From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
To: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] markers: fix unchecked format
Date: Thu, 9 Oct 2008 09:46:06 -0400 [thread overview]
Message-ID: <20081009134606.GB15553@Krystal> (raw)
In-Reply-To: <48EC3F50.7050306@cn.fujitsu.com>
* Lai Jiangshan (laijs@cn.fujitsu.com) wrote:
>
> No.
>
> 1)
> In current code, when the second, third... probe is registered
> with the same marker name, its format is not checked.
>
> marker_probe_register("marker_name", "field1 %s", XXX);
> marker_probe_register("marker_name", "field1 %d", XXX);
>
> the second call, "field1 %d" is not check for ever.
> and this probe may cause kernel core-dump.
>
> because these two probes share the same marker_entry, and
> we do not check the format when they are being shared.
>
> if several probes share the same marker_entry we should
> make sure all these probes's format are the same.
>
Yep, you are right. Thanks for the explanation.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
> 2)
> set_marker() check marker's format with marker_entry's format
> my fix change marker_probe_register(),
> and marker_probe_register() check probes' format with marker_entry's format.
>
> they are not duplicate check.
>
> 3)
> my patch change marker_probe_register(), and this fix can not
> make the module load fail in an condition.
> for: marker_update_probe_range() return void.
>
> Thanks, Lai.
>
> Mathieu Desnoyers wrote:
> > * Lai Jiangshan (laijs@cn.fujitsu.com) wrote:
> >> when the second, third... probe is registered, its format is
> >> not checked, this patch fix it.
> >>
> >
> > It's already checked here :
> >
> > marker_update_probes
> > marker_update_probe_range
> > set_marker
> >
> > if ((*entry)->format) {
> > if (strcmp((*entry)->format, elem->format) != 0) {
> > printk(KERN_NOTICE
> > "Format mismatch for probe %s "
> > "(%s), marker (%s)\n",
> > (*entry)->name,
> > (*entry)->format,
> > elem->format);
> > return -EPERM;
> > }
> > } else {
> > ret = marker_set_format(entry, elem->format);
> > if (ret)
> > return ret;
> > }
> >
> > Given that marker_probe_register can be called to connect a probe to a
> > marker which does not exist yet (e.g. marker in a module not loaded), I
> > am not sure it makes sense to check for format string mismatch so early
> > in marker_probe_register (the moment it adds the marker to the hash
> > table). That's actually why I chose to leave it in later stage which
> > does the actual connection of the probes to the markers
> > (marker_update_probes).
> >
> > If you really want to check it earlier, how do you plan to deal with
> > this scenario ?
> >
> > 1 - a marker probe is registered for markerA with format string
> > "field1 %s"
> > 2 - a module is loaded, which contains a marker markerA with format
> > string "field1 %d"
> >
> > I think it would be _really_ bad to make the module load fail because of
> > a marker format string mismatch... this is why I chose just to give a
> > warning in set_marker, which is shown when the markers are updated,
> > which happens when the module is loaded and when the marker hash table
> > is modified.
> >
> > Mathieu
> >
> >> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
> >> ---
> >> diff --git a/kernel/marker.c b/kernel/marker.c
> >> index 4440a09..1196a6b 100644
> >> --- a/kernel/marker.c
> >> +++ b/kernel/marker.c
> >> @@ -651,11 +651,17 @@ int marker_probe_register(const char *name, const char *format,
> >> entry = get_marker(name);
> >> if (!entry) {
> >> entry = add_marker(name, format);
> >> - if (IS_ERR(entry)) {
> >> + if (IS_ERR(entry))
> >> ret = PTR_ERR(entry);
> >> - goto end;
> >> - }
> >> + } else if (format) {
> >> + if (!entry->format)
> >> + ret = marker_set_format(&entry, format);
> >> + else if (strcmp(entry->format, format))
> >> + ret = -EPERM;
> >> }
> >> + if (ret)
> >> + goto end;
> >> +
> >> /*
> >> * If we detect that a call_rcu is pending for this marker,
> >> * make sure it's executed now.
> >>
> >>
> >
>
>
--
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
next prev parent reply other threads:[~2008-10-09 13:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-08 2:23 Lai Jiangshan
2008-10-08 4:05 ` Mathieu Desnoyers
2008-10-08 5:04 ` Lai Jiangshan
2008-10-09 13:46 ` Mathieu Desnoyers [this message]
2008-10-09 14:05 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081009134606.GB15553@Krystal \
--to=mathieu.desnoyers@polymtl.ca \
--cc=laijs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®