From: Greg Ungerer <gerg@snapgear.com>
To: torvalds@linux-foundation.org
Cc: akpm@linux-foundation.org, gerg@uclinux.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] m68knommu: fix ColdFire 5272 fec driver hash registers
Date: Thu, 1 May 2008 13:35:34 +1000 [thread overview]
Message-ID: <200805010335.m413ZYTk004618@goober> (raw)
Renamed the 5272 hash_table registers to match the "grp" hash_table
registers of the other ColdFire parts. They are actually a group hash.
The makes for consistent setup across all ColdFire parts.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
diff -Naurp linux-2.6.25/drivers/net/fec.h linux-2.6.25-uc0/drivers/net/fec.h
--- linux-2.6.25/drivers/net/fec.h 2008-04-17 12:49:44.000000000 +1000
+++ linux-2.6.25-uc0/drivers/net/fec.h 2008-02-05 17:23:17.000000000 +1000
@@ -88,8 +88,8 @@ typedef struct fec {
unsigned long fec_reserved7[158];
unsigned long fec_addr_low; /* Low 32bits MAC address */
unsigned long fec_addr_high; /* High 16bits MAC address */
- unsigned long fec_hash_table_high; /* High 32bits hash table */
- unsigned long fec_hash_table_low; /* Low 32bits hash table */
+ unsigned long fec_grp_hash_table_high;/* High 32bits hash table */
+ unsigned long fec_grp_hash_table_low; /* Low 32bits hash table */
unsigned long fec_r_des_start; /* Receive descriptor ring */
unsigned long fec_x_des_start; /* Transmit descriptor ring */
unsigned long fec_r_buff_size; /* Maximum receive buff size */
diff -Naurp linux-2.6.25/drivers/net/fec.c linux-2.6.25-uc0/drivers/net/fec.c
--- linux-2.6.25/drivers/net/fec.c 2008-04-17 12:49:44.000000000 +1000
+++ linux-2.6.25-uc0/drivers/net/fec.c 2008-05-01 13:30:39.000000000 +1000
@@ -2243,13 +2243,13 @@ static void set_multicast_list(struct ne
/* Catch all multicast addresses, so set the
* filter to all 1's.
*/
- ep->fec_hash_table_high = 0xffffffff;
- ep->fec_hash_table_low = 0xffffffff;
+ ep->fec_grp_hash_table_high = 0xffffffff;
+ ep->fec_grp_hash_table_low = 0xffffffff;
} else {
/* Clear filter and add the addresses in hash register.
*/
- ep->fec_hash_table_high = 0;
- ep->fec_hash_table_low = 0;
+ ep->fec_grp_hash_table_high = 0;
+ ep->fec_grp_hash_table_low = 0;
dmi = dev->mc_list;
@@ -2280,9 +2280,9 @@ static void set_multicast_list(struct ne
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
if (hash > 31)
- ep->fec_hash_table_high |= 1 << (hash - 32);
+ ep->fec_grp_hash_table_high |= 1 << (hash - 32);
else
- ep->fec_hash_table_low |= 1 << hash;
+ ep->fec_grp_hash_table_low |= 1 << hash;
}
}
}
@@ -2430,11 +2430,15 @@ int __init fec_enet_init(struct net_devi
*/
fec_request_intrs(dev);
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
fecp->fec_ecntrl = 2;
fecp->fec_r_des_active = 0;
+#ifndef CONFIG_M5272
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+#endif
dev->base_addr = (unsigned long)fecp;
@@ -2500,8 +2504,8 @@ fec_restart(struct net_device *dev, int
/* Reset all multicast.
*/
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
/* Set maximum receive buffer size.
*/
reply other threads:[~2008-05-01 3:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805010335.m413ZYTk004618@goober \
--to=gerg@snapgear.com \
--cc=akpm@linux-foundation.org \
--cc=gerg@uclinux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®