From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757751AbYFQM2u (ORCPT ); Tue, 17 Jun 2008 08:28:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755731AbYFQM2m (ORCPT ); Tue, 17 Jun 2008 08:28:42 -0400 Received: from userg501.nifty.com ([202.248.238.81]:29721 "EHLO userg501.nifty.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755713AbYFQM2k (ORCPT ); Tue, 17 Jun 2008 08:28:40 -0400 DomainKey-Signature: a=rsa-sha1; s=userg501; d=nifty.com; c=nofws; q=dns; h=date:from:to:cc:subject:message-id:in-reply-to:references: x-mailer:mime-version:content-type:content-transfer-encoding; b=wFHykoM3twGjALc6VNSiKQpnpNHxjHluzxRIEJQPYRFp9UUoXUJLSVJ4sJLtRXee4 RW6P5Pmx6xBElMmg7Tv1w== X-Nifty-SrcIP: [220.145.30.185] Date: Tue, 17 Jun 2008 21:23:45 +0900 From: Komuro To: Tejun Heo Cc: Jeff Garzik , Dominik Brodowski , jgarzik@redhat.com, linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pcmcia , Kristoffer Ericson Subject: Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB Message-Id: <20080617212345.c452d8c5.komurojun-mbn@nifty.com> In-Reply-To: <485669A0.6000404@gmail.com> References: <20080528225049.9a134e0d.Kristoffer.Ericson@Gmail.com> <20080528222740.GB20893@isilmar.linta.de> <20080530135728.be02d3dc.Kristoffer.Ericson@Gmail.com> <20080607223716.7d142072.komurojun-mbn@nifty.com> <20080611072029.GB28692@comet.dominikbrodowski.net> <20080614120055.ad8fbee0.komurojun-mbn@nifty.com> <48537149.4040102@garzik.org> <20080614213612.96873c25.komurojun-mbn@nifty.com> <4855D8E2.10409@gmail.com> <20080616221145.e3b069b9.komurojun-mbn@nifty.com> <485669A0.6000404@gmail.com> X-Mailer: Sylpheed 2.3.1 (GTK+ 2.10.11; i386-redhat-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, Here is the log again. pcmcia: registering new device pcmcia0.0 pata_pcmcia 0.0: XXX ENTER Pid: 1648, comm: modprobe Not tainted 2.6.26-rc5 #3 [] pcmcia_init_one+0x34/0x585 [pata_pcmcia] [] pccard_get_tuple_data+0x53/0x5c [] iput+0x2a/0x4a [] pcmcia_device_probe+0xa6/0xf6 [] driver_probe_device+0x103/0x12c [] __driver_attach+0x0/0x55 [] driver_probe_device+0xb5/0x12c [] __driver_attach+0x37/0x55 [] bus_for_each_dev+0x37/0x59 [] driver_attach+0x11/0x13 [] __driver_attach+0x0/0x55 [] bus_add_driver+0x8a/0x1a7 [] kset_find_obj+0x20/0x4b [] driver_register+0x6d/0xc1 [] pcmcia_register_driver+0xaf/0xdb [] sys_init_module+0x1844/0x19b4 [] pcmcia_request_irq+0x0/0x1d6 [] sysenter_past_esp+0x6a/0x91 ======================= scsi2 : pata_pcmcia ata3: PATA max PIO0 cmd 0xd100 ctl 0xd10e irq 3 ata3.00: CFA: , Ver.1.0, max PIO2 ata3.00: 32000 sectors, multi 0: LBA ata3.00: configured for PIO0 ata3.00: configured for PIO0 ata3: EH complete isa bounce pool size: 16 pages scsi 2:0:0:0: Direct-Access ATA Ver. PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 32000 512-byte hardware sectors (16 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 32000 512-byte hardware sectors (16 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg2 type 0 pata_pcmcia 0.0: XXX LEAVE 0 pcmcia: registering new device pcmcia0.1 pata_pcmcia 0.1: XXX ENTER Pid: 6, comm: events/0 Not tainted 2.6.26-rc5 #3 [] pcmcia_init_one+0x34/0x585 [pata_pcmcia] [] pccard_get_tuple_data+0x53/0x5c [] pcmcia_device_probe+0xa6/0xf6 [] driver_probe_device+0xb5/0x12c [] __device_attach+0x0/0x5 [] bus_for_each_drv+0x36/0x5e [] device_attach+0x4e/0x5e [] __device_attach+0x0/0x5 [] bus_attach_device+0x1e/0x46 [] device_add+0x310/0x43d [] pcmcia_device_add+0x188/0x1eb [] pcmcia_delayed_add_device+0x0/0x23 [] pcmcia_delayed_add_device+0x1a/0x23 [] run_workqueue+0x6b/0xe0 [] worker_thread+0x0/0xbd [] worker_thread+0xb3/0xbd [] autoremove_wake_function+0x0/0x2d [] kthread+0x38/0x5e [] kthread+0x0/0x5e [] kernel_thread_helper+0x7/0x10 ======================= 0.1: GetNextTuple: No more items pata_pcmcia 0.1: XXX LEAVE -12 pata_pcmcia: probe of 0.1 failed with error -12 modprobe used greatest stack depth: 1676 bytes left pata_pcmcia 0.1: XXX ENTER Pid: 1661, comm: sh Not tainted 2.6.26-rc5 #3 [] pcmcia_init_one+0x34/0x585 [pata_pcmcia] [] pccard_get_tuple_data+0x53/0x5c [] iput+0x2a/0x4a [] pcmcia_device_probe+0xa6/0xf6 [] bus_register_notifier+0x2/0xb [] bus_rescan_devices_helper+0x0/0x44 [] driver_probe_device+0xb5/0x12c [] __device_attach+0x0/0x5 [] bus_for_each_drv+0x36/0x5e [] device_attach+0x4e/0x5e [] __device_attach+0x0/0x5 [] bus_rescan_devices_helper+0x27/0x44 [] bus_for_each_dev+0x37/0x59 [] bus_rescan_devices+0xe/0x10 [] bus_rescan_devices_helper+0x0/0x44 [] pcmcia_store_allow_func_id_match+0x46/0x5b [] pcmcia_store_allow_func_id_match+0x0/0x5b [] dev_attr_store+0x19/0x1d [] sysfs_write_file+0xa4/0xd8 [] sysfs_write_file+0x0/0xd8 [] vfs_write+0x83/0x114 [] sys_write+0x3c/0x63 [] sysenter_past_esp+0x6a/0x91 ======================= 0.1: GetNextTuple: No more items pata_pcmcia 0.1: XXX LEAVE -12 pata_pcmcia: probe of 0.1 failed with error -12 Best Regards Komuro > > > > Here is the log (your patch is applied). > > Unfortunately, no message that you added appears. > > > > It seems this device is detected as pcmcia0.0 first > > but later it is detected as pcmcia0.1. > > Hmmm... strange. Can you please try the attached patch? > > -- > tejun > -- Komuro