From: Randy Dunlap <randy.dunlap@oracle.com>
To: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: Re: [Bug 10872] x86_64 boot hang when CONFIG_NUMA=n
Date: Sun, 15 Jun 2008 18:11:01 -0700 [thread overview]
Message-ID: <20080615181101.bcbab2ef.randy.dunlap@oracle.com> (raw)
In-Reply-To: <86802c440806151218h7b8b6c80q4ce0f6505244e588@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1995 bytes --]
On Sun, 15 Jun 2008 12:18:42 -0700 Yinghai Lu wrote:
> On Sun, Jun 15, 2008 at 9:35 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> > On Sat, 14 Jun 2008 22:12:04 +0200 (CEST) Rafael J. Wysocki wrote:
> >
> >> This message has been generated automatically as a part of a report
> >> of recent regressions.
> >>
> >> The following bug entry is on the current list of known regressions
> >> from 2.6.25. Please verify if it still should be listed.
> >>
> >>
> >> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10872
> >> Subject : x86_64 boot hang when CONFIG_NUMA=n
> >> Submitter : Randy Dunlap <randy.dunlap@oracle.com>
> >> Date : 2008-06-05 21:50 (10 days old)
> >> References : http://marc.info/?l=linux-kernel&m=121270308607116&w=4
> >> http://lkml.org/lkml/2008/6/11/355
> >> Handled-By : Yinghai Lu <yhlu.kernel@gmail.com>
> >
> > Yes, still happens for me on 2.6.26-rc6-git2.
> >
>
> please send out whole boot log with numa on and numa off
> and boot with debug
>
> please apply attached debug patch too.
OK, did all of that.
I should probably note that in both cases, the kernel is loaded/booted by using kexec.
Both boot logs are captured generated via netconsole.
The failing boot log is netcon-4409.log. The working boot log (CONFIG_NUMA=y) is
netcon-4410.log. Enabling CONFIG_NUMA makes the following changes:
4c4
< # Sun Jun 15 15:00:56 2008
---
> # Sun Jun 15 15:10:15 2008
241c241,246
< # CONFIG_NUMA is not set
---
> CONFIG_NUMA=y
> CONFIG_K8_NUMA=y
> CONFIG_X86_64_ACPI_NUMA=y
> CONFIG_NODES_SPAN_OTHER_NODES=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_NODES_SHIFT=6
249a255
> CONFIG_NEED_MULTIPLE_NODES=y
260a267
> CONFIG_MIGRATION=y
282a290
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
309a318
> CONFIG_ACPI_NUMA=y
Thanks,
---
~Randy
'"Daemon' is an old piece of jargon from the UNIX operating system,
where it referred to a piece of low-level utility software, a
fundamental part of the operating system."
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: netcon-4409.log --]
[-- Type: text/x-log; name="netcon-4409.log", Size: 11585 bytes --]
Linux version 2.6.26-rc6-git2 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Sun Jun 15 15:03:33 PDT 2008
Command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54409@139.185.50.77/eth0,54409@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000100 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000027ffff000 (usable)
debug: ignoring loglevel setting.
Entering add_active_range(0, 1, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 523856) 1 entries of 256 used
Entering add_active_range(0, 1048576, 2621439) 2 entries of 256 used
max_pfn_mapped = 2621439
init_memory_mapping
DMI 2.3 present.
ACPI: RSDP 000F4F00, 0024 (r2 HP )
ACPI: XSDT 7FE50780, 005C (r1 HP A08 2 Ò\x04 162E)
ACPI: FACP 7FE50800, 00F4 (r3 HP A08 2 Ò\x04 162E)
ACPI: DSDT 7FE50900, 3F75 (r1 HP DSDT 1 INTL 20030228)
ACPI: FACS 7FE50100, 0040
ACPI: SPCR 7FE50140, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E)
ACPI: MCFG 7FE501C0, 003C (r1 HP ProLiant 1 0)
ACPI: HPET 7FE50200, 0038 (r1 HP A08 2 Ò\x04 162E)
ACPI: SPMI 7FE50240, 0040 (r5 HP ProLiant 1 Ò\x04 162E)
ACPI: APIC 7FE50280, 00DE (r1 HP 00000083 2 0)
ACPI: SRAT 7FE50380, 0110 (r1 AMD HAMMER 1 AMD 1)
Entering add_active_range(0, 1, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 523856) 1 entries of 256 used
Entering add_active_range(0, 1048576, 2621439) 2 entries of 256 used
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] TRAMPOLINE
early res: 2 [200000-81a6af] TEXT DATA BSS
early res: 3 [7fd05000-7fe4f6a0] RAMDISK
early res: 4 [9f400-fffff] BIOS reserved
early res: 5 [8000-11fff] PGTABLE
[ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[ffffe20002e00000-ffffe20008bfffff] PMD -> [ffff81000c000000-ffff810011dfffff] on node 0
Zone PFN ranges:
DMA 1 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2621439
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 1 -> 159
0: 256 -> 523856
0: 1048576 -> 2621439
On node 0 totalpages: 2096621
DMA zone: 56 pages used for memmap
DMA zone: 1673 pages reserved
DMA zone: 2269 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505480 pages, LIFO batch:31
Normal zone: 21504 pages used for memmap
Normal zone: 1551359 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38])
IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10228201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000
PM: Registered nosave memory: 000000007fe58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 36016 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059108
Kernel command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54409@139.185.50.77/eth0,54409@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1004.630 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
Node 0: aperture @ c000000 size 64 MB
Aperture pointing to e820 RAM. Ignoring.
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
PM: Registered nosave memory: 0000000004000000 - 0000000008000000
Memory: 8156604k/10485756k available (3336k kernel code, 229320k reserved, 1652k data, 264k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 2010.77 BogoMIPS (lpj=4021542)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20080321
CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Using local APIC timer interrupts.
APIC timer calibration result 12557913
Detected 12.557 MHz APIC timer.
Booting processor 1/2 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2009.34 BogoMIPS (lpj=4018683)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 2/1 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 2009.42 BogoMIPS (lpj=4018844)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 3/3 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 2009.33 BogoMIPS (lpj=4018673)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (8038.87 BogoMIPS).
khelper used greatest stack depth: 6136 bytes left
calling init_cpufreq_transition_notifier_list+0x0/0x1b
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs
calling net_ns_init+0x0/0x15d
net_namespace: 368 bytes
initcall net_ns_init+0x0/0x15d returned 0 after 0 msecs
calling cpufreq_tsc+0x0/0x16
initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
calling init_smp_flush+0x0/0x49
initcall init_smp_flush+0x0/0x49 returned 0 after 0 msecs
calling sysctl_init+0x0/0x32
initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs
calling ksysfs_init+0x0/0xbb
initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs
calling init_jiffies_clocksource+0x0/0x12
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs
calling pm_init+0x0/0x34
initcall pm_init+0x0/0x34 returned 0 after 0 msecs
calling pm_disk_init+0x0/0x19
initcall pm_disk_init+0x0/0x19 returned 0 after 0 msecs
calling swsusp_header_init+0x0/0x2c
initcall swsusp_header_init+0x0/0x2c returned 0 after 0 msecs
calling filelock_init+0x0/0x2e
initcall filelock_init+0x0/0x2e returned 0 after 0 msecs
calling init_misc_binfmt+0x0/0x3f
initcall init_misc_binfmt+0x0/0x3f returned 0 after 0 msecs
calling init_script_binfmt+0x0/0x12
initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs
calling init_elf_binfmt+0x0/0x12
initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs
calling init_compat_elf_binfmt+0x0/0x12
initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs
calling debugfs_init+0x0/0x51
initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs
calling random32_init+0x0/0x58
initcall random32_init+0x0/0x58 returned 0 after 0 msecs
calling cpufreq_core_init+0x0/0x75
initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 msecs
calling cpuidle_init+0x0/0x40
initcall cpuidle_init+0x0/0x40 returned 0 after 0 msecs
calling sock_init+0x0/0x59
initcall sock_init+0x0/0x59 returned 0 after 0 msecs
calling netpoll_init+0x0/0x31
initcall netpoll_init+0x0/0x31 returned 0 after 0 msecs
calling netlink_proto_init+0x0/0x14d
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14d returned 0 after 0 msecs
calling bdi_class_init+0x0/0x3d
initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs
calling kobject_uevent_init+0x0/0x45
initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs
calling pcibus_class_init+0x0/0x12
initcall pcibus_class_init+0x0/0x12 returned 0 after 0 msecs
calling pci_driver_init+0x0/0x12
initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs
calling backlight_class_init+0x0/0x49
initcall backlight_class_init+0x0/0x49 returned 0 after 0 msecs
calling tty_class_init+0x0/0x2a
initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs
calling vtconsole_class_init+0x0/0xba
initcall vtconsole_class_init+0x0/0xba returned 0 after 0 msecs
calling early_fill_mp_bus_info+0x0/0x7b2
node 0 link 1: io port [1000, 3fff]
node 1 link 2: io port [4000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [e8000000, fddfffff]
node 1 link 2: mmio [fde00000, fdffffff]
node 0 link 1: mmio [80000000, 83ffffff]
node 1 link 2: mmio [84000000, 8fffffff]
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000280000000 aka 10240M
bus: [00,3f] on node 0 link 1
bus: 00 index 0 io port: [0, 3fff]
bus: 00 index 1 mmio: [90000000, fddfffff]
bus: 00 index 2 mmio: [80000000, 83ffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [fe000000, ffffffff]
bus: 00 index 5 mmio: [280000000, fcffffffff]
bus: [40,ff] on node 1 link 2
bus: 40 index 0 io port: [4000, ffff]
bus: 40 index 1 mmio: [fde00000, fdffffff]
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: netcon-4410.log --]
[-- Type: text/x-log; name="netcon-4410.log", Size: 67267 bytes --]
Linux version 2.6.26-rc6-git2 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Sun Jun 15 15:12:52 PDT 2008
Command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54410@139.185.50.77/eth0,54410@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000100 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000027ffff000 (usable)
debug: ignoring loglevel setting.
