961712] r8169 Gigabit Ethernet driver 2.2LK loaded [ 8.961947] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 8.961952] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19= (level, low) -> IRQ 19 [ 8.961960] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 8.961969] r8169 0000:01:00.0: no MSI. Back to INTx. [ 8.964900] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:c= b, XID 38000000 IRQ 19 [ 8.981596] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 8.981596] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22= (level, low) -> IRQ 22 [ 8.981596] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 8.981596] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 8.981617] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus = number 1 [ 8.981639] ehci_hcd 0000:00:02.1: debug port 1 [ 8.981642] PCI: cache line size of 64 is not supported by device 0000:0= 0:02.1 [ 8.981649] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [ 8.994942] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10= Dec 2004 [ 8.994942] usb usb1: configuration #1 chosen from 1 choice [ 8.994942] hub 1-0:1.0: USB hub found [ 8.994942] hub 1-0:1.0: 10 ports detected [ 9.413400] usb 1-3: new high speed USB device using ehci_hcd and addres= s 2 [ 9.494126] usb 1-3: configuration #1 chosen from 1 choice [ 9.494126] hub 1-3:1.0: USB hub found [ 9.494201] hub 1-3:1.0: 4 ports detected [ 9.623768] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 ac= ross:1951888k [ 9.820999] usb 1-3.1: new low speed USB device using ehci_hcd and addre= ss 3 [ 9.915859] usb 1-3.1: configuration #1 chosen from 1 choice [ 9.925950] input: Logitech USB Receiver as /class/input/input3 [ 10.088175] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-00= 00:00:02.1-3.1 [ 10.092051] input: Logitech USB Receiver as /class/input/input4 [ 10.165322] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0= 000:00:02.1-3.1 [ 10.272835] mice: PS/2 mouse device common for all mice [ 13.489248] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 13.491467] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18= (level, low) -> IRQ 18 [ 13.494833] Audigy2 value: Special config. [ 17.056969] i2c /dev entries driver [ 17.121265] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 17.121265] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [ 17.324605] w83627ehf: Found W83627EHG chip at 0x290 [ 18.452875] r8169: eth0: link up [ 18.521662] r8169: eth0: link up [ 19.665348] NET: Registered protocol family 17 --Boundary-00=_LH1/HQBIbZUHZo6 Content-Type: application/octet-stream; name="dmesg_2.6.25-rc8_nonraid" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg_2.6.25-rc8_nonraid" [ 0.000000] Linux version 2.6.25-rc8 (root@energy) (gcc version 4.2.3 (G= entoo 4.2.3 p1.0)) #2 SMP Fri Apr 11 13:26:53 CEST 2008 [ 0.000000] Command line: root=3D/dev/sda3 nmi_watchdog=3D0 console=3Dtt= y6=90=A8=01 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 u= sed [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of = 256 used [ 0.000000] end_pfn_map =3D 1245184 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT = 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT = 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL = 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT = 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT = 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT = 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT = 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD = 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 u= sed [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of = 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE [ 0.000000] early res: 2 [200000-54e213] TEXT DATA BSS [ 0.000000] early res: 3 [9fc00-a0bff] EBDA [ 0.000000] early res: 4 [8000-dfff] PGTABLE [ 0.000000] No mptable found. [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 = on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 = on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 = on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 = on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 = on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 = on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 = on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 = on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 = on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 = on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 = on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 = on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 = on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 = on node 0 [ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 = on node 0 [ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 = on node 0 [ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 = on node 0 [ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 = on node 0 [ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 = on node 0 [ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 = on node 0 [ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 = on node 0 [ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 = on node 0 [ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 = on node 0 [ 0.000000] [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 = on node 0 [ 0.000000] [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 = on node 0 [ 0.000000] [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 = on node 0 [ 0.000000] [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 = on node 0 [ 0.000000] [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 = on node 0 [ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 = on node 0 [ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 = on node 0 [ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 = on node 0 [ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 = on node 0 [ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 = on node 0 [ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 = on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 856 pages reserved [ 0.000000] DMA zone: 3087 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000= a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000= e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 00000000001= 00000 [ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cff= c0000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cff= f0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d00= 00000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec= 01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff3= 80000 [ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 00000001000= 00000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000= :2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 32584 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l pages: 1030519 [ 0.000000] Kernel command line: root=3D/dev/sda3 nmi_watchdog=3D0 conso= le=3Dtty6=90=A8=01 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000002] time.c: Detected 3013.883 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty6] enabled [ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 = bytes) [ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 by= tes) [ 0.003333] Checking aperture... [ 0.003333] Node 0: aperture @ c000000 size 32 MB [ 0.003333] Aperture pointing to e820 RAM. Ignoring. [ 0.003333] No AGP bridge found [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ c000000 [ 0.003333] PM: Registered nosave memory: 000000000c000000 - 00000000100= 00000 [ 0.003333] Memory: 4047752k/4980736k available (1994k kernel code, 1451= 36k reserved, 866k data, 192k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=3D12, HWalign=3D64, Order=3D0-1, MinObjects= =3D4, CPUs=3D2, Nodes=3D1 [ 0.003333] hpet clockevent registered [ 0.083330] Calibrating delay using timer specific routine.. 6034.74 Bog= oMIPS (lpj=3D10053996) [ 0.083419] Mount-cache hash table entries: 256 [ 0.083538] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.083578] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.083616] CPU: Physical Processor ID: 0 [ 0.083652] CPU: Processor Core ID: 0 [ 0.083701] ACPI: Core revision 20070126 [ 0.122313] Using local APIC timer interrupts. [ 0.123326] APIC timer calibration result 12557884 [ 0.123327] Detected 12.557 MHz APIC timer. [ 0.123429] Booting processor 1/2 APIC 0x1 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6030.96 Bog= oMIPS (lpj=3D10046340) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.216840] Brought up 2 CPUs [ 0.217287] net_namespace: 296 bytes [ 0.217406] NET: Registered protocol family 16 [ 0.217503] No dock devices found. [ 0.217564] ACPI: bus type pci registered [ 0.217641] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 0.217680] PCI: Not using MMCONFIG. [ 0.217717] PCI: Using configuration type 1 [ 0.220764] ACPI: EC: Look up EC in DSDT [ 0.225384] ACPI: Interpreter enabled [ 0.225421] ACPI: (supports S0 S1 S3 S4 S5) [ 0.225592] ACPI: Using IOAPIC for interrupt routing [ 0.225774] ACPI: Error attaching device data [ 0.225815] ACPI: Error attaching device data [ 0.225855] ACPI: Error attaching device data [ 0.225895] ACPI: Error attaching device data [ 0.232202] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.232716] PCI: Transparent bridge - 0000:00:08.0 [ 0.232967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.233319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.233435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.233501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.233567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.233633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.238119] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.238481] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 0.238841] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disab= led. [ 0.239227] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disab= led. [ 0.239613] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disab= led. [ 0.240130] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.240490] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disab= led. [ 0.240876] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.241236] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.241596] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disab= led. [ 0.241985] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.242346] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disab= led. [ 0.242733] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disab= led. [ 0.243120] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.243496] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disab= led. [ 0.243884] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.244245] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disab= led. [ 0.244658] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disab= led. [ 0.245046] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disab= led. [ 0.245433] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disab= led. [ 0.245761] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.245809] pnp: PnP ACPI init [ 0.245848] ACPI: bus type pnp registered [ 0.248987] pnp: PnP ACPI: found 13 devices [ 0.249024] ACPI: ACPI bus type pnp