From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754296AbYIEA2q (ORCPT ); Thu, 4 Sep 2008 20:28:46 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751543AbYIEA2g (ORCPT ); Thu, 4 Sep 2008 20:28:36 -0400 Received: from smtp1.linux-foundation.org ([140.211.169.13]:58282 "EHLO smtp1.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751166AbYIEA2d (ORCPT ); Thu, 4 Sep 2008 20:28:33 -0400 Date: Thu, 4 Sep 2008 17:28:22 -0700 From: Andrew Morton To: Edgar Kalkowski Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Takashi Iwai Subject: Re: PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset Message-Id: <20080904172822.e5390a59.akpm@linux-foundation.org> In-Reply-To: <48C069B1.3000201@edgar-kalkowski.de> References: <48C069B1.3000201@edgar-kalkowski.de> X-Mailer: Sylpheed version 2.2.4 (GTK+ 2.8.20; i486-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, 05 Sep 2008 01:05:21 +0200 Edgar Kalkowski wrote: > Dear kernel hackers. ;) > > [1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses. cc's added. Might be USB, might be ALSA. > [2.] Full description of the problem/report: > If I unplug the Logitech Headset, the kernel prints the following message to > /var/log/dmesg.log. I can unload the ehci module by executing "sudo rmmod > ehci_hcd" but "sudo rmmod uhci_hcd" blocks infinitely and thus I suppose the > Headset uses USB 1.1. "lsusb" shows the headset as > > Bus 002 Device 004: ID 046d:0a01 Logitech, Inc. USB Headset > > and I have no further information about the brand name or something. If I replug > the headset or any other usb device it is no longer recognized by the system. > I'm using a current arch linux install with KDE 4.1.1 on my Samsung R50 laptop. > The above data (except the oops message) was collected after a reboot with a > plugged in again and working headset. > > The oops does not occur every time I unplug the headset but so far I have not > been able to determine how to trigger the oops. I have tried to plug and unplug > it a few times after a fresh reboot with no programs running but KDE and after > four or five plugs and unplugs the kernel oopsed. > > I hope this bug report helps you guys a little and this bug get's fixed at some > time as it's quite annoying. ;) > > [3.] Keywords (i.e., modules, networking, kernel): usb, usbcore, uhci_hcd, > kernel, module, oops, crash > > [4.] Kernel version (from /proc/version): Linux version 2.6.26-ARCH > (root@T-POWA-LX) (gcc version 4.3.1 20080724 (prerelease) (GCC) ) #1 SMP PREEMPT > Tue Aug 26 21:15:43 UTC 2008 > > [5.] Output of Oops.. message (if applicable) with symbolic information > resolved (see Documentation/oops-tracing.txt) > > usb 3-1: USB disconnect, address 2 > BUG: unable to handle kernel paging request at 00100100 > IP: [] :snd:snd_ctl_dev_disconnect+0x5d/0x90 > *pde = 00000000 > Oops: 0000 [#1] PREEMPT SMP > Modules linked in: udf crc_itu_t michael_mic arc4 ecb ieee80211_crypt_tkip ipv6 > radeon drm ntfs sdhci mmc_core pcspkr yenta_socket rsrc_nonstatic serio_raw > psmouse ohci1394 ieee1394 i2c_i801 i2c_core snd_usb_audio snd_usb_lib > snd_rawmidi snd_hwdep usb_storage video output intel_agp agpgart sg thermal fan > button battery ac cpufreq_ondemand acpi_cpufreq freq_table processor > snd_intel8x0m joydev snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device evdev > usblp snd_intel8x0 usbhid hid ff_memless snd_ac97_codec snd_pcm_oss snd_pcm > snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211 > ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core > rtc_lib ext3 jbd mbcache sr_mod sd_mod cdrom uhci_hcd ehci_hcd usbcore ata_piix > ata_generic