Entering add_active_range(0, 1, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 523856) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2621439) 2 entries of 3200 used
max_pfn_mapped = 2621439
init_memory_mapping
DMI 2.3 present.
ACPI: RSDP 000F4F00, 0024 (r2 HP )
ACPI: XSDT 7FE50780, 005C (r1 HP A08 2 Ò\x04 162E)
ACPI: FACP 7FE50800, 00F4 (r3 HP A08 2 Ò\x04 162E)
ACPI: DSDT 7FE50900, 3F75 (r1 HP DSDT 1 INTL 20030228)
ACPI: FACS 7FE50100, 0040
ACPI: SPCR 7FE50140, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E)
ACPI: MCFG 7FE501C0, 003C (r1 HP ProLiant 1 0)
ACPI: HPET 7FE50200, 0038 (r1 HP A08 2 Ò\x04 162E)
ACPI: SPMI 7FE50240, 0040 (r5 HP ProLiant 1 Ò\x04 162E)
ACPI: APIC 7FE50280, 00DE (r1 HP 00000083 2 0)
ACPI: SRAT 7FE50380, 0110 (r1 AMD HAMMER 1 AMD 1)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 1, 159) 0 entries of 3200 used
SRAT: Node 0 PXM 0 100000-80000000
Entering add_active_range(0, 256, 523856) 1 entries of 3200 used
SRAT: Node 0 PXM 0 100000000-180000000
Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used
SRAT: Node 1 PXM 1 180000000-280000000
Entering add_active_range(1, 1572864, 2621439) 3 entries of 3200 used
NUMA: Allocated memnodemap from 12000 - 17080
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000180000000
NODE_DATA [0000000000001000 - 0000000000004fff]
bootmap [0000000000018000 - 0000000000047fff] pages 30
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] TRAMPOLINE
early res: 2 [200000-84a3af] TEXT DATA BSS
early res: 3 [7fd05000-7fe4f6b0] RAMDISK
early res: 4 [9f400-fffff] BIOS reserved
early res: 5 [8000-11fff] PGTABLE
early res: 6 [12000-1707f] MEMNODEMAP
Bootmem setup node 1 0000000180000000-000000027ffff000
NODE_DATA [0000000180000000 - 0000000180003fff]
bootmap [0000000180004000 - 0000000180023fff] pages 20
[ffffe20000000000-ffffe200049fffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[ffffe20004a00000-ffffe200053fffff] PMD -> [ffff81000c000000-ffff81000c9fffff] on node 0
[ffffe20005400000-ffffe20008bfffff] PMD -> [ffff810180200000-ffff8101839fffff] on node 1
Zone PFN ranges:
DMA 1 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2621439
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 1 -> 159
0: 256 -> 523856
0: 1048576 -> 1572864
1: 1572864 -> 2621439
On node 0 totalpages: 1048046
DMA zone: 56 pages used for memmap
DMA zone: 1726 pages reserved
DMA zone: 2216 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505480 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 517120 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
On node 1 totalpages: 1048575
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034239 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38])
IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10228201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000
PM: Registered nosave memory: 000000007fe58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 36528 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 4
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2059055
Policy zone: Normal
Kernel command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54410@139.185.50.77/eth0,54410@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1004.629 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ c000000 size 64 MB
Aperture pointing to e820 RAM. Ignoring.
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
PM: Registered nosave memory: 0000000004000000 - 0000000008000000
Memory: 8197832k/10485756k available (3370k kernel code, 188652k reserved, 1711k data, 344k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
hpet clockevent registered
Calibrating delay using timer specific routine.. 2010.73 BogoMIPS (lpj=4021462)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20080321
CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Using local APIC timer interrupts.
APIC timer calibration result 12557859
Detected 12.557 MHz APIC timer.
Booting processor 1/2 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2009.34 BogoMIPS (lpj=4018698)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 2/1 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 2009.42 BogoMIPS (lpj=4018853)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 3/3 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 2009.33 BogoMIPS (lpj=4018667)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (8038.84 BogoMIPS).
khelper used greatest stack depth: 5976 bytes left
calling init_cpufreq_transition_notifier_list+0x0/0x1b
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs
calling net_ns_init+0x0/0x15d
net_namespace: 368 bytes
initcall net_ns_init+0x0/0x15d returned 0 after 3 msecs
calling cpufreq_tsc+0x0/0x16
initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
calling init_smp_flush+0x0/0x49
initcall init_smp_flush+0x0/0x49 returned 0 after 0 msecs
calling sysctl_init+0x0/0x32
initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs
calling ksysfs_init+0x0/0xbb
initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs
calling init_jiffies_clocksource+0x0/0x12
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs
calling pm_init+0x0/0x34
initcall pm_init+0x0/0x34 returned 0 after 0 msecs
calling pm_disk_init+0x0/0x19
initcall pm_disk_init+0x0/0x19 returned 0 after 0 msecs
calling swsusp_header_init+0x0/0x2c
initcall swsusp_header_init+0x0/0x2c returned 0 after 0 msecs
calling filelock_init+0x0/0x2e
initcall filelock_init+0x0/0x2e returned 0 after 0 msecs
calling init_misc_binfmt+0x0/0x3f
initcall init_misc_binfmt+0x0/0x3f returned 0 after 0 msecs
calling init_script_binfmt+0x0/0x12
initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs
calling init_elf_binfmt+0x0/0x12
initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs
calling init_compat_elf_binfmt+0x0/0x12
initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs
calling debugfs_init+0x0/0x51
initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs
calling random32_init+0x0/0x58
initcall random32_init+0x0/0x58 returned 0 after 0 msecs
calling cpufreq_core_init+0x0/0x75
initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 msecs
calling cpuidle_init+0x0/0x40
initcall cpuidle_init+0x0/0x40 returned 0 after 0 msecs
calling sock_init+0x0/0x59
initcall sock_init+0x0/0x59 returned 0 after 0 msecs
calling netpoll_init+0x0/0x31
initcall netpoll_init+0x0/0x31 returned 0 after 0 msecs
calling netlink_proto_init+0x0/0x14d
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14d returned 0 after 0 msecs
calling bdi_class_init+0x0/0x3d
initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs
calling kobject_uevent_init+0x0/0x45
initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs
calling pcibus_class_init+0x0/0x12
initcall pcibus_class_init+0x0/0x12 returned 0 after 0 msecs
calling pci_driver_init+0x0/0x12
initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs
calling backlight_class_init+0x0/0x49
initcall backlight_class_init+0x0/0x49 returned 0 after 0 msecs
calling tty_class_init+0x0/0x2a
initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs
calling vtconsole_class_init+0x0/0xba
initcall vtconsole_class_init+0x0/0xba returned 0 after 0 msecs
calling register_node_type+0x0/0x6b
initcall register_node_type+0x0/0x6b returned 0 after 0 msecs
calling early_fill_mp_bus_info+0x0/0x7ed
node 0 link 1: io port [1000, 3fff]
node 1 link 2: io port [4000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [e8000000, fddfffff]
node 1 link 2: mmio [fde00000, fdffffff]
node 0 link 1: mmio [80000000, 83ffffff]
node 1 link 2: mmio [84000000, 8fffffff]
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000280000000 aka 10240M
bus: [00,3f] on node 0 link 1
bus: 00 index 0 io port: [0, 3fff]
bus: 00 index 1 mmio: [90000000, fddfffff]
bus: 00 index 2 mmio: [80000000, 83ffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [fe000000, ffffffff]
bus: 00 index 5 mmio: [280000000, fcffffffff]
bus: [40,ff] on node 1 link 2
bus: 40 index 0 io port: [4000, ffff]
bus: 40 index 1 mmio: [fde00000, fdffffff]
bus: 40 index 2 mmio: [84000000, 8fffffff]
initcall early_fill_mp_bus_info+0x0/0x7ed returned 0 after 3 msecs
calling arch_kdebugfs_init+0x0/0x8
initcall arch_kdebugfs_init+0x0/0x8 returned 0 after 0 msecs
calling mtrr_if_init+0x0/0x77
initcall mtrr_if_init+0x0/0x77 returned 0 after 0 msecs
calling ffh_cstate_init+0x0/0x31
initcall ffh_cstate_init+0x0/0x31 returned -1 after 0 msecs
initcall ffh_cstate_init+0x0/0x31 returned with error code -1
calling acpi_pci_init+0x0/0x4a
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x4a returned 0 after 0 msecs
calling init_acpi_device_notify+0x0/0x4b
initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs
calling dmi_id_init+0x0/0x2e9
initcall dmi_id_init+0x0/0x2e9 returned 0 after 0 msecs
calling pci_access_init+0x0/0x4e
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort.