unregistered [ 0.249127] SCSI subsystem initialized [ 0.249201] libata version 3.00 loaded. [ 0.249239] usbcore: registered new interface driver usbfs [ 0.249290] usbcore: registered new interface driver hub [ 0.249344] usbcore: registered new device driver usb [ 0.249422] PCI: Using ACPI for IRQ routing [ 0.249460] PCI: If a device doesn't work, try "pci=3Drouteirq". If it = helps, post a report [ 0.266649] PCI-DMA: Disabling AGP. [ 0.266649] PCI-DMA: aperture base @ c000000 size 65536 KB [ 0.266649] PCI-DMA: using GART IOMMU. [ 0.266649] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.266649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.266649] hpet0: 3 32-bit timers, 25000000 Hz [ 0.266659] Switched to high resolution mode on CPU 0 [ 0.063372] Switched to high resolution mode on CPU 1 [ 0.280019] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.280019] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.280019] system 00:05: ioport range 0x2000-0x207f has been reserved [ 0.280019] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 0.280019] system 00:05: ioport range 0x2400-0x247f has been reserved [ 0.280019] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 0.280019] system 00:05: ioport range 0x2800-0x287f has been reserved [ 0.280019] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 0.280019] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [ 0.280019] system 00:05: ioport range 0x2c80-0x2cff has been reserved [ 0.280022] system 00:05: iomem range 0x0-0x0 could not be reserved [ 0.280062] system 00:05: iomem range 0xfee01000-0xfeefffff has been res= erved [ 0.280107] system 00:07: iomem range 0xfec00000-0xfec00fff could not be= reserved [ 0.280154] system 00:07: iomem range 0xfee00000-0xfee00fff could not be= reserved [ 0.280206] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.280249] system 00:0b: iomem range 0xe0000000-0xefffffff has been res= erved [ 0.280292] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.280331] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.280371] system 00:0c: iomem range 0xe0000-0xfffff could not be reser= ved [ 0.280416] system 00:0c: iomem range 0x100000-0xcfffffff could not be r= eserved [ 0.280464] system 00:0c: iomem range 0xff380000-0xffffffff could not be= reserved [ 0.280912] PCI: Bridge: 0000:00:08.0 [ 0.280949] IO window: d000-dfff [ 0.280987] MEM window: 0xf9f00000-0xf9ffffff [ 0.281025] PREFETCH window: 0x00000000f0000000-0x00000000f00fffff [ 0.281066] PCI: Bridge: 0000:00:0b.0 [ 0.281102] IO window: c000-cfff [ 0.281139] MEM window: 0xf9e00000-0xf9efffff [ 0.281177] PREFETCH window: disabled. [ 0.281214] PCI: Bridge: 0000:00:0c.0 [ 0.281250] IO window: disabled. [ 0.281287] MEM window: disabled. [ 0.281323] PREFETCH window: disabled. [ 0.281361] PCI: Bridge: 0000:00:0d.0 [ 0.281398] IO window: e000-efff [ 0.281434] MEM window: 0xfa000000-0xfebfffff [ 0.281472] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.281512] PCI: Bridge: 0000:00:0e.0 [ 0.281548] IO window: disabled. [ 0.281585] MEM window: disabled. [ 0.281621] PREFETCH window: disabled. [ 0.281664] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.281673] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.281678] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.281683] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.281688] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.281695] NET: Registered protocol family 2 [ 0.316684] IP route cache hash table entries: 131072 (order: 8, 1048576= bytes) [ 0.316684] TCP established hash table entries: 262144 (order: 10, 41943= 04 bytes) [ 0.316684] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.316684] TCP: Hash tables configured (established 262144 bind 65536) [ 0.316684] TCP reno registered [ 0.326989] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma= jor 254) [ 0.326989] io scheduler noop registered [ 0.326989] io scheduler cfq registered (default) [ 0.326989] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.326989] pci 0000:04:00.0: Boot video device [ 0.326997] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.326997] assign_interrupt_mode Found MSI capability [ 0.326997] Allocate Port Service[0000:00:0b.0:pcie00] [ 0.327004] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.327004] assign_interrupt_mode Found MSI capability [ 0.327004] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.327011] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.327011] assign_interrupt_mode Found MSI capability [ 0.327011] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.327017] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.327017] assign_interrupt_mode Found MSI capability [ 0.327017] Allocate Port Service[0000:00:0e.0:pcie00] [ 0.327058] input: Power Button (FF) as /class/input/input0 [ 0.327058] ACPI: Power Button (FF) [PWRF] [ 0.327065] input: Power Button (CM) as /class/input/input1 [ 0.327065] ACPI: Power Button (CM) [PWRB] [ 0.327097] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.327104] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.363809] Real Time Clock Driver v1.12ac [ 0.363813] hpet_resources: 0xfed00000 is busy [ 0.363820] Linux agpgart interface v0.103 [ 0.363839] Driver 'sd' needs updating - please use bus_type methods [ 0.363852] ahci 0000:00:0a.0: version 3.0 [ 0.363852] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.363852] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23= (level, low) -> IRQ 23 [ 1.367186] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x= f impl IDE mode [ 1.367186] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio=20 [ 1.367186] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.367186] scsi0 : ahci [ 1.367196] scsi1 : ahci [ 1.367205] scsi2 : ahci [ 1.367215] scsi3 : ahci [ 1.367222] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc10= 0 irq 315 [ 1.367222] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc18= 0 irq 315 [ 1.367222] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc20= 0 irq 315 [ 1.367222] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc28= 0 irq 315 [ 1.805203] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.805703] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 1.805703] ata1.00: 312581808 sectors, multi 16: LBA48=20 [ 1.806245] ata1.00: configured for UDMA/133 [ 2.438148] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.446973] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 2.446973] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.448887] ata2.00: configured for UDMA/133 [ 2.767796] ata3: SATA link down (SStatus 0 SControl 300) [ 3.087660] ata4: SATA link down (SStatus 0 SControl 300) [ 3.283879] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10= =2E0 PQ: 0 ANSI: 5 [ 3.283892] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2 MB) [ 3.283892] sd 0:0:0:0: [sda] Write Protect is off [ 3.283892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.283892] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.283892] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2 MB) [ 3.283892] sd 0:0:0:0: [sda] Write Protect is off [ 3.283892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.283892] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.283892] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.119376] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.119479] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.119612] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR= 10 PQ: 0 ANSI: 5 [ 3.119742] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8 MB) [ 3.119790] sd 1:0:0:0: [sdb] Write Protect is off [ 3.119828] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.119843] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.119921] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8 MB) [ 3.119968] sd 1:0:0:0: [sdb] Write Protect is off [ 3.120005] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.120020] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.120069] sdb: sdb1 sdb2 [ 3.128202] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.128213] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.128226] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x6= 4 irq 1,12 [ 3.130473] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.130513] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.158253] usbcore: registered new interface driver usbhid [ 3.158253] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.158253] TCP cubic registered [ 3.158253] NET: Registered protocol family 1 [ 3.158259] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processo= r 6000+ processors (2 cpu cores) (version 2.20.00) [ 3.349195] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 3.349195] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 3.349195] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 3.349195] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 3.349195] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 3.349195] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 3.349195] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 3.349195] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 3.189923] input: AT Translated Set 2 keyboard as /class/input/input2 [ 3.289135] ReiserFS: sda3: found reiserfs format "3.6" with standard jo= urnal [ 3.289179] ReiserFS: sda3: using ordered data mode [ 3.300193] ReiserFS: sda3: journal params: device sda3, size 8192, jour= nal first block 18, max trans len 1024, max batch 900, max commit age 30, m= ax trans age 30 [ 3.300193] ReiserFS: sda3: checking transaction log (sda3) [ 3.346227] ReiserFS: sda3: Using r5 hash to sort names [ 3.346227] VFS: Mounted root (reiserfs filesystem) readonly. [ 3.346227] Freeing unused kernel memory: 192k freed [ 3.954164] Clocksource tsc unstable (delta =3D -141984678 ns) [ 8.556079] ReiserFS: sda3: switching to journaled data mode [ 8.911115] r8169 Gigabit Ethernet driver 2.2LK loaded [ 8.911349] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 8.911354] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19= (level, low) -> IRQ 19 [ 8.911362] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 8.911729] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:c= b, XID 38000000 IRQ 314 [ 8.957473] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 8.957478] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22= (level, low) -> IRQ 22 [ 8.957486] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 8.957487] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 8.957554] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus = number 1 [ 8.957577] ehci_hcd 0000:00:02.1: debug port 1 [ 8.957579] PCI: cache line size of 64 is not supported by device 0000:0= 0:02.1 [ 8.957587] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [ 8.967141] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10= Dec 2004 [ 8.967222] usb usb1: configuration #1 chosen from 1 choice [ 8.967238] hub 1-0:1.0: USB hub found [ 8.967244] hub 1-0:1.0: 10 ports detected [ 9.317253] usb 1-3: new high speed USB device using ehci_hcd and addres= s 2 [ 9.465010] usb 1-3: configuration #1 chosen from 1 choice [ 9.465270] hub 1-3:1.0: USB hub found [ 9.465472] hub 1-3:1.0: 4 ports detected [ 9.592382] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 ac= ross:1951888k [ 9.784528] usb 1-3.1: new low speed USB device using ehci_hcd