From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934075AbYEBP0s (ORCPT ); Fri, 2 May 2008 11:26:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S934613AbYEBP0f (ORCPT ); Fri, 2 May 2008 11:26:35 -0400 Received: from vms040pub.verizon.net ([206.46.252.40]:35196 "EHLO vms040pub.verizon.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934605AbYEBP0e convert rfc822-to-8bit (ORCPT ); Fri, 2 May 2008 11:26:34 -0400 Date: Fri, 02 May 2008 11:26:15 -0400 From: Gene Heskett Subject: 2.6.25.1, stray noise in dmesg To: LKML Message-id: <200805021126.15225.gene.heskett@gmail.com> Organization: Organization? very little MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 8BIT Content-disposition: inline User-Agent: KMail/1.9.9 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Greetings; I just rebooted to 2.6.25.1, and was momentarily panic'd by the messages going by early in the boot, but on putting 2&2 together, found they were just noise. >>From dmesg: [root@coyote ~]# dmesg|grep unable [ 2.093502] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.248475] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 2.454444] hub 1-0:1.0: unable to enumerate USB device on port 6 And lsusb: [root@coyote ~]# lsusb Bus 001 Device 011: ID 04b8:010f Seiko Epson Corp. Perfection 1250 Bus 001 Device 010: ID 046d:c510 Logitech, Inc. Bus 001 Device 009: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 001 Device 008: ID 0409:0059 NEC Corp. HighSpeed Hub Bus 001 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 001 Device 006: ID 050d:0751 Belkin Components Bus 001 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub Bus 001 Device 001: ID 1d6b:0002 Bus 003 Device 002: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 003 Device 001: ID 1d6b:0001 Bus 002 Device 003: ID 06a3:8021 Saitek PLC Eclipse II Keyboard Bus 002 Device 002: ID 04b8:0005 Seiko Epson Corp. Stylus Printer Bus 002 Device 001: ID 1d6b:0001 Indicating 3 empty ports, which is not correct either, but everything that is plugged in is accounted for. However, if there is no device there, is it supposed to tell us? In which case it should do that 2-3 more times in dmesg. I realize this is picking minor nits. :) Thanks. -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Shick's Law: There is no problem a good miracle can't solve.