pata_acpi libata scsi_mod dock > > Pid: 764, comm: khubd Not tainted (2.6.26-ARCH #1) > EIP: 0060:[] EFLAGS: 00010282 CPU: 0 > EIP is at snd_ctl_dev_disconnect+0x5d/0x90 [snd] > EAX: 00000000 EBX: 00100100 ECX: 00020004 EDX: 0000001d > ESI: f70f0b70 EDI: f70f0a00 EBP: f70f0b4c ESP: f7063e30 > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 > Process khubd (pid: 764, ti=f7062000 task=f7bf87e0 task.ti=f7062000) > Stack: 00000000 f7b6a020 00000000 f70f0a00 f70f0b40 f8961e96 22222222 f7b6a020 > f8961eea 00000000 f70f0a00 f70f0b8c 00000000 f895e1b8 22222222 f7b5de00 > f7b5de00 f8b148c0 f7b952c0 f8b03c48 f70f0a00 f7b5de00 f8b148c0 f7b5de1c > Call Trace: > [] snd_device_disconnect+0x66/0x90 [snd] > [] snd_device_disconnect_all+0x2a/0x50 [snd] > [] snd_card_disconnect+0x148/0x1a0 [snd] > [] usb_audio_disconnect+0x58/0x140 [snd_usb_audio] > [] usb_unbind_interface+0x50/0xa0 [usbcore] > [] __device_release_driver+0x75/0xc0 > [] device_release_driver+0x20/0x40 > [] bus_remove_device+0x8a/0xc0 > [] device_del+0xef/0x150 > [] usb_disable_device+0x84/0xf0 [usbcore] > [] usb_disconnect+0xa0/0x140 [usbcore] > [] hub_thread+0x313/0x1170 [usbcore] > [] autoremove_wake_function+0x0/0x50 > [] hub_thread+0x0/0x1170 [usbcore] > [] kthread+0x39/0x70 > [] kthread+0x0/0x70 > [] kernel_thread_helper+0x7/0x14 > ======================= > Code: 18 b9 01 00 00 00 ba 03 00 00 00 c7 04 24 00 00 00 00 e8 c7 30 7c c7 8d 43 > 28 b9 04 0002 00 ba 1d 00 00 00 e8 a5 44 83 c7 8b 1b <8b> 03 0f 18 00 90 39 f3 > 75 c9 89 e8 e8 d2 3c 7e c7 89 fa 31 c0 > EIP: [] snd_ctl_dev_disconnect+0x5d/0x90 [snd] SS:ESP 0068:f7063e30 > - ---[ end trace 05aa0b5534340422 ]--- > > [6.] A small shell script or example program which triggers the > problem (if possible) > > [7.] Environment > [7.1.] Software (add the output of the ver_linux script here) > > If some fields are empty or look unusual you may have an old version. > > Compare to the current minimal requirements in Documentation/Changes. > > > > Linux HEX 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686 Intel(R) > Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux > > > > Gnu C 4.3.1 > > Gnu make 3.81 > > binutils 2.18.0.20080610 > > util-linux 2.14 > > mount support > > module-init-tools 3.4 > > e2fsprogs 1.40.8 > > jfsutils 1.1.12 > > reiserfsprogs 3.6.20 > > xfsprogs 2.9.8 > > pcmciautils 014 > > PPP 2.4.4 > > Linux C Library 2.8 > > Dynamic linker (ldd) 2.8 > > Linux C++ Library so.6.0 > > Procps 3.2.7 > > Net-tools 1.60 > > Kbd 1.13 > > Sh-utils 6.12 > > udev 119 > > wireless-tools 29 > > Modules Loaded michael_mic arc4 ecb ieee80211_crypt_tkip > cpufreq_ondemand snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep ipv6 radeon drm > ntfs joydev pcspkr serio_raw psmouse i2c_i801 i2c_core usblp sdhci ohci1394 > mmc_core ieee1394 yenta_socket rsrc_nonstatic usb_storage usbhid hid ff_memless > video output intel_agp agpgart sg thermal evdev fan button battery ac > acpi_cpufreq freq_table processor snd_intel8x0m snd_intel8x0 snd_ac97_codec > snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm > snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211 > ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core > rtc_lib ext3 jbd mbcache sr_mod cdrom sd_mod ehci_hcd uhci_hcd usbcore ata_piix > ata_generic pata_acpi libata scsi_mod dock > > [7.2.] Processor information (from /proc/cpuinfo): > > processor : 0 > > vendor_id : GenuineIntel > > cpu family : 6 > model : 13 > model name : Intel(R) Pentium(R) M processor 1.73GHz > stepping : 8 > cpu MHz : 1733.000 > cache size : 2048 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov > pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 > bogomips : 3462.30 > clflush size : 64 > power management: > > [7.3.] Module information (from /proc/modules): > > michael_mic 4224 4 - Live 0xf8c4d000 > arc4 3712 4 - Live 0xf8849000 > ecb 4608 4 - Live 0xf8b65000 > ieee80211_crypt_tkip 10752 2 - Live 0xf8c49000 > cpufreq_ondemand 8716 1 - Live 0xf8c3c000 > snd_usb_audio 81152 1 - Live 0xf94a0000 > snd_usb_lib 17024 1 snd_usb_audio, Live 0xf8c50000 > snd_rawmidi 21504 1 snd_usb_lib, Live 0xf8b16000 > snd_hwdep 8964 1 snd_usb_audio, Live 0xf8b39000 > ipv6 259684 63 - Live 0xf94d2000 > radeon 137248 2 - Live 0xf8c60000 > drm 73896 3 radeon, Live 0xf8b51000 > ntfs 221664 1 - Live 0xf8b6a000 > joydev 11584 0 - Live 0xf8b04000 > pcspkr 4352 0 - Live 0xf8b01000 > serio_raw 7044 0 - Live 0xf8acc000 > psmouse 38288 0 - Live 0xf8b1d000 > i2c_i801 10384 0 - Live 0xf8a93000 > i2c_core 21140 1 i2c_i801, Live 0xf8b09000 > usblp 13824 0 - Live 0xf8af0000 > sdhci 16388 0 - Live 0xf8a8d000 > ohci1394 30128 0 - Live 0xf8ae7000 > mmc_core 43036 1 sdhci, Live 0xf8af5000 > ieee1394 80696 1 ohci1394, Live 0xf8ab7000 > yenta_socket 24972 1 - Live 0xf8aaf000 > rsrc_nonstatic 12800 1 yenta_socket, Live 0xf8a88000 > usb_storage 90560 1 - Live 0xf8acf000 > usbhid 46016 0 - Live 0xf8aa2000 > hid 40960 1 usbhid, Live 0xf8a97000 > ff_memless 6664 1 usbhid, Live 0xf8a2b000 > video 18064 0 - Live 0xf8a82000 > output 4608 1 video, Live 0xf8a51000 > intel_agp 26428 0 - Live 0xf8a67000 > agpgart 29652 2 drm,intel_agp, Live 0xf8a79000 > sg 28596 0 - Live 0xf8a71000 > thermal 16796 0 - Live 0xf8a61000 > evdev 10880 10 - Live 0xf8a56000 > fan 6020 0 - Live 0xf8a2e000 > button 7824 0 - Live 0xf8a1c000 > battery 12036 0 - Live 0xf8a4d000 > ac 6020 0 - Live 0xf8a22000 > acpi_cpufreq 9228 0 - Live 0xf8a27000 > freq_table 5568 2 cpufreq_ondemand,acpi_cpufreq, Live 0xf8a1f000 > processor 33836 3 thermal,acpi_cpufreq, Live 0xf89a6000 > snd_intel8x0m 15500 0 - Live 0xf89cf000 > snd_intel8x0 30748 1 - Live 0xf8a13000 > snd_ac97_codec 99748 2 snd_intel8x0m,snd_intel8x0, Live 0xf8a33000 > snd_seq_oss 31872 0 - Live 0xf89b1000 > snd_seq_midi_event 8192 1 snd_seq_oss, Live 0xf897d000 > snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8a05000 > snd_seq_device 8332 3 snd_rawmidi,snd_seq_oss,snd_seq, Live 0xf8979000 > snd_pcm_oss 40192 0 - Live 0xf895b000 > snd_pcm 69636 5 > snd_usb_audio,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live > 0xf89bc000 > > snd_timer 21384 2 snd_seq,snd_pcm, Live 0xf8947000 > > snd_page_alloc 9608 3 snd_intel8x0m,snd_intel8x0,snd_pcm, Live 0xf8957000 > > snd_mixer_oss 16512 1 snd_pcm_oss, Live 0xf8916000 > > snd 50724 17 > snd_usb_audio,snd_rawmidi,snd_hwdep,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss, > Live 0xf8967000 > soundcore 8032 1 snd, Live 0xf8944000 > > ac97_bus 3584 1 snd_ac97_codec, Live 0xf8822000 > > ipw2200 142408 0 - Live 0xf8982000 > > ieee80211 31176 1 ipw2200, Live 0xf894e000 > > ieee80211_crypt 6532 2 ieee80211_crypt_tkip,ieee80211, Live 0xf88e4000 > > b44 26512 0 - Live 0xf893c000 > > ssb 39684 1 b44, Live 0xf88f6000 > > pcmcia 34476 1 ssb, Live 0xf890c000 > > pcmcia_core 34708 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia, Live 0xf8902000 > > firmware_class 9088 2 ipw2200,pcmcia, Live 0xf88dc000 > > mii 6528 1 b44, Live 0xf88d9000 > rtc_cmos 11424 0 - Live 0xf888c000 > rtc_core 17436 1 rtc_cmos, Live 0xf887c000 > rtc_lib 4480 1 rtc_core, Live 0xf8846000 > ext3 125704 3 - Live 0xf891c000 > jbd 45716 1 ext3, Live 0xf88e9000 > mbcache 8708 1 ext3, Live 0xf8842000 > sr_mod 16836 0 - Live 0xf8876000 > cdrom 36128 1 sr_mod, Live 0xf8882000 > sd_mod 25240 7 - Live 0xf886e000 > ehci_hcd 35596 0 - Live 0xf8864000 > uhci_hcd 23952 0 - Live 0xf8831000 > usbcore 132080 8 > snd_usb_audio,snd_usb_lib,usblp,usb_storage,usbhid,ehci_hcd,uhci_hcd, Live > 0xf88b7000 > ata_piix 17924 4 - Live 0xf8839000 > ata_generic 6788 0 - Live 0xf882e000 > pata_acpi 6016 0 - Live 0xf882b000 > libata 150048 3 ata_piix,ata_generic,pata_acpi, Live 0xf8891000 > scsi_mod 95692 5 usb_storage,sg,sr_mod,sd_mod,libata, Live 0xf884b000 > dock 9488 1 libata, Live 0xf8827000 > > [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) > > $ cat /proc/ioports > > 0000-001f : dma1 > > 0020-0021 : pic1 > > 0040-0043 : timer0 > > 0050-0053 : timer1 > > 0060-0060 : keyboard > > 0064-0064 : keyboard > > 0070-0077 : rtc0 > > 0080-008f : dma page reg > > 00a0-00a1 : pic2 > > 00c0-00df : dma2 > > 00f0-00ff : fpu > > 0170-0177 : 0000:00:1f.1 > > 0170-0177 : ata_piix > > 01f0-01f7 : 0000:00:1f.1 > > 01f0-01f7 : ata_piix > > 0376-0376 : 0000:00:1f.1 > > 0376-0376 : ata_piix > > 03c0-03df : vga+ > > 03f6-03f6 : 0000:00:1f.1 > > 03f6-03f6 : ata_piix > > 0680-06ff : pnp 00:06 > > 0800-080f : pnp 00:06 > > 0900-090f : pnp 00:06 > > 0cf8-0cff : PCI conf1 > > 1000-107f : 0000:00:1f.0 > > 1000-107f : pnp 00:06 > > 1000-1003 : ACPI PM1a_EVT_BLK > > 1004-1005 : ACPI PM1a_CNT_BLK > > 1008-100b : ACPI PM_TMR > > 1010-1015 : ACPI CPU throttle > > 1020-1020 : ACPI PM2_CNT_BLK > > 1028-102f : ACPI GPE0_BLK > > 1180-11bf : 0000:00:1f.0 > > 1180-11bf : pnp 00:06 > > 1640-164f : pnp 00:06 > > 1800-181f : 0000:00:1d.0 > > 1800-181f : uhci_hcd > > 1820-183f : 0000:00:1d.1 > > 1820-183f : uhci_hcd > > 1840-185f : 0000:00:1d.2 > > 1840-185f : uhci_hcd > > 1860-187f : 0000:00:1d.3 > 1860-187f : uhci_hcd > 1880-18bf : 0000:00:1e.2 > 1880-18bf : Intel ICH6 > 18c0-18cf : 0000:00:1f.1 > 18c0-18cf : ata_piix > 18e0-18ff : 0000:00:1f.3 > 18e0-18ff : i801_smbus > 1c00-1cff : 0000:00:1e.2 > 1c00-1cff : Intel ICH6 > 2000-207f : 0000:00:1e.3 > 2000-207f : Intel ICH6 Modem > 2400-24ff : 0000:00:1e.3 > 2400-24ff : Intel ICH6 Modem > 3000-3fff : PCI Bus 0000:01 > 3000-30ff : 0000:01:00.0 > 4000-4fff : PCI Bus 0000:02 > 5000-5fff : PCI Bus 0000:06 > 5000-50ff : PCI CardBus 0000:07 > 5400-54ff : PCI CardBus 0000:07 > > $ cat /proc/iomem > > 00000000-0009f7ff : System RAM > 0009f800-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000ce1ff : Video ROM > 000d0000-000d3fff : Adapter ROM > 000d4000-000d4fff : Adapter ROM > 000f0000-000fffff : System ROM > 00100000-3fe9ffff : System RAM > 00100000-0031211d : Kernel code > 0031211e-003cc37f : Kernel data > 00415000-004e527f : Kernel bss > 3fea0000-3feb0fff : ACPI Tables > 3feb1000-3fefffff : ACPI Non-volatile Storage > 3ff00000-3fffffff : reserved > 50000000-53ffffff : PCI CardBus 0000:07 > 54000000-543fffff : PCI CardBus 0000:07 > c0000000-c00003ff : 0000:00:1d.7 > c0000000-c00003ff : ehci_hcd > c0000400-c00004ff : 0000:00:1e.2 > c0000400-c00004ff : Intel ICH6 > c0000800-c00009ff : 0000:00:1e.2 > c0000800-c00009ff : Intel ICH6 > c0100000-c01fffff : PCI Bus 0000:01 > c0100000-c010ffff : 0000:01:00.0 > c0120000-c013ffff : 0000:01:00.0 > c4000000-c7ffffff : PCI Bus 0000:02 > c8000000-c80fffff : PCI Bus 0000:06 > c8000000-c8000fff : 0000:06:07.0 > c8000000-c8000fff : ipw2200 > c8001000-c80017ff : 0000:06:09.1 > c8001000-c80017ff : ohci1394 > c8001800-c80018ff : 0000:06:09.2 > c8001800-c80018ff : mmc0 > c8001c00-c8001cff : 0000:06:09.3 > c8002000-c80020ff : 0000:06:09.4 > c8003000-c8003fff : 0000:06:09.0 > c8003000-c8003fff : yenta_socket > c8004000-c8005fff : 0000:06:05.0 > c8004000-c8005fff : 0000:06:05.0 > d0000000-d7ffffff : PCI Bus 0000:01 > d0000000-d7ffffff : 0000:01:00.0 > d8000000-dbffffff : PCI Bus 0000:02 > e0000000-f0005fff : reserved > e0000000-efffffff : PCI MMCONFIG 0 > f0008000-f000bfff : reserved > fed00000-fed003ff : HPET 0 > fed00000-fed003ff : reserved > fed20000-fed8ffff : reserved > ff000000-ffffffff : reserved > > [7.5.] PCI information ('lspci -vvv' as root) > > 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express > Processor to DRAM Controller (rev 03) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0 > > Capabilities: [e0] Vendor Specific Information > > Kernel modules: intel-agp > > > 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root > Port (rev 03) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 32 bytes > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > > I/O behind bridge: 00003000-00003fff > > Memory behind bridge: c0100000-c01fffff > > Prefetchable memory behind bridge: d0000000-d7ffffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device b035 > > Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > Address: 00000000 Data: 0000 > > Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 > <1us > ExtTag- RBE- FLReset- > > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ > Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency > L0 <256ns, L1 <4us > > ClockPM- Suprise- LLActRep- BwNot- > > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surpise- > Slot # 1, PowerLimit 75.000000; Interlock- NoCompl- > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState- > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > Capabilities: [100] Virtual Channel > > Capabilities: [140] Root Complex Link > > Kernel driver in use: pcieport-driver > > Kernel modules: shpchp > > > 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI > Express Port 1 (rev 03) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 32 bytes > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > > I/O behind bridge: 00004000-00004fff > > Memory behind bridge: c4000000-c7ffffff > > Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > > ExtTag+ RBE- FLReset- > > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ > Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <1us, L1 <4us > > ClockPM- Suprise- LLActRep- BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ > Surpise+ > Slot # 2, PowerLimit 6.500000; Interlock- NoCompl- > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > Address: 00000000 Data: 0000 > > Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device b035 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [100] Virtual Channel > > Capabilities: [180] Root Complex Link > > Kernel driver in use: pcieport-driver > > Kernel modules: shpchp > > > 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Interrupt: pin A routed to IRQ 23 > > Region 4: I/O ports at 1800 [size=32] > > Kernel driver in use: uhci_hcd > > Kernel modules: uhci-hcd > > > 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > USB UHCI #2 (rev 03) (prog-if 00 [UHCI]) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Interrupt: pin B routed to IRQ 19 > > Region 4: I/O ports at 1820 [size=32] > > Kernel driver in use: uhci_hcd > > Kernel modules: uhci-hcd > > > 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > USB UHCI #3 (rev 03) (prog-if 00 [UHCI]) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Interrupt: pin C routed to IRQ 18 > > Region 4: I/O ports at 1840 [size=32] > > Kernel driver in use: uhci_hcd > > Kernel modules: uhci-hcd > > > 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > USB UHCI #4 (rev 03) (prog-if 00 [UHCI]) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Interrupt: