From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Alan Stern <stern@rowland.harvard.edu>,
linux-usb@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"Greg Kroah-Hartman" <gregkh@suse.de>
Subject: Re: 2.6.27-rc4: 90% system time because of khubd, unable to reboot
Date: Fri, 22 Aug 2008 20:29:49 +0200 [thread overview]
Message-ID: <200808222029.50134.rjw@sisk.pl> (raw)
In-Reply-To: <200808222157.29299.arvidjaar@mail.ru>
On Friday, 22 of August 2008, Andrey Borzenkov wrote:
> On Friday 22 August 2008, Alan Stern wrote:
> > On Fri, 22 Aug 2008, Andrey Borzenkov wrote:
> >
> > > > > reverting 38b375d9610e2467cb793a84d17c6f65e44cdb39 fixed it
> > > > >
> > > >
> > > > ... that is:
> > > >
> > > > commit 38b375d9610e2467cb793a84d17c6f65e44cdb39
> > > > Author: Alan Stern <stern@rowland.harvard.edu>
> > > > Date: Mon Jul 21 09:56:26 2008 -0400
> > > >
> > > > USB: OHCI: fix system hang caused by earlier patch
> > > >
> > > > Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
> > > > Tested by: Andrey Borzenkov <arvidjaar@mail.ru>
> > > > Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> > > >
> > > > so it apparently used to work for you at that time. What gives?
> > > >
> > >
> > > Well, you should not commit a fix without commiting code that has been
> > > fixed first :)
> >
> > Actually the code to be fixed _was_ committed first -- but then it was
> > reverted before the fix was accepted, so the fix was merged without it.
> >
> > My advice is not to worry about it. That code has been sent once again
> > to Linus -- it's not merged yet but presumably it will be soon.
> > Certainly before 2.6.27-rc5 appears.
> >
> > On the other hand, I still have to wonder how the fix could have caused
> > your problem without the original patch in place. The fix itself
> > should have been totally innocuous.
> >
>
> It looks even funnier. Right now I am running with commits
> 38b375d9610e2467cb793a84d17c6f65e44cdb39 *and*
> e872154921a6b5256a3c412dd69158ac0b135176 reverted. I.e. this should be
> the state which hopelessly failed in 2.6.26-rc. It seems to be doing
> quite well now in 2.6.27-rc.
>
> "git revert e872154921a6b5256a3c412dd69158ac0b135176" gives me this
> one liner patch:
>
> commit f3cf9ad86ee76077d1c6be9af7d197aa13ccdff9
> Author: Andrey Borzenkov <arvidjaar@mail.ru>
> Date: Fri Aug 22 21:15:26 2008 +0400
>
> Revert "USB: don't explicitly reenable root-hub status interrupts"
>
> This reverts commit e872154921a6b5256a3c412dd69158ac0b135176.
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 107e1d2..d30f822 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -3086,6 +3086,11 @@ static void hub_events(void)
> if (!hdev->parent && !hub->busy_bits[0])
> usb_enable_root_hub_irq(hdev->bus);
>
> + /* If this is a root hub, tell the HCD it's okay to
> + * re-enable port-change interrupts now. */
> + if (!hdev->parent && !hub->busy_bits[0])
> + usb_enable_root_hub_irq(hdev->bus);
> +
> loop_autopm:
> /* Allow autosuspend if we're not going to run again */
> if (list_empty(&hub->event_list))
>
> Either my git tree is completely botched or most parts were already reverted
> before.
>
> So the problem seems to have cured by itself between 2.6.26 and 2.6.27?
Well, such things happened in the past.
I won't add this to the list of regressions for now, but please monitor the
status of -rc5 and let me know if the problem reappears in there.
Thanks,
Rafael
prev parent reply other threads:[~2008-08-22 18:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-22 16:26 Andrey Borzenkov
2008-08-22 16:53 ` Andrey Borzenkov
2008-08-22 17:04 ` Rafael J. Wysocki
2008-08-22 17:09 ` Andrey Borzenkov
2008-08-22 17:39 ` Alan Stern
2008-08-22 17:57 ` Andrey Borzenkov
2008-08-22 18:25 ` Alan Stern
2008-08-23 6:27 ` Andrey Borzenkov
2008-08-23 18:30 ` Alan Stern
2008-08-22 18:29 ` Rafael J. Wysocki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200808222029.50134.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=arvidjaar@mail.ru \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®