and addre= ss 3 [ 9.872170] usb 1-3.1: configuration #1 chosen from 1 choice [ 9.891580] input: Logitech USB Receiver as /class/input/input3 [ 10.334405] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-00= 00:00:02.1-3.1 [ 10.341080] input: Logitech USB Receiver as /class/input/input4 [ 10.414407] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0= 000:00:02.1-3.1 [ 10.494408] mice: PS/2 mouse device common for all mice [ 13.300230] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 13.300237] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18= (level, low) -> IRQ 18 [ 13.303384] Audigy2 value: Special config. [ 15.787369] i2c /dev entries driver [ 15.934662] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 15.935466] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [ 16.120481] w83627ehf: Found W83627EHG chip at 0x290 [ 17.565704] r8169: eth0: link up [ 17.565710] r8169: eth0: link up [ 18.794858] NET: Registered protocol family 17 --Boundary-00=_LH1/HQBIbZUHZo6 Content-Type: application/octet-stream; name="dmesg_2.6.25-rc8_nonraid_nomsi" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg_2.6.25-rc8_nonraid_nomsi" [ 0.000000] Linux version 2.6.25-rc8 (root@energy) (gcc version 4.2.3 (G= entoo 4.2.3 p1.0)) #2 SMP Fri Apr 11 13:26:53 CEST 2008 [ 0.000000] Command line: pci=3Dnomsi root=3D/dev/sda3 nmi_watchdog=3D0 = console=3Dtty6=89 [ 0.000000] H=89=B0=A8=01 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 u= sed [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of = 256 used [ 0.000000] end_pfn_map =3D 1245184 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT = 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT = 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL = 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT = 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT = 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT = 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT = 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD = 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 u= sed [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of = 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE [ 0.000000] early res: 2 [200000-54e213] TEXT DATA BSS [ 0.000000] early res: 3 [9fc00-a0bff] EBDA [ 0.000000] early res: 4 [8000-dfff] PGTABLE [ 0.000000] No mptable found. [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 = on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 = on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 = on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 = on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 = on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 = on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 = on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 = on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 = on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 = on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 = on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 = on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 = on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 = on node 0 [ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 = on node 0 [ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 = on node 0 [ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 = on node 0 [ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 = on node 0 [ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 = on node 0 [ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 = on node 0 [ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 = on node 0 [ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 = on node 0 [ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 = on node 0 [ 0.000000] [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 = on node 0 [ 0.000000] [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 = on node 0 [ 0.000000] [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 = on node 0 [ 0.000000] [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 = on node 0 [ 0.000000] [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 = on node 0 [ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 = on node 0 [ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 = on node 0 [ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 = on node 0 [ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 = on node 0 [ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 = on node 0 [ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 = on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 856 pages reserved [ 0.000000] DMA zone: 3087 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000= a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000= e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 00000000001= 00000 [ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cff= c0000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cff= f0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d00= 00000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec= 01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef= 00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff3= 80000 [ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 00000001000= 00000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000= :2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 32584 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l pages: 1030519 [ 0.000000] Kernel command line: pci=3Dnomsi root=3D/dev/sda3 nmi_watchd= og=3D0 console=3Dtty6=89 [ 0.000000] H=89=B0=A8=01 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000002] time.c: Detected 3013.888 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty6] enabled [ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 = bytes) [ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 by= tes) [ 0.003333] Checking aperture... [ 0.003333] Node 0: aperture @ c000000 size 32 MB [ 0.003333] Aperture pointing to e820 RAM. Ignoring. [ 0.003333] No AGP bridge found [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ c000000 [ 0.003333] PM: Registered nosave memory: 000000000c000000 - 00000000100= 00000 [ 0.003333] Memory: 4047752k/4980736k available (1994k kernel code, 1451= 36k reserved, 866k data, 192k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=3D12, HWalign=3D64, Order=3D0-1, MinObjects= =3D4, CPUs=3D2, Nodes=3D1 [ 0.003333] hpet clockevent registered [ 0.083330] Calibrating delay using timer specific routine.. 