pin D routed to IRQ 16 > > Region 4: I/O ports at 1860 [size=32] > > Kernel driver in use: uhci_hcd > > Kernel modules: uhci-hcd > > > 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Interrupt: pin A routed to IRQ 23 > > Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [58] Debug port: BAR=1 offset=00a0 > > Kernel driver in use: ehci_hcd > > Kernel modules: ehci-hcd > > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if > 01 [Subtractive decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0 > > Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 > > I/O behind bridge: 00005000-00005fff > > Memory behind bridge: c8000000-c80fffff > > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [50] Subsystem: Gammagraphx, Inc. Device 0000 > > > 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW > (ICH6 Family) AC'97 Audio Controller (rev 03) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Interrupt: pin A routed to IRQ 17 > > Region 0: I/O ports at 1c00 [size=256] > > Region 1: I/O ports at 1880 [size=64] > > Region 2: Memory at c0000800 (32-bit, non-prefetchable) [size=512] > > Region 3: Memory at c0000400 (32-bit, non-prefetchable) [size=256] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Kernel driver in use: Intel ICH > > Kernel modules: snd-intel8x0 > > > 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem > Controller (rev 03) (prog-if 00 [Generic]) > > Subsystem: Samsung Electronics Co Ltd Device 2115 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Interrupt: pin B routed to IRQ 20 > > Region 0: I/O ports at 2400 [size=256] > > Region 1: I/O ports at 2000 [size=128] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Kernel driver in use: Intel ICH Modem > > Kernel modules: snd-intel8x0m > > > 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) > Subsystem: Samsung Electronics Co Ltd Device b035 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Kernel modules: intel-rng > > > 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE > Controller (rev 03) (prog-if 8a [Master SecP PriP]) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 0 > > Interrupt: pin A routed to IRQ 18 > > Region 0: I/O ports at 01f0 [size=8] > > Region 1: I/O ports at 03f4 [size=1] > > Region 2: I/O ports at 0170 [size=8] > > Region 3: I/O ports at 0374 [size=1] > > Region 4: I/O ports at 18c0 [size=16] > > Kernel driver in use: ata_piix > > Kernel modules: ata_piix, piix > > > 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus > Controller (rev 03) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Interrupt: pin B routed to IRQ 19 > > Region 4: I/O ports at 18e0 [size=32] > > Kernel driver in use: i801_smbus > > Kernel modules: i2c-i801 > > > 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 > (PCIE) (prog-if 00 [VGA controller]) > > Subsystem: Samsung Electronics Co Ltd Device e003 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 32 bytes > > Interrupt: pin A routed to IRQ 16 > > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] > > Region 1: I/O ports at 3000 [size=256] > > Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K] > > [virtual] Expansion ROM at c0120000 [disabled] [size=128K] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [58] Express (v1) Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, > L1 <4us > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency > L0 <256ns, L1 <2us > > ClockPM- Suprise- LLActRep- BwNot- > > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > > Capabilities: [100] Advanced Error Reporting > > > 06:05.