initcall pci_access_init+0x0/0x4e returned 0 after 0 msecs
calling topology_init+0x0/0x7c
initcall topology_init+0x0/0x7c returned 0 after 0 msecs
calling mtrr_init_finialize+0x0/0x34
initcall mtrr_init_finialize+0x0/0x34 returned 0 after 0 msecs
calling param_sysfs_init+0x0/0x1e7
initcall param_sysfs_init+0x0/0x1e7 returned 0 after 3 msecs
calling pm_sysrq_init+0x0/0x19
initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 msecs
calling readahead_init+0x0/0x38
initcall readahead_init+0x0/0x38 returned 0 after 0 msecs
calling init_bio+0x0/0xc5
initcall init_bio+0x0/0xc5 returned 0 after 0 msecs
calling blk_settings_init+0x0/0x2a
initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs
calling blk_ioc_init+0x0/0x2a
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs
calling genhd_device_init+0x0/0x40
initcall genhd_device_init+0x0/0x40 returned 0 after 0 msecs
calling fbmem_init+0x0/0x8a
initcall fbmem_init+0x0/0x8a returned 0 after 0 msecs
calling acpi_init+0x0/0x21d
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 7FE58000, 04F0 (r2 HP PNOWSSDT 2 HP 1)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at 80000000 - 8fffffff
initcall acpi_init+0x0/0x21d returned 0 after 30 msecs
calling acpi_scan_init+0x0/0x11e
initcall acpi_scan_init+0x0/0x11e returned 0 after 7 msecs
calling acpi_ec_init+0x0/0x61
initcall acpi_ec_init+0x0/0x61 returned 0 after 0 msecs
calling acpi_pci_root_init+0x0/0x28
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [f7de0000, f7de0fff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [f7dd0000, f7dd00ff]
PCI: 0000:01:03.0 reg 10 32bit mmio: [e8000000, efffffff]
PCI: 0000:01:03.0 reg 14 io port: [1000, 10ff]
PCI: 0000:01:03.0 reg 18 32bit mmio: [f7ff0000, f7ffffff]
PCI: 0000:01:04.0 reg 10 io port: [2800, 28ff]
PCI: 0000:01:04.0 reg 14 32bit mmio: [f7fe0000, f7fe01ff]
PCI: 0000:01:04.2 reg 10 io port: [1400, 14ff]
PCI: 0000:01:04.2 reg 14 32bit mmio: [f7fd0000, f7fd07ff]
PCI: 0000:01:04.2 reg 18 32bit mmio: [f7fc0000, f7fc1fff]
PCI: 0000:01:04.2 reg 1c 32bit mmio: [f7f00000, f7f7ffff]
PCI: 0000:01:04.4 reg 20 io port: [1800, 181f]
PCI: 0000:01:04.6 reg 10 32bit mmio: [f7ef0000, f7ef00ff]
PCI: Transparent bridge - 0000:00:09.0
PCI: bridge 0000:00:09.0 io port: [1000, 2fff]
PCI: bridge 0000:00:09.0 32bit mmio: [f7e00000, f7ffffff]
PCI: bridge 0000:00:09.0 32bit mmio pref: [e8000000, efffffff]
PCI: bridge 0000:00:0b.0 32bit mmio: [f8000000, f9ffffff]
PCI: bridge 0000:00:0b.0 64bit mmio pref: [90000000, 900fffff]
PCI: 0000:03:00.0 reg 10 64bit mmio: [f8000000, f9ffffff]
PCI: bridge 0000:02:00.0 32bit mmio: [f8000000, f9ffffff]
PCI: bridge 0000:02:00.0 64bit mmio pref: [90000000, 900fffff]
PCI: bridge 0000:00:0c.0 32bit mmio: [fa000000, fbffffff]
PCI: bridge 0000:00:0c.0 64bit mmio pref: [90100000, 901fffff]
PCI: 0000:05:00.0 reg 10 64bit mmio: [fa000000, fbffffff]
PCI: bridge 0000:04:00.0 32bit mmio: [fa000000, fbffffff]
PCI: bridge 0000:04:00.0 64bit mmio pref: [90100000, 901fffff]
PCI: bridge 0000:00:0d.0 32bit mmio: [fdc00000, fdcfffff]
PCI: 0000:07:04.0 reg 10 64bit mmio: [fdcf0000, fdcfffff]
PCI: 0000:07:04.0 reg 18 64bit mmio: [fdce0000, fdceffff]
PCI: 0000:07:04.1 reg 10 64bit mmio: [fdcd0000, fdcdffff]
PCI: 0000:07:04.1 reg 18 64bit mmio: [fdcc0000, fdccffff]
PCI: bridge 0000:06:00.0 32bit mmio: [fdc00000, fdcfffff]
PCI: 0000:08:00.0 reg 10 64bit mmio: [fddf0000, fddf0fff]
PCI: 0000:08:00.0 reg 18 64bit mmio: [fdde0000, fdde00ff]
PCI: 0000:08:00.0 reg 20 io port: [3000, 30ff]
PCI: 0000:08:00.1 reg 10 64bit mmio: [fddd0000, fddd0fff]
PCI: 0000:08:00.1 reg 18 64bit mmio: [fddc0000, fddc00ff]
PCI: 0000:08:00.1 reg 20 io port: [3400, 34ff]
PCI: bridge 0000:00:0e.0 io port: [3000, 3fff]
PCI: bridge 0000:00:0e.0 32bit mmio: [fdd00000, fddfffff]
PCI: bridge 0000:00:0e.0 64bit mmio pref: [90200000, 902fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
PCI: 0000:40:01.0 reg 14 32bit mmio: [fdef0000, fdef0fff]
PCI: bridge 0000:40:0c.0 io port: [4000, 4fff]
PCI: bridge 0000:40:0c.0 32bit mmio: [fdf00000, fdffffff]
PCI: bridge 0000:40:0c.0 64bit mmio pref: [90300000, 903fffff]
PCI: 0000:42:08.0 reg 10 64bit mmio: [fdf80000, fdffffff]
PCI: 0000:42:08.0 reg 18 io port: [4000, 40ff]
PCI: 0000:42:08.0 reg 1c 32bit mmio: [fdf70000, fdf77fff]
PCI: bridge 0000:41:00.0 io port: [4000, 4fff]
PCI: bridge 0000:41:00.0 32bit mmio: [fdf00000, fdffffff]
PCI: bridge 0000:41:00.0 64bit mmio pref: [90300000, 903fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT]
initcall acpi_pci_root_init+0x0/0x28 returned 0 after 22 msecs
calling acpi_pci_link_init+0x0/0x48
ACPI: PCI Interrupt Link [LNKW] (IRQs *16)
ACPI: PCI Interrupt Link [LNKX] (IRQs *17)
ACPI: PCI Interrupt Link [LNKY] (IRQs *18)
ACPI: PCI Interrupt Link [LNKZ] (IRQs *19)
ACPI: PCI Interrupt Link [LNU0] (IRQs *22)
ACPI: PCI Interrupt Link [LNU2] (IRQs *23)
ACPI: PCI Interrupt Link [LNKA] (IRQs *54)
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
initcall acpi_pci_link_init+0x0/0x48 returned 0 after 7 msecs
calling acpi_power_init+0x0/0x77
initcall acpi_power_init+0x0/0x77 returned 0 after 0 msecs
calling acpi_system_init+0x0/0x260
initcall acpi_system_init+0x0/0x260 returned 0 after 0 msecs
calling acpi_cm_sbs_init+0x0/0x8
initcall acpi_cm_sbs_init+0x0/0x8 returned 0 after 0 msecs
calling pnp_init+0x0/0x20
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall pnp_init+0x0/0x20 returned 0 after 0 msecs
calling pnpacpi_init+0x0/0x8c
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 7 msecs
calling misc_init+0x0/0x98
initcall misc_init+0x0/0x98 returned 0 after 0 msecs
calling cn_init+0x0/0xcb
initcall cn_init+0x0/0xcb returned 0 after 0 msecs
calling phy_init+0x0/0x31
initcall phy_init+0x0/0x31 returned 0 after 0 msecs
calling init_scsi+0x0/0x91
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 3 msecs
calling usb_init+0x0/0x122
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x122 returned 0 after 0 msecs
calling serio_init+0x0/0x89
initcall serio_init+0x0/0x89 returned 0 after 0 msecs
calling input_init+0x0/0x107
initcall input_init+0x0/0x107 returned 0 after 0 msecs
calling rtc_init+0x0/0x70
initcall rtc_init+0x0/0x70 returned 0 after 0 msecs
calling i2c_init+0x0/0x5f
initcall i2c_init+0x0/0x5f returned 0 after 3 msecs
calling power_supply_class_init+0x0/0x34
initcall power_supply_class_init+0x0/0x34 returned 0 after 0 msecs
calling hwmon_init+0x0/0x3b
initcall hwmon_init+0x0/0x3b returned 0 after 0 msecs
calling thermal_init+0x0/0x51
initcall thermal_init+0x0/0x51 returned 0 after 0 msecs
calling pci_acpi_init+0x0/0x96
PCI: Using ACPI for IRQ routing
initcall pci_acpi_init+0x0/0x96 returned 0 after 0 msecs
calling pci_legacy_init+0x0/0x11d
initcall pci_legacy_init+0x0/0x11d returned 0 after 0 msecs
calling pcibios_irq_init+0x0/0x4b2
initcall pcibios_irq_init+0x0/0x4b2 returned 0 after 0 msecs
calling pcibios_init+0x0/0x74
PCI: Cannot allocate resource region 9 of bridge 0000:40:0c.0
PCI: Cannot allocate resource region 9 of bridge 0000:41:00.0
initcall pcibios_init+0x0/0x74 returned 0 after 0 msecs
calling proto_init+0x0/0x2e
initcall proto_init+0x0/0x2e returned 0 after 0 msecs
calling net_dev_init+0x0/0x153
initcall net_dev_init+0x0/0x153 returned 0 after 0 msecs
calling neigh_init+0x0/0x71
initcall neigh_init+0x0/0x71 returned 0 after 0 msecs
calling fib_rules_init+0x0/0xa6
initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs
calling genl_init+0x0/0xd5
initcall genl_init+0x0/0xd5 returned 0 after 15 msecs
calling sysctl_init+0x0/0x2d
initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs
calling pci_iommu_init+0x0/0x12
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
initcall pci_iommu_init+0x0/0x12 returned 0 after 3 msecs
calling hpet_late_init+0x0/0x10d
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
initcall hpet_late_init+0x0/0x10d returned 0 after 0 msecs
calling clocksource_done_booting+0x0/0x12
initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 msecs
calling init_pipe_fs+0x0/0x4c
initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs
calling init_mnt_writers+0x0/0x4f
initcall init_mnt_writers+0x0/0x4f returned 0 after 0 msecs
calling eventpoll_init+0x0/0x85
initcall eventpoll_init+0x0/0x85 returned 0 after 0 msecs
calling anon_inode_init+0x0/0x115
initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs
