From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758519AbYGPSsS (ORCPT ); Wed, 16 Jul 2008 14:48:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753885AbYGPSsK (ORCPT ); Wed, 16 Jul 2008 14:48:10 -0400 Received: from cable-85.28.84.48.coditel.net ([85.28.84.48]:42514 "EHLO ibiza.bxl.tuxicoman.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753762AbYGPSsJ (ORCPT ); Wed, 16 Jul 2008 14:48:09 -0400 Date: Wed, 16 Jul 2008 20:45:52 +0200 From: Guy Martin To: linux-kernel@vger.kernel.org Subject: 64bit kernel not booting with CONFIG_PRINTK_TIME=y Message-ID: <20080716204552.56270e7c@tuxicoman.be> X-Mailer: Claws Mail 3.4.0 (GTK+ 2.12.9; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi all, I've been trying several times to boot a 64bit kernel with CONFIG_PRINTK_TIME=y and each time it failed. This is the output of my L2000 when trying to do so : Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial). Command line for kernel: 'root=/dev/md1 console=ttyS0 palo_kernel=2/vmlinux' Selected kernel: /vmlinux from partition 2 ELF64 executable Entry 00100000 first 00100000 n 2 Segment 0 load 00100000 size 4997120 mediaptr 0x1000 Segment 1 load 00634000 size 640576 mediaptr 0x4c5000 Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org ************* SYSTEM ALERT ************** SYSTEM NAME: uninitialized DATE: 07/16/2008 TIME: 17:47:39 ALERT LEVEL: 7 = reserved REASON FOR ALERT SOURCE: 0 = unknown, no source stated SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: FF PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH OFF ON ON LED State: Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. 0x0000007000FF6292 000000F0 F0000000 - type 0 = Data Field Unused 0x5800087000FF6292 00006C06 10112F27 - type 11 = Timestamp 07/16/2008 17:47:39 A: ack read of this entry - X: Disable all future alert messages Anything else skip redisplay the log entry ->Choice:Timeout! ***************************************** Recompiling with CONFIG_PRINTK_TIME=n makes it works straight away. How can this be troubleshooted ? Any idea what the problem could be ? I'm using gcc-4.2.4 with kernel 2.6.26 but I've have had very same results with gcc-4.1.2 and 2.6.25. Cheers, Guy -- Guy Martin Gentoo Linux - HPPA port lead