hi,Benny
    here is my kernel2.6.26.2 .config file; and both the CONFIG_MODVERSIONS and CONFIG_MODULE_FORCE_LOAD is not set.thanks!~



Bily
2008-09-18



发件人： Benny Halevy
发送时间： 2008-09-17 21:11:54
收件人： Bily
抄送： mal reddy y; linux-kernel
主题： Re: insmod problem

Can you please provide your .config file?
I'm mostly curious about
CONFIG_MODVERSIONS
CONFIG_MODULE_FORCE_LOAD

Benny

On Sep. 17, 2008, 3:27 -0500, "Bily"  <hsssss1111@163.com > wrote:
> I am installing the linux kernel 2.6.26.2 to my AT91rm9200;I compile the kernel by using cross compiler  arm-none-eabi-gcc (Sourcery G++ Lite 2008q1-126); and the kernel can run on AT91rm9200 normally;howerver if i want to insert modules into kernel ,it happen the mistake like this:
> 
> [\u@\h \W]$insmod yaffs.ko
> yaffs: unknown relocation: 40
> insmod: cannot insert 'yaffs.ko': invalid module format
> 
> thanks for help!~
> 
> 
> 
> 
> 
> Bily
> 2008-09-17
> 
> 
> 
> 发件人： mal reddy y
> 发送时间： 2008-09-17 16:19:52
> 收件人： Bily
> 抄送： linux-kernel
> 主题： Re: insmod problem
> 
> give clear explanation how you have installed
> 
> regards,
> YMR
> 
> On Tue, Sep 16, 2008 at 12:45 PM, Bily   <hsssss1111@163.com  > wrote:
> > hi,all;
> >    I want to insert an module:yaffs.ko into my kernel2.6.26,but i meet this question:
> >
> > [\u@\h \W]$insmod yaffs.ko
> > yaffs: unknown relocation: 40
> > insmod: cannot insert 'yaffs.ko': invalid module format
> >
> > and my busybox version is v1.11.1; may anyone tell me why ?thanks!
> >
> >
> > Bily
> > 2008-09-13
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >
> N嫥叉靣笡y氊b瞂千v豝�)藓{.n�+壏{睉赙zXФ洝塄}财爖�&j:+v墾�珣赙zZ+€�+zf＂穐殘啳嗃i�z�畐ア�?櫒璀�&�)撷f旟^j谦y呩@A玜囤�
0鹅h�鍜i