From: Randy Dunlap <randy.dunlap@oracle.com>
To: Mike Isely <isely@pobox.com>
Cc: Mike Isely <isely@isely.net>, Roland Dreier <rdreier@cisco.com>,
Hans Verkuil <hverkuil@xs4all.nl>,
LKML <linux-kernel@vger.kernel.org>,
v4l-dvb maintainer list <v4l-dvb-maintainer@linuxtv.org>
Subject: Re: CodingStyle question: multiple statements on a single line
Date: Tue, 2 Sep 2008 17:23:56 -0700 [thread overview]
Message-ID: <20080902172356.43d7b6fb.randy.dunlap@oracle.com> (raw)
In-Reply-To: <Pine.LNX.4.64.0809021830400.17907@cnc.isely.net>
On Tue, 2 Sep 2008 18:50:44 -0500 (CDT) Mike Isely wrote:
> On Tue, 2 Sep 2008, Roland Dreier wrote:
>
> > > 2) No, never use the 'if (a) b;' construction. Put 'b;' on the next line
> > > instead.
> >
> > This is correct. Always write simple if statements as
> >
> > if (a)
> > b;
>
> Going back to the text:
>
> <quote>
> Don't put multiple statements on a single line unless you have
> something to hide:
> </quote>
>
> Then what does "unless you have something to hide" refer to exactly?
IMO it means "don't do it". I.e., you/we shouldn't have anything to hide.
> <quote>
> if (condition) do_this;
> do_something_everytime;
> </quote>
>
> Realize that "if (condition) do_this;" is in fact one statement. The
> "if (condition)" part is not something that can stand on its own; it is
> a predicate which is not completed without the rest of the statement.
> I interpret the example to be showing what is correct, not what is
I disagree FWIW. It's a deliberate bad example AFAIK.
> disallowed. Both lines are single statements, each on their own line.
> I see the above as trying to illustrate outlawing of this sort of
> silliness:
>
> if (condition) do_this; do_something_everytime;
>
> which will compile and run but is obviously misleading.
>
> If anything the "do_this" is an example where one has something to hide,
> since it is not in the normal flow of execution (predicated instead by
> "if (condition)").
>
> If anything,
>
> if (condition) do_this;
>
> is safer than
>
> if (conditon)
> do_this;
>
> because while in both cases it's one statement, the second case is split
> in exactly the spot where somebody's later errant line of code (say, a
> debug printk) will completely change what is going on. With the whole
> statement on one line, this situation is avoided. Or perhaps
I suppose anyone can screw anything up. :(
>
> if (condition) {
> do_this;
> }
>
> is another way to avoid the same issue, but that seems frowned upon for
> other reasons (below).
>
> I know the answer to all this is just "but nobody does it that way".
> But my reading of the CodingStyle says this is allowed and that is what
> I thought was being asked - what does CodingStyle say?
>
>
> >
> > > And in general, why is this:
> > >
> > > if (a) {
> > > b;
> > > }
> > >
> > > not accepted by the CodingStyle? (At least as I understand it)
> >
> > The braces take up another line of whitespace, which means less code
> > fits on the screen. And in simple cases, they don't add anything.
> > Finally, the vast majority of the kernel leaves the braces off, so they
> > look funny to people who read a lot of kernel code.
>
> So by that reasoning "if (a) b;" - provided it stays under 80 columns -
> should be even better. It occupies less space so that more code can fit
> on the screen.
It's too close to hidden IMO.
> >
> > And uniformity counts for a lot: most coding style rules are completely
> > arbitrary, but having a uniform kernel style makes reading kernel code
> > much easier.
>
> What about drivers? The statement has been made by others that there is
> a strong desire for outside drivers to be brought into mainline rather
> than being out-of-tree. So must every chunk of code brought in this way
> be sanitized to this level of detail? In many cases that can be a large
> (and some might say arbitrary) hurdle.
It's not difficult. It's not a big hurdle.
> >
> > Keep in mind that common sense always trumps any mechanical rule. So if
> > there is some case where writing
> >
> > if (a) {
> > b;
> > }
> >
> > is clearly easier to read than leaving the braces off, then that would
> > be OK.
>
> That's great. How does one reconcile this statement with subsystem
> maintainers who treat checkpatch.pl - which is the epitome of
> "mechanical rule" and has no notion of common sense - as the gatekeeper
> for all incoming changesets?
Use a clue-by-four? The checkpatch.pl maintainers know that it is
just a tool. There are numerous exceptional cases.
Use common sense.
---
~Randy
Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA
http://linuxplumbersconf.org/
next prev parent reply other threads:[~2008-09-03 0:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-02 22:20 Hans Verkuil
2008-09-02 22:34 ` Roland Dreier
2008-09-02 23:50 ` Mike Isely
2008-09-03 0:23 ` Randy Dunlap [this message]
2008-09-03 12:19 ` Krzysztof Halasa
2008-09-03 18:38 ` Roland Dreier
2008-09-03 20:22 ` Lennart Sorensen
2008-09-03 12:15 ` Krzysztof Halasa
2008-09-03 6:57 ` Frans Meulenbroeks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080902172356.43d7b6fb.randy.dunlap@oracle.com \
--to=randy.dunlap@oracle.com \
--cc=hverkuil@xs4all.nl \
--cc=isely@isely.net \
--cc=isely@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rdreier@cisco.com \
--cc=v4l-dvb-maintainer@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome