mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: Ondrej Zary <linux@rainbow-software.org>
Cc: alan@redhat.com, LKML <linux-kernel@vger.kernel.org>,
	linux-ide@vger.kernel.org
Subject: Re: pata_it821x completely broken
Date: Fri, 4 Jul 2008 21:22:04 +0100	[thread overview]
Message-ID: <20080704212204.7c94ca7c@lxorguk.ukuu.org.uk> (raw)
In-Reply-To: <200807042153.56644.linux@rainbow-software.org>

> When I don't have any RAID array created, both drives are detected but it 
> appears to work only in MWDMA2 mode:

The speed is meaningless in hardware RAID mode. Its also btw usually
faster (except for some cases of RAID1 with high PCI bus utilisation like
video capture boxes) in non RAID mode ;)

> ata3: PATA max MWDMA2 cmd 0x6800 ctl 0x6c00 bmdma 0x7800 irq 11
> ata4: PATA max MWDMA2 cmd 0x7000 ctl 0x7400 bmdma 0x7808 irq 11

I'll have a poke at that, see if I can make it lie more meaningfully

> ata4.00: configured for DMA

as it does here.

> Also I get some errors about HPA when rebooting but haven't captured them yet. 

IT821x does not support the HPA in 'raid' mode, only in non RAID mode so
it would complain about the HPA.


> But the more interesting thing is that once I create a RAID1 array (and run 
> background rebuild), the driver does not work anymore:

Ok that is a bug I've not met. What firmware revision is this and does it
work after the rebuild is done ?

> ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_masl=0x80)
> ata3: failed to recover some devices, retrying in 5 secs
> ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_masl=0x80)
> ata3: failed to recover some devices, retrying in 5 secs
> ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_masl=0x80)
> ata3: failed to recover some devices, retrying in 5 secs

It seems to have decided to be indefinitely busy from that.

Alan

  reply	other threads:[~2008-07-04 20:42 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-04 19:53 Ondrej Zary
2008-07-04 20:22 ` Alan Cox [this message]
2008-07-04 21:39   ` Ondrej Zary
2008-07-04 21:46     ` Alan Cox
2008-07-05 10:41       ` Ondrej Zary
2008-07-05 15:49         ` Alan Cox
2008-07-06 21:03           ` Ondrej Zary
2008-07-06 20:51             ` Alan Cox
2008-07-06 21:46               ` Ondrej Zary
2008-07-06 19:37         ` Alan Cox
2008-07-06 21:50           ` Ondrej Zary
2008-07-06 23:01             ` Alan Cox
2008-07-07 18:07               ` Ondrej Zary
2008-07-10 20:35               ` Ondrej Zary
2008-07-11 18:43                 ` Ondrej Zary
2008-07-11 20:14                   ` Alan Cox
2008-07-12 21:42                     ` Ondrej Zary
2008-07-13 11:47                       ` Ondrej Zary
2008-07-13 11:35                         ` Alan Cox
2008-07-13 12:10                           ` Ondrej Zary
2008-07-13 14:08                             ` Alan Cox
2008-07-22 17:59                         ` Ondrej Zary
2008-07-22 18:10                           ` Alan Cox
2008-07-22 19:16                             ` Ondrej Zary
2008-07-22 19:35                               ` Rene Herman
2008-07-22 20:39                                 ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080704212204.7c94ca7c@lxorguk.ukuu.org.uk \
    --to=alan@lxorguk.ukuu.org.uk \
    --cc=alan@redhat.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rainbow-software.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®