mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: clean up reserve_bootmem_generic
Date: Fri, 13 Jun 2008 02:00:56 -0700	[thread overview]
Message-ID: <200806130200.56822.yhlu.kernel@gmail.com> (raw)


1. add reserve_bootmem_generic for 32bit
2. change len to unsigned long
3. make early_res_to_bootmem to use it

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

Index: linux-2.6/arch/x86/kernel/e820.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/e820.c
+++ linux-2.6/arch/x86/kernel/e820.c
@@ -635,7 +635,7 @@ void __init early_res_to_bootmem(u64 sta
 			continue;
 		printk(KERN_INFO "  early res: %d [%llx-%llx] %s\n", i,
 			final_start, final_end - 1, r->name);
-		reserve_bootmem(final_start, final_end - final_start,
+		reserve_bootmem_generic(final_start, final_end - final_start,
 				BOOTMEM_DEFAULT);
 	}
 }
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -859,10 +859,11 @@ static int __init smp_scan_config(unsign
 
 			if (!reserve)
 				return 1;
-#ifdef CONFIG_X86_32
-			reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
+			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE,
 					BOOTMEM_DEFAULT);
 			if (mpf->mpf_physptr) {
+				unsigned long size = PAGE_SIZE;
+#ifdef CONFIG_X86_32
 				/*
 				 * We cannot access to MPC table to compute
 				 * table size yet, as only few megabytes from
@@ -872,22 +873,15 @@ static int __init smp_scan_config(unsign
 				 * PAGE_SIZE from mpg->mpf_physptr yields BUG()
 				 * in reserve_bootmem.
 				 */
-				unsigned long size = PAGE_SIZE;
 				unsigned long end = max_low_pfn * PAGE_SIZE;
 				if (mpf->mpf_physptr + size > end)
 					size = end - mpf->mpf_physptr;
-				reserve_bootmem(mpf->mpf_physptr, size,
+#endif
+				reserve_bootmem_generic(mpf->mpf_physptr, size,
 						BOOTMEM_DEFAULT);
 			}
 
-#else
-			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE,
-				BOOTMEM_DEFAULT);
-			if (mpf->mpf_physptr)
-				reserve_bootmem_generic(mpf->mpf_physptr,
-					PAGE_SIZE, BOOTMEM_DEFAULT);
-#endif
-		return 1;
+			return 1;
 		}
 		bp += 4;
 		length -= 16;
Index: linux-2.6/arch/x86/mm/init_32.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_32.c
+++ linux-2.6/arch/x86/mm/init_32.c
@@ -781,3 +781,9 @@ void free_initrd_mem(unsigned long start
 	free_init_pages("initrd memory", start, end);
 }
 #endif
+
+int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
+				   int flags)
+{
+	return reserve_bootmem(phys, len, flags);
+}
Index: linux-2.6/arch/x86/mm/init_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_64.c
+++ linux-2.6/arch/x86/mm/init_64.c
@@ -827,7 +827,8 @@ void free_initrd_mem(unsigned long start
 }
 #endif
 
-int __init reserve_bootmem_generic(unsigned long phys, unsigned len, int flags)
+int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
+				   int flags)
 {
 #ifdef CONFIG_NUMA
 	int nid, next_nid;
Index: linux-2.6/include/asm-x86/proto.h
===================================================================
--- linux-2.6.orig/include/asm-x86/proto.h
+++ linux-2.6/include/asm-x86/proto.h
@@ -14,8 +14,6 @@ extern void ia32_syscall(void);
 extern void ia32_cstar_target(void);
 extern void ia32_sysenter_target(void);
 
-extern int reserve_bootmem_generic(unsigned long phys, unsigned len, int flags);
-
 extern void syscall32_cpu_init(void);
 
 extern void check_efer(void);
Index: linux-2.6/include/linux/bootmem.h
===================================================================
--- linux-2.6.orig/include/linux/bootmem.h
+++ linux-2.6/include/linux/bootmem.h
@@ -84,6 +84,8 @@ extern int reserve_bootmem(unsigned long
 	__alloc_bootmem_low(x, PAGE_SIZE, 0)
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
+extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
+				   int flags);
 extern unsigned long free_all_bootmem(void);
 extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
 extern void *__alloc_bootmem_node(pg_data_t *pgdat,

             reply	other threads:[~2008-06-13  9:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-13  9:00 Yinghai Lu [this message]
2008-06-13 11:22 ` Ingo Molnar
2008-06-13 18:02   ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200806130200.56822.yhlu.kernel@gmail.com \
    --to=yhlu.kernel@gmail.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®