calling acpi_rtc_init+0x0/0xe7
initcall acpi_rtc_init+0x0/0xe7 returned 0 after 0 msecs
calling acpi_event_init+0x0/0x80
initcall acpi_event_init+0x0/0x80 returned 0 after 13 msecs
calling pnp_system_init+0x0/0x12
system 00:01: ioport range 0x408-0x40f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x700-0x73f has been reserved
system 00:01: ioport range 0x800-0x8fe has been reserved
system 00:01: ioport range 0x900-0x9fe has been reserved
system 00:01: ioport range 0x9ff-0x9ff has been reserved
system 00:01: ioport range 0xa00-0xafe has been reserved
system 00:01: ioport range 0xaff-0xaff has been reserved
system 00:01: ioport range 0xb00-0xbfe has been reserved
system 00:01: ioport range 0xbff-0xbff has been reserved
system 00:01: ioport range 0xc80-0xc83 has been reserved
system 00:01: ioport range 0xcd4-0xcd7 has been reserved
system 00:01: ioport range 0xf50-0xf58 has been reserved
system 00:01: ioport range 0xca0-0xca1 has been reserved
system 00:01: ioport range 0xca4-0xca5 has been reserved
system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
system 00:01: ioport range 0x3f8-0x3ff has been reserved
system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved
system 00:01: iomem range 0xf7df0000-0xf7df0fff has been reserved
system 00:01: iomem range 0xfdef0000-0xfdef0fff has been reserved
initcall pnp_system_init+0x0/0x12 returned 0 after 3 msecs
calling chr_dev_init+0x0/0x98
initcall chr_dev_init+0x0/0x98 returned 0 after 0 msecs
calling firmware_class_init+0x0/0x72
initcall firmware_class_init+0x0/0x72 returned 0 after 0 msecs
calling loopback_init+0x0/0x12
initcall loopback_init+0x0/0x12 returned 0 after 0 msecs
calling cpufreq_gov_performance_init+0x0/0x12
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 msecs
calling cpufreq_gov_userspace_init+0x0/0x12
initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 msecs
calling init_acpi_pm_clocksource+0x0/0xa4
initcall init_acpi_pm_clocksource+0x0/0xa4 returned 0 after 0 msecs
calling ssb_modinit+0x0/0x4a
initcall ssb_modinit+0x0/0x4a returned 0 after 0 msecs
calling pcibios_assign_resources+0x0/0x87
PCI: Bridge: 0000:00:09.0
IO window: 1000-2fff
MEM window: 0xf7e00000-0xf7ffffff
PREFETCH window: 0x00000000e8000000-0x00000000efffffff
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: 0xf8000000-0xf9ffffff
PREFETCH window: 0x0000000090000000-0x00000000900fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: 0xf8000000-0xf9ffffff
PREFETCH window: 0x0000000090000000-0x00000000900fffff
PCI: Bridge: 0000:04:00.0
IO window: disabled.
MEM window: 0xfa000000-0xfbffffff
PREFETCH window: 0x0000000090100000-0x00000000901fffff
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: 0xfa000000-0xfbffffff
PREFETCH window: 0x0000000090100000-0x00000000901fffff
PCI: Bridge: 0000:06:00.0
IO window: disabled.
MEM window: 0xfdc00000-0xfdcfffff
PREFETCH window: 0x0000000090300000-0x00000000903fffff
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: 0xfdc00000-0xfdcfffff
PREFETCH window: 0x0000000090300000-0x00000000903fffff
PCI: Bridge: 0000:00:0e.0
IO window: 3000-3fff
MEM window: 0xfdd00000-0xfddfffff
PREFETCH window: 0x0000000090200000-0x00000000902fffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:04:00.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:06:00.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:42:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:41:00.0
IO window: 4000-4fff
MEM window: 0xfdf00000-0xfdffffff
PREFETCH window: 0x0000000084000000-0x00000000840fffff
PCI: Bridge: 0000:40:0c.0
IO window: 4000-4fff
MEM window: 0xfdf00000-0xfdffffff
PREFETCH window: 0x0000000084000000-0x00000000840fffff
PCI: Bridge: 0000:40:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:40:0c.0 to 64
PCI: Setting latency timer of device 0000:41:00.0 to 64
PCI: Setting latency timer of device 0000:40:0d.0 to 64
PCI: Setting latency timer of device 0000:40:0e.0 to 64
bus: 00 index 0 io port: [0, 3fff]
bus: 00 index 1 mmio: [90000000, fddfffff]
bus: 00 index 2 mmio: [80000000, 83ffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [fe000000, ffffffff]
bus: 00 index 5 mmio: [280000000, fcffffffff]
bus: 01 index 0 io port: [1000, 2fff]
bus: 01 index 1 mmio: [f7e00000, f7ffffff]
bus: 01 index 2 mmio: [e8000000, efffffff]
bus: 01 index 3 io port: [0, 3fff]
bus: 01 index 4 mmio: [90000000, fddfffff]
bus: 01 index 5 mmio: [80000000, 83ffffff]
bus: 01 index 6 mmio: [a0000, bffff]
bus: 01 index 7 mmio: [fe000000, ffffffff]
bus: 01 index 8 mmio: [280000000, fcffffffff]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [f8000000, f9ffffff]
bus: 02 index 2 mmio: [90000000, 900fffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [f8000000, f9ffffff]
bus: 03 index 2 mmio: [90000000, 900fffff]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [fa000000, fbffffff]
bus: 04 index 2 mmio: [90100000, 901fffff]
bus: 04 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [fa000000, fbffffff]
bus: 05 index 2 mmio: [90100000, 901fffff]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 mmio: [0, 0]
bus: 06 index 1 mmio: [fdc00000, fdcfffff]
bus: 06 index 2 mmio: [90300000, 903fffff]
bus: 06 index 3 mmio: [0, 0]
bus: 07 index 0 mmio: [0, 0]
bus: 07 index 1 mmio: [fdc00000, fdcfffff]
bus: 07 index 2 mmio: [90300000, 903fffff]
bus: 07 index 3 mmio: [0, 0]
bus: 08 index 0 io port: [3000, 3fff]
bus: 08 index 1 mmio: [fdd00000, fddfffff]
bus: 08 index 2 mmio: [90200000, 902fffff]
bus: 08 index 3 mmio: [0, 0]
bus: 40 index 0 io port: [4000, ffff]
bus: 40 index 1 mmio: [fde00000, fdffffff]
bus: 40 index 2 mmio: [84000000, 8fffffff]
bus: 41 index 0 io port: [4000, 4fff]
bus: 41 index 1 mmio: [fdf00000, fdffffff]
bus: 41 index 2 mmio: [84000000, 840fffff]
bus: 41 index 3 mmio: [0, 0]
bus: 42 index 0 io port: [4000, 4fff]
bus: 42 index 1 mmio: [fdf00000, fdffffff]
bus: 42 index 2 mmio: [84000000, 840fffff]
bus: 42 index 3 mmio: [0, 0]
bus: 43 index 0 mmio: [0, 0]
bus: 43 index 1 mmio: [0, 0]
bus: 43 index 2 mmio: [0, 0]
bus: 43 index 3 mmio: [0, 0]
bus: 44 index 0 mmio: [0, 0]
bus: 44 index 1 mmio: [0, 0]
bus: 44 index 2 mmio: [0, 0]
bus: 44 index 3 mmio: [0, 0]
bus: 47 index 0 mmio: [0, 0]
bus: 47 index 1 mmio: [0, 0]
bus: 47 index 2 mmio: [0, 0]
bus: 47 index 3 mmio: [0, 0]
initcall pcibios_assign_resources+0x0/0x87 returned 0 after 27 msecs
calling inet_init+0x0/0x350
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x350 returned 0 after 63 msecs
calling af_unix_init+0x0/0x55
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 0 msecs
calling populate_rootfs+0x0/0xea
checking if image is initramfs... it is
Freeing initrd memory: 1321k freed
initcall populate_rootfs+0x0/0xea returned 0 after 160 msecs
calling i8259A_init_sysfs+0x0/0x22
initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 0 msecs
calling vsyscall_init+0x0/0x6e
initcall vsyscall_init+0x0/0x6e returned 0 after 0 msecs
calling sbf_init+0x0/0xd7
initcall sbf_init+0x0/0xd7 returned 0 after 0 msecs
calling i8237A_init_sysfs+0x0/0x22
initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 0 msecs
calling add_rtc_cmos+0x0/0x1d
initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
calling cache_sysfs_init+0x0/0x5d
initcall cache_sysfs_init+0x0/0x5d returned 0 after 1 msecs
calling mce_init_device+0x0/0x85
initcall mce_init_device+0x0/0x85 returned 0 after 0 msecs
calling periodic_mcheck_init+0x0/0x3f
initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs
calling thermal_throttle_init_device+0x0/0x83
initcall thermal_throttle_init_device+0x0/0x83 returned 0 after 0 msecs
calling threshold_init_device+0x0/0x49
initcall threshold_init_device+0x0/0x49 returned 0 after 0 msecs
calling msr_init+0x0/0xf2
initcall msr_init+0x0/0xf2 returned 0 after 0 msecs
calling cpuid_init+0x0/0xf2
initcall cpuid_init+0x0/0xf2 returned 0 after 0 msecs
calling microcode_init+0x0/0xbf
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
microcode: CPU2 not a capable Intel processor
microcode: CPU3 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
initcall microcode_init+0x0/0xbf returned 0 after 1 msecs
calling init_lapic_sysfs+0x0/0x2d
initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 msecs
calling ioapic_init_sysfs+0x0/0x99
initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs
calling add_pcspkr+0x0/0x43
initcall add_pcspkr+0x0/0x43 returned 0 after 0 msecs
calling audit_classes_init+0x0/0xaf
initcall audit_classes_init+0x0/0xaf returned 0 after 0 msecs
calling init_vdso_vars+0x0/0x1e7
initcall init_vdso_vars+0x0/0x1e7 returned 0 after 0 msecs
calling ia32_binfmt_init+0x0/0x14
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs
calling sysenter_setup+0x0/0x29f
initcall sysenter_setup+0x0/0x29f returned 0 after 0 msecs
calling init_aout_binfmt+0x0/0x12
initcall init_aout_binfmt+0x0/0x12 returned 0 after 0 msecs
calling create_proc_profile+0x0/0x307
initcall create_proc_profile+0x0/0x307 returned 0 after 0 msecs
calling ioresources_init+0x0/0x3c
initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs
calling uid_cache_init+0x0/0x69
initcall uid_cache_init+0x0/0x69 returned 0 after 0 msecs
calling init_posix_timers+0x0/0xb6
initcall init_posix_timers+0x0/0xb6 returned 0 after 0 msecs
calling init_posix_cpu_timers+0x0/0xd4
initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs
calling nsproxy_cache_init+0x0/0x2d
initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs
calling timekeeping_init_device+0x0/0x22
initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 msecs
calling init_clocksource_sysfs+0x0/0x50
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 msecs
calling init_timer_list_procfs+0x0/0x2c
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs
calling init_tstats_procfs+0x0/0x2c
initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 msecs
calling futex_init+0x0/0x63
initcall futex_init+0x0/0x63 returned 0 after 0 msecs
calling proc_dma_init+0x0/0x22
initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs
calling percpu_modinit+0x0/0x6f
initcall percpu_modinit+0x0/0x6f returned 0 after 0 msecs
calling kallsyms_init+0x0/0x25
initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs
calling snapshot_device_init+0x0/0x12
initcall snapshot_device_init+0x0/0x12 returned 0 after 0 msecs
calling crash_save_vmcoreinfo_init+0x0/0x42b
initcall crash_save_vmcoreinfo_init+0x0/0x42b returned 0 after 0 msecs
calling crash_notes_memory_init+0x0/0x3d
initcall crash_notes_memory_init+0x0/0x3d returned 0 after 0 msecs
calling ikconfig_init+0x0/0x39
initcall ikconfig_init+0x0/0x39 returned 0 after 0 msecs
calling audit_init+0x0/0x14d
audit: initializing netlink socket (disabled)
type=2000 audit(1213542831.899:1): initialized
initcall audit_init+0x0/0x14d returned 0 after 0 msecs
calling audit_tree_init+0x0/0x49
initcall audit_tree_init+0x0/0x49 returned 0 after 0 msecs
calling init_kprobes+0x0/0x103
initcall init_kprobes+0x0/0x103 returned 0 after 5 msecs
calling relay_init+0x0/0x14
initcall relay_init+0x0/0x14 returned 0 after 0 msecs
calling utsname_sysctl_init+0x0/0x14
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs
calling init_per_zone_pages_min+0x0/0x53
initcall init_per_zone_pages_min+0x0/0x53 returned 0 after 0 msecs
calling pdflush_init+0x0/0x1d
initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs
calling kswapd_init+0x0/0x63
initcall kswapd_init+0x0/0x63 returned 0 after 0 msecs
calling setup_vmstat+0x0/0x4a
initcall setup_vmstat+0x0/0x4a returned 0 after 0 msecs
calling procswaps_init+0x0/0x22
initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs
calling hugetlb_init+0x0/0x98
Total HugeTLB memory allocated, 0
initcall hugetlb_init+0x0/0x98 returned 0 after 0 msecs
calling init_tmpfs+0x0/0xda
initcall init_tmpfs+0x0/0xda returned 0 after 0 msecs
calling slab_sysfs_init+0x0/0xf0
initcall slab_sysfs_init+0x0/0xf0 returned 0 after 5 msecs
calling fasync_init+0x0/0x2a
initcall fasync_init+0x0/0x2a returned 0 after 0 msecs
calling aio_setup+0x0/0x6e
initcall aio_setup+0x0/0x6e returned 0 after 0 msecs
calling inotify_setup+0x0/0x12
initcall inotify_setup+0x0/0x12 returned 0 after 0 msecs
calling inotify_user_setup+0x0/0xb8
initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs
calling init_sys32_ioctl+0x0/0x85
initcall init_sys32_ioctl+0x0/0x85 returned 0 after 0 msecs
calling init_mbcache+0x0/0x14
initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs
calling dnotify_init+0x0/0x2a
initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs
calling vmcore_init+0x0/0x894
initcall vmcore_init+0x0/0x894 returned 0 after 0 msecs
calling configfs_init+0x0/0xb3
initcall configfs_init+0x0/0xb3 returned 0 after 0 msecs
calling init_devpts_fs+0x0/0x3f
initcall init_devpts_fs+0x0/0x3f returned 0 after 0 msecs
calling init_ext3_fs+0x0/0x6a
initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs
calling journal_init+0x0/0x99
initcall journal_init+0x0/0x99 returned 0 after 0 msecs
calling init_ext2_fs+0x0/0x6a
initcall init_ext2_fs+0x0/0x6a returned 0 after 0 msecs
calling init_ramfs_fs+0x0/0x12
initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs
calling init_hugetlbfs_fs+0x0/0x98
initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 msecs
calling init_fat_fs+0x0/0x4f
initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs
calling init_msdos_fs+0x0/0x12
initcall init_msdos_fs+0x0/0x12 returned 0 after 0 msecs
calling init_vfat_fs+0x0/0x12
initcall init_vfat_fs+0x0/0x12 returned 0 after 0 msecs
calling init_iso9660_fs+0x0/0x6c
initcall init_iso9660_fs+0x0/0x6c returned 0 after 0 msecs
calling init_nfs_fs+0x0/0x10e
initcall init_nfs_fs+0x0/0x10e returned 0 after 0 msecs
calling init_nfsd+0x0/0xbb
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
initcall init_nfsd+0x0/0xbb returned 0 after 0 msecs
calling init_nlm+0x0/0x22
initcall init_nlm+0x0/0x22 returned 0 after 0 msecs
calling init_nls_cp437+0x0/0x12
initcall init_nls_cp437+0x0/0x12 returned 0 after 0 msecs
calling init_nls_cp850+0x0/0x12
initcall init_nls_cp850+0x0/0x12 returned 0 after 0 msecs
calling init_nls_ascii+0x0/0x12
initcall init_nls_ascii+0x0/0x12 returned 0 after 0 msecs
calling init_nls_iso8859_1+0x0/0x12
initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 msecs
calling init_nls_iso8859_15+0x0/0x12
initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 0 msecs
calling init_nls_utf8+0x0/0x25
initcall init_nls_utf8+0x0/0x25 returned 0 after 0 msecs
calling ipc_init+0x0/0x23
msgmni has been set to 16013
initcall ipc_init+0x0/0x23 returned 0 after 0 msecs
calling ipc_sysctl_init+0x0/0x14
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 0 msecs
calling init_mqueue_fs+0x0/0xc6
initcall init_mqueue_fs+0x0/0xc6 returned 0 after 0 msecs
calling crypto_algapi_init+0x0/0xd
initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs
calling blkcipher_module_init+0x0/0x2a
initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs
calling cryptomgr_init+0x0/0x12
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs
calling hmac_module_init+0x0/0x12
initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs
calling md5_mod_init+0x0/0x12
initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs
calling sha1_generic_mod_init+0x0/0x12
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs
calling crypto_cbc_module_init+0x0/0x12
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs
calling des_generic_mod_init+0x0/0x3f
initcall des_generic_mod_init+0x0/0x3f returned 0 after 0 msecs
calling cast5_mod_init+0x0/0x12
initcall cast5_mod_init+0x0/0x12 returned 0 after 0 msecs
calling deflate_mod_init+0x0/0x12
initcall deflate_mod_init+0x0/0x12 returned 0 after 0 msecs
calling crc32c_mod_init+0x0/0x12
initcall crc32c_mod_init+0x0/0x12 returned 0 after 0 msecs
calling crypto_authenc_module_init+0x0/0x12
initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 msecs
calling bsg_init+0x0/0x11f
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
initcall bsg_init+0x0/0x11f returned 0 after 0 msecs
calling noop_init+0x0/0x14
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after 0 msecs
calling as_init+0x0/0x14
io scheduler anticipatory registered
initcall as_init+0x0/0x14 returned 0 after 0 msecs
calling deadline_init+0x0/0x14
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after 0 msecs
calling cfq_init+0x0/0x9d
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x9d returned 0 after 0 msecs
calling percpu_counter_startup+0x0/0x14
initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
calling pci_init+0x0/0x35
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: HCRESET not completed yet!