6034.75 Bog= oMIPS (lpj=3D10054001) [ 0.083419] Mount-cache hash table entries: 256 [ 0.083538] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.083578] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.083616] CPU: Physical Processor ID: 0 [ 0.083653] CPU: Processor Core ID: 0 [ 0.083702] ACPI: Core revision 20070126 [ 0.122314] Using local APIC timer interrupts. [ 0.123326] APIC timer calibration result 12557905 [ 0.123327] Detected 12.557 MHz APIC timer. [ 0.123429] Booting processor 1/2 APIC 0x1 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6030.96 Bog= oMIPS (lpj=3D10046336) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.216840] Brought up 2 CPUs [ 0.217286] net_namespace: 296 bytes [ 0.217406] NET: Registered protocol family 16 [ 0.217503] No dock devices found. [ 0.217564] ACPI: bus type pci registered [ 0.217641] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 0.217680] PCI: Not using MMCONFIG. [ 0.217717] PCI: Using configuration type 1 [ 0.220763] ACPI: EC: Look up EC in DSDT [ 0.225384] ACPI: Interpreter enabled [ 0.225421] ACPI: (supports S0 S1 S3 S4 S5) [ 0.225592] ACPI: Using IOAPIC for interrupt routing [ 0.225774] ACPI: Error attaching device data [ 0.225814] ACPI: Error attaching device data [ 0.225855] ACPI: Error attaching device data [ 0.225895] ACPI: Error attaching device data [ 0.232199] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.232713] PCI: Transparent bridge - 0000:00:08.0 [ 0.232964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.233122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.233430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.233496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.233562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.233628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.238112] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.238473] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 0.238833] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disab= led. [ 0.239219] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disab= led. [ 0.239605] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disab= led. [ 0.240130] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.240490] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disab= led. [ 0.240876] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.241235] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.241596] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disab= led. [ 0.241984] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.242344] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disab= led. [ 0.242731] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disab= led. [ 0.243118] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.243496] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disab= led. [ 0.243883] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.244244] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disab= led. [ 0.244657] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disab= led. [ 0.245044] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disab= led. [ 0.245431] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disab= led. [ 0.245758] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.245806] pnp: PnP ACPI init [ 0.245845] ACPI: bus type pnp registered [ 0.248973] pnp: PnP ACPI: found 13 devices [ 0.249010] ACPI: ACPI bus type pnp unregistered [ 0.249114] SCSI subsystem initialized [ 0.249187] libata version 3.00 loaded. [ 0.249225] usbcore: registered new interface driver usbfs [ 0.249276] usbcore: registered new interface driver hub [ 0.249331] usbcore: registered new device driver usb [ 0.249409] PCI: Using ACPI for IRQ routing [ 0.249447] PCI: If a device doesn't work, try "pci=3Drouteirq". If it = helps, post a report [ 0.266649] PCI-DMA: Disabling AGP. [ 0.266649] PCI-DMA: aperture base @ c000000 size 65536 KB [ 0.266649] PCI-DMA: using GART IOMMU. [ 0.266649] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.266649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.266649] hpet0: 3 32-bit timers, 25000000 Hz [ 0.266659] Switched to high resolution mode on CPU 0 [ 0.063372] Switched to high resolution mode on CPU 1 [ 0.280018] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.280018] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.280018] system 00:05: ioport range 0x2000-0x207f has been reserved [ 0.280018] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 0.280018] system 00:05: ioport range 0x2400-0x247f has been reserved [ 0.280018] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 0.280021] system 00:05: ioport range 0x2800-0x287f has been reserved [ 0.280060] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 0.280100] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [ 0.280139] system 