Re: [PATCH 1/3] at91_mci: Enable MMC_CAP_SDIO_IRQ only when it actually works

[Pierre Ossman <drzeus@drzeus.cx>]

[-- Attachment #1: Type: text/plain, Size: 1093 bytes --]

On Fri, 18 Jul 2008 15:30:40 +0200
Nicolas Ferre <nicolas.ferre@atmel.com> wrote:

> Pierre Ossman :
> > 
> > Not all SDIO cards use 4-bit mode, so it looks to me like you have to
> > disable it completely (unless there's a third revision where it works
> > without any fine print?).
> 
> Well, I understand.
> 
> In your opinion, a printed warning that says to be sure to use only 
> 4-bit mode SDIO cards on slot B... is not acceptable ?
> 

It's not really up to the user. The SDIO spec does not mandate 4-bit
support, so some cards will not have it.

> It kind of disappoints me to remove this feature as the 
> at91sam9260ek/9xe/9g20 board uses only slot B, and I really like to 
> connect SDIO with IRQ on it.
> 

I haven't seen the erratum, but is there no way to poke the hardware
into getting the interrupt running even in 1-bit mode?

-- 
     -- Pierre Ossman

  WARNING: This correspondence is being monitored by the
  Swedish government. Make sure your server uses encryption
  for SMTP traffic and consider using PGP for end-to-end
  encryption.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 197 bytes --]