pci 0000:40:00.0: Enabling HT MSI Mapping
pci 0000:40:0c.0: Enabling HT MSI Mapping
pci 0000:40:0c.0: Found enabled HT MSI Mapping
pci 0000:40:0d.0: Enabling HT MSI Mapping
pci 0000:40:0d.0: Found enabled HT MSI Mapping
pci 0000:40:0e.0: Enabling HT MSI Mapping
pci 0000:40:0e.0: Found enabled HT MSI Mapping
initcall pci_init+0x0/0x35 returned 0 after 8 msecs
calling pci_proc_init+0x0/0x6a
initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs
calling pcie_portdrv_init+0x0/0x4d
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie01]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie01]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie01]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie01]
Allocate Port Service[0000:00:0e.0:pcie03]
PCI: Setting latency timer of device 0000:40:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0c.0:pcie00]
Allocate Port Service[0000:40:0c.0:pcie01]
Allocate Port Service[0000:40:0c.0:pcie03]
PCI: Setting latency timer of device 0000:40:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0d.0:pcie00]
Allocate Port Service[0000:40:0d.0:pcie01]
Allocate Port Service[0000:40:0d.0:pcie03]
PCI: Setting latency timer of device 0000:40:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0e.0:pcie00]
Allocate Port Service[0000:40:0e.0:pcie01]
Allocate Port Service[0000:40:0e.0:pcie03]
initcall pcie_portdrv_init+0x0/0x4d returned 0 after 9 msecs
calling fb_console_init+0x0/0x129
initcall fb_console_init+0x0/0x129 returned 0 after 0 msecs
calling rivafb_init+0x0/0x1a5
initcall rivafb_init+0x0/0x1a5 returned 0 after 0 msecs
calling nvidiafb_init+0x0/0x2b6
initcall nvidiafb_init+0x0/0x2b6 returned 0 after 0 msecs
calling vt8623fb_init+0x0/0x5f
initcall vt8623fb_init+0x0/0x5f returned 0 after 0 msecs
calling vesafb_init+0x0/0x235
initcall vesafb_init+0x0/0x235 returned 0 after 0 msecs
calling acpi_reserve_resources+0x0/0xeb
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs
calling acpi_ac_init+0x0/0x45
initcall acpi_ac_init+0x0/0x45 returned 0 after 0 msecs
calling acpi_button_init+0x0/0x5e
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
initcall acpi_button_init+0x0/0x5e returned 0 after 0 msecs
calling acpi_fan_init+0x0/0x5e
initcall acpi_fan_init+0x0/0x5e returned 0 after 0 msecs
calling irqrouter_init_sysfs+0x0/0x38
initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 0 msecs
calling acpi_processor_init+0x0/0x113
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
initcall acpi_processor_init+0x0/0x113 returned 0 after 1 msecs
calling acpi_container_init+0x0/0x42
initcall acpi_container_init+0x0/0x42 returned 0 after 1 msecs
calling acpi_thermal_init+0x0/0x83
initcall acpi_thermal_init+0x0/0x83 returned 0 after 0 msecs
calling rand_initialize+0x0/0x2c
initcall rand_initialize+0x0/0x2c returned 0 after 0 msecs
calling tty_init+0x0/0x1c5
Clocksource tsc unstable (delta = 1553653552 ns)
initcall tty_init+0x0/0x1c5 returned 0 after 29 msecs
calling pty_init+0x0/0x275
initcall pty_init+0x0/0x275 returned 0 after 0 msecs
calling raw_init+0x0/0xd4
initcall raw_init+0x0/0xd4 returned 0 after 0 msecs
calling hpet_init+0x0/0x6a
hpet_resources: 0xfed00000 is busy
initcall hpet_init+0x0/0x6a returned 0 after 0 msecs
calling nvram_init+0x0/0x8a
Non-volatile memory driver v1.2
initcall nvram_init+0x0/0x8a returned 0 after 0 msecs
calling mod_init+0x0/0x1fb
initcall mod_init+0x0/0x1fb returned -19 after 0 msecs
calling mod_init+0x0/0xba
initcall mod_init+0x0/0xba returned -19 after 0 msecs
calling agp_init+0x0/0x26
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26 returned 0 after 0 msecs
calling agp_intel_init+0x0/0x29
initcall agp_intel_init+0x0/0x29 returned 0 after 0 msecs
calling agp_via_init+0x0/0x29
initcall agp_via_init+0x0/0x29 returned 0 after 0 msecs
calling drm_core_init+0x0/0xf9
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0xf9 returned 0 after 0 msecs
calling r128_init+0x0/0x1e
initcall r128_init+0x0/0x1e returned 0 after 0 msecs
calling radeon_init+0x0/0x1e
ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKY] -> GSI 18 (level, high) -> IRQ 18
[drm] Initialized radeon 1.28.0 20060524 on minor 0
initcall radeon_init+0x0/0x1e returned 0 after 3 msecs
calling via_init+0x0/0x23
initcall via_init+0x0/0x23 returned 0 after 0 msecs
calling ipmi_init_msghandler_mod+0x0/0xd
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 0 msecs
calling init_ipmi_devintf+0x0/0xfa
ipmi device interface
initcall init_ipmi_devintf+0x0/0xfa returned 0 after 0 msecs
calling init_ipmi_si+0x0/0x78e
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16
Using irq 16
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
initcall init_ipmi_si+0x0/0x78e returned 0 after 187 msecs
calling ipmi_wdog_init+0x0/0x12e
IPMI Watchdog: driver initialized
initcall ipmi_wdog_init+0x0/0x12e returned 0 after 6 msecs
calling ipmi_poweroff_init+0x0/0x8d
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
IPMI poweroff: ATCA Detect mfg 0xB prod 0x0
IPMI poweroff: Unable to find a poweroff function that will work, giving up
IPMI poweroff: ATCA Detect mfg 0xB prod 0x0
IPMI poweroff: Unable to find a poweroff function that will work, giving up
initcall ipmi_poweroff_init+0x0/0x8d returned 0 after 44 msecs
calling hangcheck_init+0x0/0x8a
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
initcall hangcheck_init+0x0/0x8a returned 0 after 0 msecs
calling cn_proc_init+0x0/0x3d
initcall cn_proc_init+0x0/0x3d returned 0 after 0 msecs
calling serial8250_init+0x0/0x131
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_init+0x0/0x131 returned 0 after 1 msecs
calling serial8250_pnp_init+0x0/0x12
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 0 msecs
calling serial8250_pci_init+0x0/0x1b
initcall serial8250_pci_init+0x0/0x1b returned 0 after 0 msecs
calling topology_sysfs_init+0x0/0x49
initcall topology_sysfs_init+0x0/0x49 returned 0 after 0 msecs
calling floppy_init+0x0/0xf0f
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
initcall floppy_init+0x0/0xf0f returned -19 after 2874 msecs
calling brd_init+0x0/0x167
brd: module loaded
initcall brd_init+0x0/0x167 returned 0 after 3 msecs
calling bnx2_init+0x0/0x1b
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April 29, 2008)
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17
eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16
eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4
initcall bnx2_init+0x0/0x1b returned 0 after 48 msecs
calling net_olddevs_init+0x0/0xa0
initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs
calling b44_init+0x0/0x63
initcall b44_init+0x0/0x63 returned 0 after 0 msecs
calling tun_init+0x0/0xa0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
initcall tun_init+0x0/0xa0 returned 0 after 0 msecs
calling init_netconsole+0x0/0x1b5
netconsole: local port 54410
netconsole: local IP 139.185.50.77
netconsole: interface eth0
netconsole: remote port 54410
netconsole: remote IP 139.185.50.76
netconsole: remote ethernet address 00:18:fe:34:1c:3d
netconsole: device eth0 not up yet, forcing it
bnx2: eth0: using MSI
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1b5 returned 0 after 4170 msecs
calling scsi_tgt_init+0x0/0x7f
initcall scsi_tgt_init+0x0/0x7f returned 0 after 0 msecs
calling raid_init+0x0/0x12
initcall raid_init+0x0/0x12 returned 0 after 0 msecs
calling spi_transport_init+0x0/0x2e
initcall spi_transport_init+0x0/0x2e returned 0 after 0 msecs
calling fc_transport_init+0x0/0x4c
initcall fc_transport_init+0x0/0x4c returned 0 after 0 msecs
calling iscsi_transport_init+0x0/0x118
Loading iSCSI transport class v2.0-869.