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) > Subsystem: Samsung Electronics Co Ltd Device b035 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 32 > > Interrupt: pin A routed to IRQ 22 > > Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=8K] > > Capabilities: [40] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > Kernel driver in use: b44 > > Kernel modules: b44 > > > 06:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network > Connection (rev 05) > Subsystem: Intel Corporation Samsung P35 integrated WLAN > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes > > Interrupt: pin A routed to IRQ 20 > > Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=4K] > > Capabilities: [dc] Power Management version 2 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > > Kernel driver in use: ipw2200 > > Kernel modules: ipw2200 > > > 06:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) > Subsystem: Samsung Electronics Co Ltd Device b035 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 168 > > Interrupt: pin A routed to IRQ 16 > > Region 0: Memory at c8003000 (32-bit, non-prefetchable) [size=4K] > > Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 > > Memory window 0: 54000000-543ff000 (prefetchable) > > Memory window 1: 50000000-53fff000 > > I/O window 0: 00005000-000050ff > > I/O window 1: 00005400-000054ff > > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ > > 16-bit legacy interface ports at 0001 > > Kernel driver in use: yenta_cardbus > > Kernel modules: yenta_socket > > > 06:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) > (prog-if 10 [OHCI]) > > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 64 (500ns min, 1000ns max) > > Interrupt: pin B routed to IRQ 17 > > Region 0: Memory at c8001000 (32-bit, non-prefetchable) [size=2K] > > Capabilities: [dc] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME+ > > Kernel driver in use: ohci1394 > > Kernel modules: ohci1394 > > > 06:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host > Adapter (rev 17) > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- > Latency: 32 > > Interrupt: pin C routed to IRQ 18 > > Region 0: Memory at c8001800 (32-bit, non-prefetchable) [size=256] > > Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > Kernel driver in use: sdhci > > Kernel modules: sdhci > > > 06:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter > (rev 08) > Subsystem: Samsung Electronics Co Ltd Device b035 > > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Interrupt: pin C routed to IRQ 255 > Region 0: Memory at c8001c00 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 06:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 03) > Subsystem: Samsung Electronics Co Ltd Device b035 > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Interrupt: pin C routed to IRQ 255 > Region 0: Memory at c8002000 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > [7.6.] SCSI information (from /proc/scsi/scsi) > > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: SAMSUNG HM120JC Rev: YL10 > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi0 Channel: 00 Id: 01 Lun: 00 > Vendor: TEAC Model: DV-W28EA Rev: S.0A > Type: CD-ROM ANSI SCSI revision: 05 > Host: scsi2 Channel: 00 Id: 00 Lun: 00 > Vendor: WDC WD25 Model: 00BB-00GUC0 Rev: 0811 > Type: Direct-Access ANSI SCSI revision: 00 > Host: scsi3 Channel: 00 Id: 00 Lun: 00 > Vendor: HDT72252 Model: 5DLAT80 Rev: V44O > Type: Direct-Access ANSI SCSI revision: 00 > > [7.7.] Other information that might be relevant to the problem > (please look in /proc and include all information that you > think to be relevant): > > I hope this helps you fix my problem. :) >