From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756521AbYJEWoa (ORCPT ); Sun, 5 Oct 2008 18:44:30 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755103AbYJEWoW (ORCPT ); Sun, 5 Oct 2008 18:44:22 -0400 Received: from nudl.linbit.com ([212.69.162.21]:59098 "EHLO mail.linbit.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754954AbYJEWoW convert rfc822-to-8bit (ORCPT ); Sun, 5 Oct 2008 18:44:22 -0400 X-Greylist: delayed 1820 seconds by postgrey-1.27 at vger.kernel.org; Sun, 05 Oct 2008 18:44:21 EDT Date: Mon, 6 Oct 2008 00:13:57 +0200 From: Martin Gerhard Loschwitz To: linux-kernel@vger.kernel.org Cc: kkeil@suse.de Subject: Linux 2.6.27-rc8 and hfcplus / mISDN detection problem Message-ID: <20081005221357.GA15296@madkiss.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: 8BIT User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi all, i'm happy to see that mISDN made it into the mainline kernel -- i just tried to use 2.6.27-rc8 with mISDN yesterday, and noticed that the hfcplus-module does no longer detect my beroNet HFC-4S ISDN card. The "old" mISDN just works flawlessly with that card. This is the lspci-output: 02:00.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Subsystem: Cologne Chip Designs GmbH Device b762 Flags: medium devsel, IRQ 169 I/O ports at 2000 [size=8] Memory at de100000 (32-bit, non-prefetchable) [disabled] [size=4K] Capabilities: [40] Power Management version 2 Kernel driver in use: hfc_multi Kernel modules: hfcmulti, ipmi_si With 2.6.18 and mISDN 1.1.8, the card gets detected without any problems: HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S Beronet Card PCIe' clock: double ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 HFC-4S#1: defined at IOBASE 0x2000 IRQ 169 HZ 250 leds-type 2 HFC_multi: resetting HFC with chip ID=0xc revision=1 hfcpci_probe: DIPs(0x8f) jumpers(0x0) 1 devices registered However, in 2.6.27-rc8, the kernel only tells me that I should "contact my vendor for a driver". I guess that maybe somewhen during the various cleanups, there was one PCI-ID too much removed, but I did not find out how to put it back in. Can somebody help me out with a patch, maybe, to re-active the support for this card? Please CC me in replies as I am not subscribed to the list. Thanks in advance Martin G. Loschwitz : Martin Loschwitz Tel +43-1-8178292-63 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Vivenotgasse 48, A-1120 Vienna/Europe http://www.linbit.com :