initcall iscsi_transport_init+0x0/0x118 returned 0 after 0 msecs
calling sas_transport_init+0x0/0xbb
initcall sas_transport_init+0x0/0xbb returned 0 after 0 msecs
calling sas_class_init+0x0/0x31
initcall sas_class_init+0x0/0x31 returned 0 after 0 msecs
calling init_sd+0x0/0xff
Driver 'sd' needs updating - please use bus_type methods
initcall init_sd+0x0/0xff returned 0 after 0 msecs
calling init_sg+0x0/0x153
initcall init_sg+0x0/0x153 returned 0 after 0 msecs
calling mon_init+0x0/0x103
initcall mon_init+0x0/0x103 returned 0 after 0 msecs
calling i8042_init+0x0/0x39f
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x39f returned 0 after 2 msecs
calling serport_init+0x0/0x34
initcall serport_init+0x0/0x34 returned 0 after 0 msecs
calling serio_raw_init+0x0/0x1b
initcall serio_raw_init+0x0/0x1b returned 0 after 0 msecs
calling mousedev_init+0x0/0x61
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x61 returned 0 after 0 msecs
calling evdev_init+0x0/0x12
initcall evdev_init+0x0/0x12 returned 0 after 23 msecs
calling atkbd_init+0x0/0x27
initcall atkbd_init+0x0/0x27 returned 0 after 0 msecs
calling psmouse_init+0x0/0x6d
initcall psmouse_init+0x0/0x6d returned 0 after 58 msecs
calling pcspkr_init+0x0/0x12
input: PC Speaker as /class/input/input1
initcall pcspkr_init+0x0/0x12 returned 0 after 32 msecs
calling uinput_init+0x0/0x12
initcall uinput_init+0x0/0x12 returned 0 after 0 msecs
calling cmos_init+0x0/0x30
initcall cmos_init+0x0/0x30 returned 0 after 0 msecs
calling i2c_dev_init+0x0/0x9f
i2c /dev entries driver
initcall i2c_dev_init+0x0/0x9f returned 0 after 0 msecs
calling amd756_init+0x0/0x1b
initcall amd756_init+0x0/0x1b returned 0 after 0 msecs
calling i2c_amd8111_init+0x0/0x1b
initcall i2c_amd8111_init+0x0/0x1b returned 0 after 0 msecs
calling i2c_i801_init+0x0/0x1b
initcall i2c_i801_init+0x0/0x1b returned 0 after 0 msecs
calling i2c_i810_init+0x0/0x1b
initcall i2c_i810_init+0x0/0x1b returned 0 after 0 msecs
calling nforce2_init+0x0/0x1b
initcall nforce2_init+0x0/0x1b returned 0 after 0 msecs
calling i2c_piix4_init+0x0/0x1b
initcall i2c_piix4_init+0x0/0x1b returned 0 after 0 msecs
calling i2c_vt586b_init+0x0/0x1b
initcall i2c_vt586b_init+0x0/0x1b returned 0 after 0 msecs
calling i2c_vt596_init+0x0/0x1b
initcall i2c_vt596_init+0x0/0x1b returned 0 after 0 msecs
calling coretemp_init+0x0/0x158
initcall coretemp_init+0x0/0x158 returned -19 after 0 msecs
calling k8temp_init+0x0/0x1b
initcall k8temp_init+0x0/0x1b returned 0 after 0 msecs
calling sm_via686a_init+0x0/0x1b
initcall sm_via686a_init+0x0/0x1b returned 0 after 0 msecs
calling vt1211_init+0x0/0x14e
initcall vt1211_init+0x0/0x14e returned -19 after 0 msecs
calling sm_vt8231_init+0x0/0x1b
initcall sm_vt8231_init+0x0/0x1b returned 0 after 0 msecs
calling watchdog_init+0x0/0xb4
SoftDog: cannot register miscdev on minor=130 (err=-16)
initcall watchdog_init+0x0/0xb4 returned -16 after 0 msecs
initcall watchdog_init+0x0/0xb4 returned with error code -16
calling edac_init+0x0/0x9d
EDAC MC: Ver: 2.1.0 Jun 15 2008
initcall edac_init+0x0/0x9d returned 0 after 0 msecs
calling i5000_init+0x0/0x41
initcall i5000_init+0x0/0x41 returned 0 after 0 msecs
calling e752x_init+0x0/0x42
initcall e752x_init+0x0/0x42 returned 0 after 0 msecs
calling i82975x_init+0x0/0xa0
initcall i82975x_init+0x0/0xa0 returned -19 after 0 msecs
calling cpufreq_stats_init+0x0/0x8f
initcall cpufreq_stats_init+0x0/0x8f returned 0 after 0 msecs
calling cpufreq_gov_powersave_init+0x0/0x12
initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 msecs
calling cpufreq_gov_dbs_init+0x0/0x46
initcall cpufreq_gov_dbs_init+0x0/0x46 returned 0 after 0 msecs
calling cpufreq_gov_dbs_init+0x0/0x12
initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 msecs
calling init_ladder+0x0/0x12
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after 0 msecs
calling hid_init+0x0/0x8
initcall hid_init+0x0/0x8 returned 0 after 0 msecs
calling hid_init+0x0/0x61
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0x61 returned 0 after 0 msecs
calling sysctl_core_init+0x0/0x12
initcall sysctl_core_init+0x0/0x12 returned 0 after 0 msecs
calling flow_cache_init+0x0/0x1a7
initcall flow_cache_init+0x0/0x1a7 returned 0 after 0 msecs
calling sysctl_ipv4_init+0x0/0x4e
initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 0 msecs
calling ipip_init+0x0/0x71
IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x71 returned 0 after 0 msecs
calling ipgre_init+0x0/0x71
GRE over IPv4 tunneling driver
initcall ipgre_init+0x0/0x71 returned 0 after 0 msecs
calling init_syncookies+0x0/0x19
initcall init_syncookies+0x0/0x19 returned 0 after 0 msecs
calling ah4_init+0x0/0x68
initcall ah4_init+0x0/0x68 returned 0 after 0 msecs
calling esp4_init+0x0/0x68
initcall esp4_init+0x0/0x68 returned 0 after 0 msecs
calling ipcomp4_init+0x0/0x68
initcall ipcomp4_init+0x0/0x68 returned 0 after 0 msecs
calling ipip_init+0x0/0x68
initcall ipip_init+0x0/0x68 returned 0 after 0 msecs
calling xfrm4_beet_init+0x0/0x17
initcall xfrm4_beet_init+0x0/0x17 returned 0 after 0 msecs
calling tunnel4_init+0x0/0x32
initcall tunnel4_init+0x0/0x32 returned 0 after 0 msecs
calling xfrm4_transport_init+0x0/0x17
initcall xfrm4_transport_init+0x0/0x17 returned 0 after 0 msecs
calling xfrm4_mode_tunnel_init+0x0/0x17
initcall xfrm4_mode_tunnel_init+0x0/0x17 returned 0 after 0 msecs
calling inet_diag_init+0x0/0x69
initcall inet_diag_init+0x0/0x69 returned 0 after 0 msecs
calling tcp_diag_init+0x0/0x12
initcall tcp_diag_init+0x0/0x12 returned 0 after 0 msecs
calling bictcp_register+0x0/0x12
TCP bic registered
initcall bictcp_register+0x0/0x12 returned 0 after 0 msecs
calling xfrm_user_init+0x0/0x58
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x58 returned 0 after 0 msecs
calling packet_init+0x0/0x47
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 0 msecs
calling ipsec_pfkey_init+0x0/0x8c
NET: Registered protocol family 15
initcall ipsec_pfkey_init+0x0/0x8c returned 0 after 0 msecs
calling init_sunrpc+0x0/0x5d
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
initcall init_sunrpc+0x0/0x5d returned 0 after 0 msecs
calling init_rpcsec_gss+0x0/0x38
initcall init_rpcsec_gss+0x0/0x38 returned 0 after 0 msecs
calling init_kerberos_module+0x0/0x2f
initcall init_kerberos_module+0x0/0x2f returned 0 after 0 msecs
calling init_spkm3_module+0x0/0x2f
initcall init_spkm3_module+0x0/0x2f returned 0 after 0 msecs
calling powernowk8_init+0x0/0x8f
powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
initcall powernowk8_init+0x0/0x8f returned 0 after 3 msecs
calling acpi_cpufreq_init+0x0/0x8f
initcall acpi_cpufreq_init+0x0/0x8f returned -16 after 0 msecs
initcall acpi_cpufreq_init+0x0/0x8f returned with error code -16
calling centrino_init+0x0/0x33
initcall centrino_init+0x0/0x33 returned -19 after 0 msecs
calling cpufreq_p4_init+0x0/0x60
initcall cpufreq_p4_init+0x0/0x60 returned -19 after 0 msecs
calling hpet_insert_resource+0x0/0x23
initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 msecs
calling lapic_insert_resource+0x0/0x40
initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 msecs
calling init_lapic_nmi_sysfs+0x0/0x38
initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs
calling ioapic_insert_resources+0x0/0x4f
initcall ioapic_insert_resources+0x0/0x4f returned 0 after 0 msecs
calling init_oops_id+0x0/0x23
initcall init_oops_id+0x0/0x23 returned 0 after 0 msecs
calling disable_boot_consoles+0x0/0x3a
initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 msecs
calling pm_qos_power_init+0x0/0x61
initcall pm_qos_power_init+0x0/0x61 returned 0 after 0 msecs
calling software_resume+0x0/0x13f
initcall software_resume+0x0/0x13f returned -2 after 0 msecs
initcall software_resume+0x0/0x13f returned with error code -2
calling debugfs_kprobe_init+0x0/0x89
initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 0 msecs
calling taskstats_init+0x0/0x95
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 0 msecs
calling random32_reseed+0x0/0x69
initcall random32_reseed+0x0/0x69 returned 0 after 0 msecs
calling pci_sysfs_init+0x0/0x4c
initcall pci_sysfs_init+0x0/0x4c returned 0 after 0 msecs
calling acpi_wakeup_device_init+0x0/0xa5
initcall acpi_wakeup_device_init+0x0/0xa5 returned 0 after 0 msecs
calling acpi_sleep_proc_init+0x0/0x55
initcall acpi_sleep_proc_init+0x0/0x55 returned 0 after 0 msecs
calling seqgen_init+0x0/0xf
initcall seqgen_init+0x0/0xf returned 0 after 0 msecs
calling scsi_complete_async_scans+0x0/0xe5
initcall scsi_complete_async_scans+0x0/0xe5 returned 0 after 0 msecs
calling rtc_hctosys+0x0/0x17b
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
initcall rtc_hctosys+0x0/0x17b returned -19 after 0 msecs
calling edd_init+0x0/0x2f1
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
initcall edd_init+0x0/0x2f1 returned -19 after 0 msecs
calling pci_mmcfg_late_insert_resources+0x0/0x43
initcall pci_mmcfg_late_insert_resources+0x0/0x43 returned 0 after 0 msecs
calling tcp_congestion_default+0x0/0x12
initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 msecs
Freeing unused kernel memory: 344k freed
Write protecting the kernel read-only data: 4556k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 1
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
