From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 10/70] riscom8: remove bogus checks
Date: Fri, 20 Jun 2008 20:59:29 +0100 [thread overview]
Message-ID: <20080620195928.1479.84621.stgit@localhost.localdomain> (raw)
In-Reply-To: <20080620195406.1479.12620.stgit@localhost.localdomain>
From: Alan Cox <alan@redhat.com>
Chris Malley posted a patch removing a NULL check in the riscom8 driver.
Further analysis shows that even more of the tests are irrelevant so we
can delete lots of stuff
Signed-off-by: Alan Cox <alan@redhat.com>
---
drivers/char/riscom8.c | 32 ++++++++------------------------
1 files changed, 8 insertions(+), 24 deletions(-)
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index b0ba241..3ca8957 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -638,9 +638,6 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
unsigned char cor1 = 0, cor3 = 0;
unsigned char mcor1 = 0, mcor2 = 0;
- if (tty == NULL || tty->termios == NULL)
- return;
-
port->IER = 0;
port->COR2 = 0;
port->MSVR = MSVR_RTS;
@@ -794,8 +791,7 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
spin_lock_irqsave(&riscom_lock, flags);
- if (port->port.tty)
- clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
if (port->port.count == 1)
bp->count++;
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
@@ -807,10 +803,9 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
}
/* Must be called with interrupts disabled */
-static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
+static void rc_shutdown_port(struct tty_struct *tty,
+ struct riscom_board *bp, struct riscom_port *port)
{
- struct tty_struct *tty;
-
if (!(port->port.flags & ASYNC_INITIALIZED))
return;
@@ -830,10 +825,7 @@ static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
}
#endif
tty_port_free_xmit_buf(&port->port);
-
- tty = port->port.tty;
-
- if (tty == NULL || C_HUPCL(tty)) {
+ if (C_HUPCL(tty)) {
/* Drop DTR */
bp->DTR |= (1u << port_No(port));
rc_out(bp, RC_DTR, bp->DTR);
@@ -848,8 +840,7 @@ static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
port->IER = 0;
rc_out(bp, CD180_IER, port->IER);
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
port->port.flags &= ~ASYNC_INITIALIZED;
if (--bp->count < 0) {
@@ -1067,7 +1058,7 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
break;
}
}
- rc_shutdown_port(bp, port);
+ rc_shutdown_port(tty, bp, port);
rc_flush_buffer(tty);
tty_ldisc_flush(tty);
@@ -1098,9 +1089,6 @@ static int rc_write(struct tty_struct *tty,
bp = port_Board(port);
- if (!tty || !port->port.xmit_buf)
- return 0;
-
while (1) {
spin_lock_irqsave(&riscom_lock, flags);
@@ -1141,9 +1129,6 @@ static int rc_put_char(struct tty_struct *tty, unsigned char ch)
if (rc_paranoia_check(port, tty->name, "rc_put_char"))
return 0;
- if (!tty || !port->port.xmit_buf)
- return 0;
-
spin_lock_irqsave(&riscom_lock, flags);
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
@@ -1167,8 +1152,7 @@ static void rc_flush_chars(struct tty_struct *tty)
if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
return;
- if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !port->port.xmit_buf)
+ if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped)
return;
spin_lock_irqsave(&riscom_lock, flags);
@@ -1488,7 +1472,7 @@ static void rc_hangup(struct tty_struct *tty)
bp = port_Board(port);
- rc_shutdown_port(bp, port);
+ rc_shutdown_port(tty, bp, port);
port->port.count = 0;
port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
port->port.tty = NULL;
next prev parent reply other threads:[~2008-06-20 20:19 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-20 19:57 [PATCH 00/70] tty updates proposed for 2.6.27 Alan Cox
2008-06-20 19:58 ` [PATCH 01/70] tty: Ldisc revamp Alan Cox
2008-06-23 13:39 ` Louis Rilling
2008-06-23 14:11 ` Alan Cox
2008-06-20 19:58 ` [PATCH 02/70] drivers/char/rio/: remove VCS tags Alan Cox
2008-06-20 19:58 ` [PATCH 03/70] drivers/serial/: remove CVS keywords Alan Cox
2008-06-20 19:58 ` [PATCH 04/70] tty: Introduce a tty_port common structure Alan Cox
2008-06-20 19:58 ` [PATCH 05/70] tty.h: clean up Alan Cox
2008-06-20 19:59 ` [PATCH 06/70] epca: use tty_port Alan Cox
2008-06-20 19:59 ` [PATCH 07/70] esp: " Alan Cox
2008-06-20 19:59 ` [PATCH 08/70] gs: " Alan Cox
2008-06-20 19:59 ` [PATCH 09/70] riscom8: " Alan Cox
2008-06-20 19:59 ` Alan Cox [this message]
2008-06-20 19:59 ` [PATCH 11/70] isicom: " Alan Cox
2008-06-20 19:59 ` [PATCH 12/70] istallion: " Alan Cox
2008-06-20 19:59 ` [PATCH 13/70] moxa: " Alan Cox
2008-06-20 19:59 ` [PATCH 14/70] mxser: " Alan Cox
2008-06-20 20:00 ` [PATCH 15/70] rocket: " Alan Cox
2008-06-20 20:00 ` [PATCH 16/70] serial: " Alan Cox
2008-06-20 20:00 ` [PATCH 17/70] stallion: " Alan Cox
2008-06-20 20:00 ` [PATCH 18/70] synclink: " Alan Cox
2008-06-20 20:00 ` [PATCH 19/70] tty: Clean up tiocmset Alan Cox
2008-06-20 20:00 ` [PATCH 20/70] cyclades: use tty_port Alan Cox
2008-06-20 20:00 ` [PATCH 21/70] termios: Termios defines for other platforms Alan Cox
2008-06-20 20:00 ` [PATCH 22/70] tty: add more tty_port fields Alan Cox
2008-06-20 20:01 ` [PATCH 24/70] whiteheat: coding style Alan Cox
2008-06-20 20:01 ` [PATCH 25/70] whiteheat: fix bugs found in the tidy and audit Alan Cox
2008-06-20 20:01 ` [PATCH 26/70] belkin_sa: clean up code Alan Cox
2008-06-20 20:01 ` [PATCH 27/70] usb-serial-bus: tidy coding style Alan Cox
2008-06-20 20:01 ` [PATCH 28/70] tty-usb-console: tidy the USB console code Alan Cox
2008-06-20 20:01 ` [PATCH 29/70] tty-usb-console: Fix termios Alan Cox
2008-06-20 20:02 ` [PATCH 30/70] cp2101: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 31/70] cyberjack: Coding style Alan Cox
2008-06-20 20:02 ` [PATCH 32/70] cypress_m8: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 33/70] usb-cypress: There is no 0 case to go with CS5/6/7/8 so remove the test Alan Cox
2008-06-20 20:02 ` [PATCH 34/70] digi_acceleport: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 35/70] empeg: Coding style Alan Cox
2008-06-20 20:02 ` [PATCH 36/70] ftdi_sio: " Alan Cox
2008-06-20 20:02 ` [PATCH 37/70] funsoft: Switch to linux/uaccess Alan Cox
2008-06-20 20:03 ` [PATCH 38/70] garmin_gps: Coding style Alan Cox
2008-06-20 20:03 ` [PATCH 39/70] tty-usb-generic: Code cleanup Alan Cox
2008-06-20 20:03 ` [PATCH 40/70] tty-usb-hp4x: Fix overlong line Alan Cox
2008-06-20 20:03 ` [PATCH 41/70] tty-usb-visor: Coding style Alan Cox
2008-06-20 20:03 ` [PATCH 42/70] tty-usb-io_edgeport: " Alan Cox
2008-06-20 20:03 ` [PATCH 43/70] io_edgeport: Fix various bogus returns to the tty layer Alan Cox
2008-06-20 20:03 ` [PATCH 44/70] usb-serial: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 45/70] io_ti: Minor coding style Alan Cox
2008-06-20 20:04 ` [PATCH 46/70] ipaq: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 47/70] tty-usb-ipw: " Alan Cox
2008-06-20 20:04 ` [PATCH 48/70] tty-usb-ir-usb: Clean up to coding style Alan Cox
2008-06-20 20:04 ` [PATCH 49/70] tty-usb-iuu-phoenix: " Alan Cox
2008-06-20 20:04 ` [PATCH 50/70] tty-usb-keyspan: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 51/70] keyspan: Use string flip functions when possible Alan Cox
2008-06-20 20:04 ` [PATCH 52/70] tty-usb-keyspan-pda: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 53/70] tty-usb-kl5kusb105: " Alan Cox
2008-06-20 20:05 ` [PATCH 54/70] keyspan_pda: Use string flip functions Alan Cox
2008-06-20 20:05 ` [PATCH 55/70] tty-usb-kobil-sct: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 56/70] kobil_sct: Fix ioctls Alan Cox
2008-06-20 20:05 ` [PATCH 57/70] tty-usb-mct-u232: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 58/70] mct_u232: Use flip buffer functions Alan Cox
2008-06-20 20:06 ` [PATCH 59/70] tty-usb-pl2303: Coding style Alan Cox
2008-06-20 20:06 ` [PATCH 60/70] tty-usb-sierra: Coding style - minor Alan Cox
2008-06-20 20:06 ` [PATCH 61/70] tty-usb-spcp8x5: Minor coding style Alan Cox
2008-06-20 20:06 ` [PATCH 62/70] tty-usb-ti-usb: Coding style Alan Cox
2008-06-20 20:06 ` [PATCH 63/70] tty-usb-safe-serial: " Alan Cox
2008-06-20 20:06 ` [PATCH 64/70] tty-usb-oti6858: " Alan Cox
2008-06-20 20:06 ` [PATCH 65/70] tty-usb-option: " Alan Cox
2008-06-20 20:06 ` [PATCH 66/70] tty-usb-omninet: " Alan Cox
2008-06-20 20:07 ` [PATCH 67/70] omninet: Use string flip functions Alan Cox
2008-06-20 20:07 ` [PATCH 68/70] mos7840: remove loads of bogus assignments to status Alan Cox
2008-06-20 20:07 ` [PATCH 69/70] whiteheat: remove unused variable Alan Cox
2008-06-20 20:07 ` [PATCH 70/70] tty-usb-mos7720: Coding style Alan Cox
2008-06-20 23:39 ` [PATCH 00/70] tty updates proposed for 2.6.27 Johannes Weiner
2008-06-21 9:09 ` Greg KH
2008-06-21 10:17 ` (Resend of 23/70 plus reply [PATCH 00/70] tty updates proposed for 2.6.27) Alan Cox
2008-06-21 11:19 ` Adrian Bunk
2008-06-22 17:07 ` Alan Cox
2008-06-22 18:39 ` Greg KH
2008-06-21 13:23 ` [PATCH 00/70] tty updates proposed for 2.6.27 Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080620195928.1479.84621.stgit@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®