Hi Thomas, I have a HP Pavilion dv6000 laptop here which doesn't boot with latest Linus tree (2.6.27-rc5). The last lines I see on the screen are: """ hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25 000000 Hz """ Sometimes it also writes one more line: """ ACPI: rtc can wake from S4 """ By investigating this I have found that it: o boots with 2.6.26.3 o doesn't boot with 2.6.27-rc1 o 2.6.27-rc1 and current kernel boots if I pass hpet=disable at the command-line Then I bisected and git says that the culprit is: """ commit aa276e1cafb3ce9d01d1e837bcd67e92616013ac Author: Thomas Gleixner Date: Mon Jun 9 19:15:00 2008 +0200 x86, clockevents: add C1E aware idle function C1E on AMD machines is like C3 but without control from the OS. Up to now we disabled the local apic timer for those machines as it stops when the CPU goes into C1E. This excludes those machines from high resolution timers / dynamic ticks, which hurts especially X2 based laptops [...] """ Now, what puzzles me though is that if you do: $ git checkout -b bla aa276e1cafb3ce9d01d1e837bcd67e92616013ac and edit the Makefile you will see that it is a 2.6.26-rc4 kernel! When I saw this I thought 'wth? git bisect went backwards?' (I specified 2.6.26 as good and 2.6.27-rc1 as bad). I don't know if this is known (it should be) but it seems that you have changed the Makefile during the merge of that commit... But I'm quite sure that this commit has been introduced in 2.6.27-rc1. I would try to revert it from current Linus' tree to see if it really fix the problem but turns out that it will take some time to work on the conflicts. I'm attaching the 2.6.26.3 (Mandriva kernel) and 2.6.27-rc5 (with hpet=disable) dmesg files. Also, this _seems_ to be the same as reported in: http://bugzilla.kernel.org/show_bug.cgi?id=11191 But I'm still compiling the kernel with the appropriate config options to confirm this. Please, let me know if there's anything else I can do to help you debug this. Thanks. -- Luiz Fernando N. Capitulino