insmod used greatest stack depth: 5360 bytes left
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
insmod used greatest stack depth: 5336 bytes left
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000
usb 1-1: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
HP CISS Driver (v 3.6.20)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54
ACPI: PCI Interrupt 0000:42:08.0[A] -> Link [LNKA] -> GSI 54 (level, high) -> IRQ 54
usb 1-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /class/input/input2
cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 503 using DAC
cciss cciss0: SendCmd Invalid command list address returned! (c)
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: HP Virtual Keyboard as /class/input/input3
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 7 ports detected
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
cciss/c0d1: unknown partition table
insmod used greatest stack depth: 4080 bytes left
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
modprobe used greatest stack depth: 3584 bytes left
tg3.c:v3.92.1 (June 9, 2008)
ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19
ACPI: PCI Interrupt 0000:07:04.0[A] -> Link [LNKZ] -> GSI 19 (level, high) -> IRQ 19
eth2: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:2f
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth2: dma_rwctrl[76148000] dma_mask[40-bit]
ACPI: PCI Interrupt 0000:07:04.1[B] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16
eth3: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:30
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth3: dma_rwctrl[76148000] dma_mask[40-bit]
next prev parent reply other threads:[~2008-06-16 1:18 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-14 20:04 2.6.26-rc6-git2: Reported regressions from 2.6.25 Rafael J. Wysocki
2008-06-14 20:04 ` [Bug 10493] mips BCM47XX compile error Rafael J. Wysocki
2008-06-14 21:26 ` Adrian Bunk
2008-06-14 20:12 ` [Bug 10711] BUG: unable to handle kernel paging request - scsi_bus_uevent Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10642] general protection fault: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10629] 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10741] bug in `tty: BKL pushdown'? Rafael J. Wysocki
2008-06-16 10:03 ` Johannes Weiner
2008-06-16 10:33 ` Alan Cox
2008-06-16 11:46 ` Alan Cox
2008-06-16 15:33 ` Johannes Weiner
2008-06-16 18:22 ` Alan Cox
2008-06-19 11:06 ` Johannes Weiner
2008-06-14 20:12 ` [Bug 10725] Write protect on on Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10714] Badness seen on 2.6.26-rc2 with lockdep enabled Rafael J. Wysocki
2008-06-14 23:04 ` Adrian Bunk
2008-06-14 23:29 ` Benjamin Herrenschmidt
2008-06-14 20:12 ` [Bug 10726] x86-64 NODES_SHIFT compile failure Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10724] ACPI: EC: GPE storm detected, disabling EC GPE Rafael J. Wysocki
2008-06-14 22:29 ` Justin Mattock
2008-06-14 20:12 ` [Bug 10730] build issue #503 for v2.6.26-rc2-433-gf26a398 : undefined reference to `request_firmware' Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10764] some serial configurations are now broken Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10819] Fatal DMA error with b43 driver since 2.6.26 Rafael J. Wysocki
2008-06-14 21:34 ` Michael Buesch
2008-06-14 20:12 ` [Bug 10828] [2.6.25-git18 => 2.6.26-rc1-git1] Xorg crash with xf86MapVidMem error Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10799] sky2 general protection fault Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10821] rt25xx: lock dependency warning, association failure, and kmalloc corruption Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10794] mips: CONF_CM_DEFAULT build error Rafael J. Wysocki
2008-06-14 21:24 ` Adrian Bunk
2008-06-14 20:12 ` [Bug 10843] Display artifacts on XOrg logout with PAT kernel and VESA framebuffer Rafael J. Wysocki
2008-06-14 21:59 ` Frans Pop
2008-06-15 10:22 ` Romano Giannetti
2008-06-15 10:39 ` Adrian Bunk
2008-06-15 11:25 ` Romano Giannetti
2008-06-15 12:23 ` Adrian Bunk
2008-06-15 10:40 ` Rafael J. Wysocki
2008-06-15 11:25 ` Frans Pop
2008-06-15 11:35 ` Romano Giannetti
2008-06-15 11:26 ` Romano Giannetti
2008-06-15 19:29 ` Siddha, Suresh B
2008-06-15 23:02 ` Frans Pop
2008-06-16 0:41 ` Suresh Siddha
2008-06-16 10:53 ` Frans Pop
2008-06-16 11:07 ` Frans Pop
2008-06-23 12:38 ` Frans Pop
2008-06-24 23:22 ` Suresh Siddha
2008-09-12 10:54 ` Frans Pop
2008-09-12 12:43 ` Pallipadi, Venkatesh
2008-09-12 13:33 ` Frans Pop
2008-09-12 16:05 ` Pallipadi, Venkatesh
2008-09-13 0:24 ` Pallipadi, Venkatesh
2008-09-13 9:49 ` Frans Pop
2008-09-14 13:25 ` Ingo Molnar
2008-06-14 20:12 ` [Bug 10830] two different oopses with 2.6.26-rc4 Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10860] total system freeze at boot with 2.6.26-rc Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10815] 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10826] NFS oops in 2.6.26rc4 Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10827] 2.6.26rc4 GFS2 oops Rafael J. Wysocki
2008-06-22 9:09 ` Adrian Bunk
2008-06-23 14:40 ` [Cluster-devel] " Bob Peterson
2008-06-23 15:14 ` Adrian Bunk
2008-06-23 15:32 ` Bob Peterson
2008-06-23 17:02 ` Rafael J. Wysocki
2008-06-23 17:05 ` Adrian Bunk
2008-06-14 20:12 ` [Bug 10786] 2.6.26-rc3 64bit SMP does not boot on J5600 Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10861] 2.6.26-rc4-git2 - long pause during boot Rafael J. Wysocki
2008-06-15 6:12 ` Chris Clayton
2008-06-14 20:12 ` [Bug 10903] ssh connections hang with 2.6.26-rc5 Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10864] [regression][bisected] ~90,000 wakeups as of 2.6.26-rc3 Rafael J. Wysocki
2008-06-15 6:30 ` Németh Márton
2008-06-15 7:50 ` Ingo Molnar
2008-06-15 8:54 ` Németh Márton
2008-06-15 10:48 ` Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10892] Sometime (often) X come out blank (black screen) on cold boot - Intel chipset Rafael J. Wysocki
2008-06-15 10:21 ` Romano Giannetti
2008-06-14 20:12 ` [Bug 10862] forcedeth: lockdep warning on ethtool -s Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10866] /dev/rtc was missing until I disabled CONFIG_RTC_CLASS Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki
2008-06-15 16:35 ` Randy Dunlap
2008-06-15 19:18 ` Yinghai Lu
2008-06-16 1:11 ` Randy Dunlap [this message]
2008-06-16 4:12 ` Yinghai Lu
2008-06-16 5:14 ` Randy Dunlap
2008-06-16 4:15 ` Yinghai Lu
2008-06-16 15:32 ` Randy Dunlap
2008-06-14 20:12 ` [Bug 10865] i get the following oops trying to mount an ntfs partition on thinkpad Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10868] Oops on loading ipaq module since 2.6.26, prevents use of device Rafael J. Wysocki
2008-06-14 21:26 ` Alan Cox
2008-06-15 6:44 ` Adam Williamson
2008-06-16 9:10 ` Alan Cox
2008-06-14 20:12 ` [Bug 10905] 2.6.26: x86/kernel/pci_dma.c: gfp |= __GFP_NORETRY ? Rafael J. Wysocki
2008-06-16 11:26 ` Miquel van Smoorenburg
2008-06-16 13:19 ` Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10912] Regressions in the last kernels Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10906] repeatable slab corruption with LTP msgctl08 Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 9791] Clock is running too fast^Wslow using acpi_pm clocksource Rafael J. Wysocki
2008-06-14 20:12 ` [Bug 10908] IPF Montvale machine panic when running a network-relevent testing Rafael J. Wysocki
2008-06-14 21:42 ` 2.6.26-rc6-git2: Reported regressions from 2.6.25 Linus Torvalds
2008-06-14 22:00 ` Maciej W. Rozycki
2008-06-15 0:00 ` Linus Torvalds
2008-06-15 23:31 ` Maciej W. Rozycki
2008-06-17 15:24 ` Dave Jones
2008-06-14 23:31 ` David Miller
2008-06-15 0:41 ` Linus Torvalds
2008-06-15 1:07 ` David Miller
2008-06-15 2:15 ` Linus Torvalds
2008-06-15 10:51 ` Rafael J. Wysocki
2008-06-14 22:09 ` Vegard Nossum
2008-06-15 11:14 ` Rafael J. Wysocki
-- strict thread matches above, loose matches on Subject: below --
2008-07-06 11:39 2.6.26-rc9: " Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki
2008-07-06 18:17 ` Randy Dunlap
2008-07-06 18:33 ` Linus Torvalds
2008-07-07 6:32 ` Ingo Molnar
2008-07-07 6:57 ` Yinghai Lu
2008-07-07 18:39 ` Randy Dunlap
2008-07-07 22:40 ` Randy Dunlap
2008-07-08 0:24 ` Yinghai Lu
2008-07-08 5:28 ` Randy Dunlap
2008-07-08 7:07 ` Yinghai Lu
2008-07-08 15:44 ` Randy Dunlap
2008-07-08 19:02 ` Yinghai Lu
2008-07-08 5:16 ` Ingo Molnar
2008-07-08 15:39 ` Randy Dunlap
2008-07-07 6:42 ` Ingo Molnar
2008-07-07 7:15 ` Yinghai Lu
2008-07-07 7:24 ` Ingo Molnar
2008-06-29 18:15 2.6.26-rc8: Reported regressions from 2.6.25 Rafael J. Wysocki
2008-06-29 18:18 ` [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki
2008-07-05 20:51 ` Randy Dunlap
2008-06-22 17:49 2.6.26-rc7-git2: Reported regressions from 2.6.25 Rafael J. Wysocki
2008-06-22 17:54 ` [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki
2008-06-25 17:48 ` Randy Dunlap
2008-06-07 20:38 2.6.26-rc5-git2: Reported regressions from 2.6.25 Rafael J. Wysocki
2008-06-07 20:42 ` [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki
2008-06-11 20:30 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080615181101.bcbab2ef.randy.dunlap@oracle.com \
--to=randy.dunlap@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome