From: Daniel Ritz <daniel.ritz-ml@swissonline.ch>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Alastair Bridgewater <nyef_sbcl@lisphacker.com>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: Re: [PATCH] input: Add support for eGalax TouchKit USB touchscreen used on HP tx1305us
Date: Tue, 1 Jul 2008 21:49:55 +0200 [thread overview]
Message-ID: <200807012149.56351.daniel.ritz-ml@swissonline.ch> (raw)
In-Reply-To: <20080630162327.ZZRA012@mailhub.coreip.homeip.net>
On Monday 30 June 2008 22:24:09 Dmitry Torokhov wrote:
> On Mon, Jun 30, 2008 at 10:18:36PM +0200, Daniel Ritz wrote:
> > On Monday 30 June 2008 17:23:35 Dmitry Torokhov wrote:
> > > Hi Alastair,
> > >
> > > On Sat, Jun 28, 2008 at 02:18:24PM -0400, Alastair Bridgewater wrote:
> > > > bInterfaceClass 3 Human Interface Devices
> > > > bInterfaceSubClass 1 Boot Interface Subclass
> > > > bInterfaceProtocol 2 Mouse
> > >
> > > I think we can try to make usbtouchscreen ignore eGalaxes with
> > > interface class set to HID?
> > >
> >
> > yeah, i was thinking of that too...something like the attached?
> > it's completely untested, so no signed-off-by yet...
> >
>
> Yeah, that looks nice. If both you guys could test it it'd be grand.
>
ok, i got around testing the patch with my non-HID screen. it still works.
so from my side it's ok...attached the patch with the signed-off-by line
for your patch queue...
rgds
-daniel
----
[PATCH] usbtouchscreen: ignore newer eGalax screens with HID protocol
The newer versions of the eGalax/EETI screen implement the HID protocol.
The device IDs are still the same, but the USB interface descriptor shows
the device being of HID class. Change usbtouchscreen to ignore the HID
models as they are handled by usbhid.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 3a0a8ca..4736262 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -49,6 +49,7 @@
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
+#include <linux/hid.h>
#define DRIVER_VERSION "v0.6"
@@ -101,7 +102,7 @@ struct usbtouch_usb {
/* device types */
enum {
- DEVTPYE_DUMMY = -1,
+ DEVTYPE_IGNORE = -1,
DEVTYPE_EGALAX,
DEVTYPE_PANJIT,
DEVTYPE_3M,
@@ -115,8 +116,21 @@ enum {
DEVTYPE_GOTOP,
};
+#define USB_DEVICE_HID_CLASS(vend, prod) \
+ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+ | USB_DEVICE_ID_MATCH_DEVICE, \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .bInterfaceClass = USB_INTERFACE_CLASS_HID, \
+ .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE
+
static struct usb_device_id usbtouch_devices[] = {
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
+ /* ignore the HID capable devices, handled by usbhid */
+ {USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE},
+ {USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE},
+
+ /* normal device IDs */
{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
@@ -857,6 +871,10 @@ static int usbtouch_probe(struct usb_interface *intf,
struct usbtouch_device_info *type;
int err = -ENOMEM;
+ /* some devices are ignored */
+ if (id->driver_info == DEVTYPE_IGNORE)
+ return -ENODEV;
+
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
next prev parent reply other threads:[~2008-07-01 19:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-28 15:19 Daniel Ritz
2008-06-28 15:57 ` Daniel Ritz
2008-06-28 18:18 ` Alastair Bridgewater
2008-06-30 15:23 ` Dmitry Torokhov
2008-06-30 20:18 ` Daniel Ritz
2008-06-30 20:24 ` Dmitry Torokhov
2008-07-01 19:49 ` Daniel Ritz [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-06-28 1:36 Alastair Bridgewater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200807012149.56351.daniel.ritz-ml@swissonline.ch \
--to=daniel.ritz-ml@swissonline.ch \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nyef_sbcl@lisphacker.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®