Hi, link where i downloaded the driver: http://www.lsi.com/storage_home/products_home/internal_raid/megaraid_sas/megaraid_sas_8204elp/index.html?locale=EN&remote=1 i downloaded the 09.32_RedHat5.zip , there are, next to the binaries, also an open_source directory, where you can compile the driver. however, this driver doesn't work on recent kernels. I made a patch to let it work on 2.6.21 (it may not be clean). there is a CPU soft lockup warning at boot time, when the module is used, (but that was there even on RH5 with the old kernel and binary driver. so, i doubt it was my doing.) In the megaraid_sata (i've looked at it), there's 2 versions: xscale and ppc or something; which should i use? and lastly: mpt fusion? that sounds like a totally different driver, any reason as why to use that one? We have 2 identical machines to be used as xen hosts, which both have the same card. the first one is already in production, since we saw the iowait problem much later, the second one is empty for now, and i keep it that way for now, so i can test out on it. Of course, time is ticking away, since there are virtual machines being sold :-/ . You know how management works... Sincerely, Maarten Vanraes PS: i just saw that there is a newer driver, but i suspect the source didn't change, it's probably a recompile for the new RH5 kernel. However, i'll see if there are any diff in it, and if so, i'll test it out this week. Op maandag 26 mei 2008 19:11, schreef Jeff Garzik: > Maarten Vanraes wrote: > > Hello, (can you CC me? i'm not on the list) > > > > I have a LSI MegaRAID SAS 8204ELP card, and since it wasn't recognized by > > any driver, i tried using the megasr driver supplied by LSI (it also > > supplies open_source code with it), i had to modify the code a bit to get > > it to boot with kernel-2.6.21 . but there's a very high iowait on it. i'm > > wondering if the megaraid_sas driver is meant to be the driver for the > > same hardware as megasr? would it help if i just added another PCI ID to > > the module and try that one? > > > > Sincerely, > > > > Maarten Vanraes > > > > [] # lspci -s 08:00.0 -vvvn > > 08:00.0 0100: 1000:0059 (rev 08) > > Subsystem: 1000:3002 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr+ Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > > SERR+ > Latency: 0, Cache Line Size: 32 bytes > > Interrupt: pin A routed to IRQ 18 > > Region 0: I/O ports at 3000 [size=256] > > Region 1: Memory at d8410000 (64-bit, non-prefetchable) > > [size=16K] Region 3: Memory at d8400000 (64-bit, non-prefetchable) > > [size=64K] [virtual] Expansion ROM at d8000000 [disabled] [size=2M] > > Capabilities: [50] Power Management version 2 > > Capabilities: [68] Express (v1) Endpoint, MSI 00 > > Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ > > Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1 > > Capabilities: [100] Advanced Error Reporting > > Yeah you can try drivers/scsi/megaraid/megaraid_sas.c or > drivers/message/fusion/mptsas.c. > > A URL to the megasr driver would be nice. > > Also, please keep linux-scsi in CC (I added it), that's where this sort > of things is usually discussed. > > Jeff -- Maarten Vanraes BA NV: IT & Security