00:05: ioport range 0x2c80-0x2cff has been reserved [ 0.280179] system 00:05: iomem range 0x0-0x0 could not be reserved [ 0.280219] system 00:05: iomem range 0xfee01000-0xfeefffff has been res= erved [ 0.280263] system 00:07: iomem range 0xfec00000-0xfec00fff could not be= reserved [ 0.280311] system 00:07: iomem range 0xfee00000-0xfee00fff could not be= reserved [ 0.280362] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.280405] system 00:0b: iomem range 0xe0000000-0xefffffff has been res= erved [ 0.280448] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.280488] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.280528] system 00:0c: iomem range 0xe0000-0xfffff could not be reser= ved [ 0.280571] system 00:0c: iomem range 0x100000-0xcfffffff could not be r= eserved [ 0.280619] system 00:0c: iomem range 0xff380000-0xffffffff could not be= reserved [ 0.281067] PCI: Bridge: 0000:00:08.0 [ 0.281105] IO window: d000-dfff [ 0.281142] MEM window: 0xf9f00000-0xf9ffffff [ 0.281180] PREFETCH window: 0x00000000f0000000-0x00000000f00fffff [ 0.281221] PCI: Bridge: 0000:00:0b.0 [ 0.281258] IO window: c000-cfff [ 0.281294] MEM window: 0xf9e00000-0xf9efffff [ 0.281332] PREFETCH window: disabled. [ 0.281369] PCI: Bridge: 0000:00:0c.0 [ 0.281405] IO window: disabled. [ 0.281442] MEM window: disabled. [ 0.281479] PREFETCH window: disabled. [ 0.281516] PCI: Bridge: 0000:00:0d.0 [ 0.281553] IO window: e000-efff [ 0.281590] MEM window: 0xfa000000-0xfebfffff [ 0.281627] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.281667] PCI: Bridge: 0000:00:0e.0 [ 0.281703] IO window: disabled. [ 0.281740] MEM window: disabled. [ 0.281776] PREFETCH window: disabled. [ 0.281819] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.281828] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.281833] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.281838] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.281843] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.281850] NET: Registered protocol family 2 [ 0.316683] IP route cache hash table entries: 131072 (order: 8, 1048576= bytes) [ 0.316683] TCP established hash table entries: 262144 (order: 10, 41943= 04 bytes) [ 0.316683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.316683] TCP: Hash tables configured (established 262144 bind 65536) [ 0.316683] TCP reno registered [ 0.326987] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma= jor 254) [ 0.326987] io scheduler noop registered [ 0.326987] io scheduler cfq registered (default) [ 0.326987] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.326987] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.326987] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.326987] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.326987] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.326987] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.326987] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.326987] pci 0000:04:00.0: Boot video device [ 0.326995] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.326995] assign_interrupt_mode Found MSI capability [ 0.326995] Allocate Port Service[0000:00:0b.0:pcie00] [ 0.327002] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.327002] assign_interrupt_mode Found MSI capability [ 0.327002] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.327009] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.327009] assign_interrupt_mode Found MSI capability [ 0.327009] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.327015] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.327015] assign_interrupt_mode Found MSI capability [ 0.327015] Allocate Port Service[0000:00:0e.0:pcie00] [ 0.327056] input: Power Button (FF) as /class/input/input0 [ 0.327056] ACPI: Power Button (FF) [PWRF] [ 0.327062] input: Power Button (CM) as /class/input/input1 [ 0.327062] ACPI: Power Button (CM) [PWRB] [ 0.327095] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.327102] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.360473] Real Time Clock Driver v1.12ac [ 0.360477] hpet_resources: 0xfed00000 is busy [ 0.360484] Linux agpgart interface v0.103 [ 0.360504] Driver 'sd' needs updating - please use bus_type methods [ 0.360516] ahci 0000:00:0a.0: version 3.0 [ 0.360516] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.360516] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23= (level, low) -> IRQ 23 [ 1.363851] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x= f impl IDE mode [ 1.363851] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio=20 [ 1.363851] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.363851] scsi0 : ahci [ 1.363861] scsi1 : ahci [ 1.363870] scsi2 : ahci [ 1.363879] scsi3 : ahci [ 1.363886] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc10= 0 irq 23 [ 1.363886] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc18= 0 irq 23 [ 1.363886] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc20= 0 irq 23 [ 1.363886] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc28= 0 irq 23 [ 1.801876] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.802364] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 1.802364] ata1.00: 312581808 sectors, multi 16: LBA48=20 [ 1.802910] ata1.00: configured for UDMA/133 [ 2.434825] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.436701] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 2.436701] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.438610] ata2.00: configured for UDMA/133 [ 2.757807] ata3: SATA link down (SStatus 0 SControl 300) [ 3.077671] ata4: SATA link down (SStatus 0 SControl 300) [ 3.273875] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10= =2E0 PQ: 0 