From: Alexey Dobriyan <adobriyan@gmail.com>
To: torvalds@osdl.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: [GIT] /proc update
Date: Thu, 23 Oct 2008 22:49:28 +0400 [thread overview]
Message-ID: <20081023184928.GA22951@x200.localdomain> (raw)
In-Reply-To: <20081023183649.GA13432@x200.localdomain>
On Thu, Oct 23, 2008 at 10:36:49PM +0400, Alexey Dobriyan wrote:
> Linus, please, pull from
>
> git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc.git proc
>
> to get
> a) /proc/*/smaps fix aka "[vsyscall] is listed twice"
> b) proc_misc.c disintegration patches which spread that collective
> dumping ground into sensible pieces,
> c) trivial things.
>
> Regarding (b), it wasn't in -next because of huge rejects, it wasn't in
> -mm because of huge rejects, but (!) various people acked pieces, it was
> booted in several configurations here and proc files were created and
> worked as usual, it's trivial.
>
> Also, looks like, I can't put it into -next or into -mm and keep it for
> several months there because of rejects, and keeping it out of system
> will buy me approximately the same amount of testing as there is now.
>
> However, fs/proc/ compiliation was tested on huge cross-compile setup here
> and many, many randconfigs without warnings or errors.
>
> Now, if you don't buy it, pull from
>
> git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc.git proc-conservative
>
> to get just /proc/*/smaps fix and trivial things.
Alexey Dobriyan (33):
proc: proc_init_inodecache() can't fail
proc: spread __init
proc: switch /proc/loadavg to seq_file
proc: switch /proc/uptime to seq_file
proc: switch /proc/meminfo to seq_file
proc: switch /proc/version to seq_file
proc: move /proc/hardware to m68k-specific code
proc: move /proc/stram to m68k-specific code
proc: move /proc/filesystems to fs/filesystems.c
proc: switch /proc/cmdline to seq_file
proc: move /proc/execdomains to kernel/exec_domain.c
proc: remove remnants of ->read_proc in proc_misc.c
proc: move /proc/kmsg creation to fs/proc/kmsg.c
proc: move rest of /proc/locks to fs/locks.c
proc: move /proc/devices code to fs/proc/devices.c
proc: move /proc/cpuinfo code to fs/proc/cpuinfo.c
proc: move rest of /proc/partitions code to block/genhd.c
proc: move /proc/stat to fs/proc/stat.c
proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.c
proc: move /proc/slab_allocators boilerplate to mm/slab.c
proc: move /proc/slabinfo boilerplate to mm/slub.c, mm/slab.c
proc: move /proc/vmallocinfo to mm/vmalloc.c
proc: move /proc/buddyinfo boilerplate to mm/vmstat.c
proc: move /proc/pagetypeinfo boilerplate to mm/vmstat.c
proc: move /proc/vmstat boilerplate to mm/vmstat.c
proc: move /proc/zoneinfo boilerplate to mm/vmstat.c
proc: move /proc/diskstats boilerplate to block/genhd.c
proc: move /proc/modules boilerplate to kernel/module.c
proc: move /proc/schedstat boilerplate to kernel/sched_stats.h
proc: move all /proc/kcore stuff to fs/proc/kcore.c
proc: move pagecount stuff to fs/proc/page.c
proc: move /proc/vmcore creation to fs/proc/vmcore.c
proc: remove fs/proc/proc_misc.c
Arjan van de Ven (1):
proc: use WARN() rather than printk+backtrace
Joe Korty (1):
proc: fix vma display mismatch between /proc/pid/{maps,smaps}
arch/m68k/amiga/config.c | 21 +-
arch/m68k/atari/config.c | 15 +-
arch/m68k/atari/stram.c | 28 +-
arch/m68k/bvme6000/config.c | 11 -
arch/m68k/kernel/setup.c | 35 ++-
arch/m68k/mvme147/config.c | 10 -
arch/m68k/mvme16x/config.c | 15 +-
arch/m68k/q40/config.c | 10 -
arch/m68k/sun3/config.c | 12 +-
arch/m68k/sun3x/config.c | 12 +-
arch/x86/mm/pageattr.c | 11 +-
block/genhd.c | 37 ++-
fs/filesystems.c | 39 ++
fs/locks.c | 22 +-
fs/proc/Makefile | 13 +-
fs/proc/cmdline.c | 29 ++
fs/proc/cpuinfo.c | 24 ++
fs/proc/devices.c | 70 ++++
fs/proc/generic.c | 3 +-
fs/proc/inode.c | 3 +-
fs/proc/internal.h | 3 +-
fs/proc/interrupts.c | 53 +++
fs/proc/kcore.c | 14 +-
fs/proc/kmsg.c | 12 +-
fs/proc/loadavg.c | 51 +++
fs/proc/meminfo.c | 168 ++++++++
fs/proc/page.c | 147 +++++++
fs/proc/proc_devtree.c | 3 +-
fs/proc/proc_misc.c | 933 -------------------------------------------
fs/proc/proc_sysctl.c | 4 +-
fs/proc/root.c | 8 +-
fs/proc/stat.c | 153 +++++++
fs/proc/task_mmu.c | 25 +-
fs/proc/uptime.c | 43 ++
fs/proc/version.c | 34 ++
fs/proc/vmcore.c | 6 +-
include/asm-m68k/machdep.h | 2 +-
include/asm-x86/pgtable.h | 3 +-
include/linux/crash_dump.h | 2 -
include/linux/fs.h | 1 -
include/linux/genhd.h | 3 -
include/linux/hugetlb.h | 6 +-
include/linux/proc_fs.h | 5 -
include/linux/sched.h | 4 -
include/linux/slab.h | 5 -
include/linux/vmalloc.h | 2 -
include/linux/vmstat.h | 4 -
kernel/exec_domain.c | 33 ++-
kernel/module.c | 59 ++-
kernel/sched.c | 1 +
kernel/sched_stats.h | 9 +-
mm/hugetlb.c | 5 +-
mm/slab.c | 52 +++-
mm/slub.c | 29 +-
mm/vmalloc.c | 33 ++-
mm/vmstat.c | 69 +++-
56 files changed, 1263 insertions(+), 1141 deletions(-)
create mode 100644 fs/proc/cmdline.c
create mode 100644 fs/proc/cpuinfo.c
create mode 100644 fs/proc/devices.c
create mode 100644 fs/proc/interrupts.c
create mode 100644 fs/proc/loadavg.c
create mode 100644 fs/proc/meminfo.c
create mode 100644 fs/proc/page.c
delete mode 100644 fs/proc/proc_misc.c
create mode 100644 fs/proc/stat.c
create mode 100644 fs/proc/uptime.c
create mode 100644 fs/proc/version.c
next prev parent reply other threads:[~2008-10-23 18:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-23 18:36 Alexey Dobriyan
2008-10-23 18:49 ` Alexey Dobriyan [this message]
2009-03-30 22:48 Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081023184928.GA22951@x200.localdomain \
--to=adobriyan@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®