[patch 2.6.28-rc5] regulator: improved mode error checks

[David Brownell <david-b@pacbell.net>]

From: David Brownell <dbrownell@users.sourceforge.net>

Minor bugfixes in handling of regulator modes:

 - have the routine verifying regulator modes check against
   the set of legal modes (!);

 - have regulator_set_optimum_mode() verify the return value
   of regulator_ops.get_optimum_mode(), like drms_uA_update();

 - one call to regulator_ops.set_mode() treated zero as a
   failure code; make this consistent with other callers.

Both regulator_set_mode() and regulator_set_optimum_mode() now
require valid_ops_mask to include REGULATOR_CHANGE_MODE; that
seems like a bugfix too.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
 drivers/regulator/core.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -174,6 +174,16 @@ static int regulator_check_current_limit
 /* operating mode constraint check */
 static int regulator_check_mode(struct regulator_dev *rdev, int mode)
 {
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+	case REGULATOR_MODE_NORMAL:
+	case REGULATOR_MODE_IDLE:
+	case REGULATOR_MODE_STANDBY:
+		break;
+	default:
+		return -EINVAL;
+	}
+
 	if (!rdev->constraints) {
 		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
 		       rdev->desc->name);
@@ -1463,7 +1473,8 @@ int regulator_set_optimum_mode(struct re
 	mode = rdev->desc->ops->get_optimum_mode(rdev,
 						 input_uV, output_uV,
 						 total_uA_load);
-	if (ret <= 0) {
+	ret = regulator_check_mode(rdev, mode);
+	if (ret < 0) {
 		printk(KERN_ERR "%s: failed to get optimum mode for %s @"
 			" %d uA %d -> %d uV\n", __func__, rdev->desc->name,
 			total_uA_load, input_uV, output_uV);
@@ -1471,7 +1482,7 @@ int regulator_set_optimum_mode(struct re
 	}
 
 	ret = rdev->desc->ops->set_mode(rdev, mode);
-	if (ret <= 0) {
+	if (ret < 0) {
 		printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
 			__func__, mode, rdev->desc->name);
 		goto out;