ANSI: 5 [ 3.273887] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2 MB) [ 3.273887] sd 0:0:0:0: [sda] Write Protect is off [ 3.273887] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.273887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.273887] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2 MB) [ 3.273887] sd 0:0:0:0: [sda] Write Protect is off [ 3.273887] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.273887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.273887] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.111378] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.111389] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.111394] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR= 10 PQ: 0 ANSI: 5 [ 3.111405] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8 MB) [ 3.111405] sd 1:0:0:0: [sdb] Write Protect is off [ 3.111405] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.111405] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.111405] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8 MB) [ 3.111405] sd 1:0:0:0: [sdb] Write Protect is off [ 3.111405] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.111405] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 3.111405] sdb: sdb1 sdb2 [ 3.139178] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.139188] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.139195] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x6= 4 irq 1,12 [ 3.140372] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.140413] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.169221] usbcore: registered new interface driver usbhid [ 3.169221] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.169221] TCP cubic registered [ 3.169221] NET: Registered protocol family 1 [ 3.169226] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processo= r 6000+ processors (2 cpu cores) (version 2.20.00) [ 3.364071] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 3.364071] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 3.364071] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 3.364071] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 3.364071] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 3.364071] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 3.364071] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 3.364071] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 3.201064] input: AT Translated Set 2 keyboard as /class/input/input2 [ 3.299015] ReiserFS: sda3: found reiserfs format "3.6" with standard jo= urnal [ 3.299058] ReiserFS: sda3: using ordered data mode [ 3.310078] ReiserFS: sda3: journal params: device sda3, size 8192, jour= nal first block 18, max trans len 1024, max batch 900, max commit age 30, m= ax trans age 30 [ 3.310078] ReiserFS: sda3: checking transaction log (sda3) [ 3.355742] ReiserFS: sda3: Using r5 hash to sort names [ 3.355742] VFS: Mounted root (reiserfs filesystem) readonly. [ 3.355742] Freeing unused kernel memory: 192k freed [ 3.976100] Clocksource tsc unstable (delta =3D -130871149 ns) [ 8.496405] ReiserFS: sda3: switching to journaled data mode [ 8.839097] r8169 Gigabit Ethernet driver 2.2LK loaded [ 8.839331] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 8.839337] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19= (level, low) -> IRQ 19 [ 8.839345] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 8.839354] r8169 0000:01:00.0: no MSI. Back to INTx. [ 8.850442] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:c= b, XID 38000000 IRQ 19 [ 8.859539] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 8.859545] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22= (level, low) -> IRQ 22 [ 8.859552] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 8.859554] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 8.859618] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus = number 1 [ 8.859640] ehci_hcd 0000:00:02.1: debug port 1 [ 8.859642] PCI: cache line size of 64 is not supported by device 0000:0= 0:02.1 [ 8.859649] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [ 8.872727] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10= Dec 2004 [ 8.872727] usb usb1: configuration #1 chosen from 1 choice [ 8.872727] hub 1-0:1.0: USB hub found [ 8.872727] hub 1-0:1.0: 10 ports detected [ 9.224776] usb 1-3: new high speed USB device using ehci_hcd and addres= s 2 [ 9.370997] usb 1-3: configuration #1 chosen from 1 choice [ 9.360611] hub 1-3:1.0: USB hub found [ 9.360611] hub 1-3:1.0: 4 ports detected [ 9.510544] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 ac= ross:1951888k [ 9.708976] usb 1-3.1: new low speed USB device using ehci_hcd and addre= ss 3 [ 9.801972] usb 1-3.1: configuration #1 chosen from 1 choice [ 9.819151] input: Logitech USB Receiver as /class/input/input3 [ 10.181957] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-00= 00:00:02.1-3.1 [ 10.188650] input: Logitech USB Receiver as /class/input/input4 [ 10.259567] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0= 000:00:02.1-3.1 [ 10.298635] mice: PS/2 mouse device common for all mice [ 13.140500] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 13.140507] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18= (level, low) -> IRQ 18 [ 13.143610] Audigy2 value: Special config. [ 15.435107] i2c /dev entries driver [ 15.616006] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 15.616031] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [ 15.785507] w83627ehf: Found W83627EHG chip at 0x290 [ 17.141652] r8169: eth0: link up [ 17.272710] r8169: eth0: link up [ 18.511795] NET: Registered protocol family 17 --Boundary-00=_LH1/HQBIbZUHZo6--