From: Hannes Eder <hannes@hanneseder.net>
To: netdev@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 13/27] drivers/net/ixgbe: fix sparse warnings: make symbols static
Date: Mon, 22 Dec 2008 20:16:50 +0100 [thread overview]
Message-ID: <20081222191650.11807.36848.stgit@vmbox.hanneseder.net> (raw)
In-Reply-To: <20081222191259.11807.53190.stgit@vmbox.hanneseder.net>
Fix this sparse warnings:
drivers/net/ixgbe/ixgbe_82598.c:180:5: warning: symbol 'ixgbe_get_copper_link_capabilities_82598' was not declared. Should it be static?
drivers/net/ixgbe/ixgbe_82598.c:245:5: warning: symbol 'ixgbe_setup_fc_82598' was not declared. Should it be static?
drivers/net/ixgbe/ixgbe_82598.c:729:5: warning: symbol 'ixgbe_set_vmdq_82598' was not declared. Should it be static?
drivers/net/ixgbe/ixgbe_82598.c:773:5: warning: symbol 'ixgbe_set_vfta_82598' was not declared. Should it be static?
drivers/net/ixgbe/ixgbe_82598.c:897:5: warning: symbol 'ixgbe_read_analog_reg8_82598' was not declared. Should it be static?
drivers/net/ixgbe/ixgbe_82598.c:919:5: warning: symbol 'ixgbe_write_analog_reg8_82598' was not declared. Should it be static?
drivers/net/ixgbe/ixgbe_82598.c:940:5: warning: symbol 'ixgbe_read_i2c_eeprom_82598' was not declared. Should it be static?
drivers/net/ixgbe/ixgbe_82598.c:1000:5: warning: symbol 'ixgbe_get_supported_physical_layer_82598' was not declared. Should it be static?
drivers/net/ixgbe/ixgbe_dcb_82598.c:100:5: warning: symbol 'ixgbe_dcb_config_packet_buffers_82598' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
---
drivers/net/ixgbe/ixgbe_82598.c | 24 ++++++++++++------------
drivers/net/ixgbe/ixgbe_dcb_82598.c | 4 ++--
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 7e09dab..ad5699d 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -177,9 +177,9 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
*
* Determines the link capabilities by reading the AUTOC register.
**/
-s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg)
+static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
{
s32 status = IXGBE_ERR_LINK_SETUP;
u16 speed_ability;
@@ -242,7 +242,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
* Configures the flow control settings based on SW configuration. This
* function is used for 802.3x flow control configuration only.
**/
-s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
+static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
{
u32 frctl_reg;
u32 rmcs_reg;
@@ -726,7 +726,7 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
* @rar: receive address register index to associate with a VMDq index
* @vmdq: VMDq set index
**/
-s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
u32 rar_high;
@@ -770,8 +770,8 @@ static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
*
* Turn on/off specified VLAN in the VLAN filter table.
**/
-s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
+static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
{
u32 regindex;
u32 bitindex;
@@ -894,7 +894,7 @@ static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index)
*
* Performs read operation to Atlas analog register specified.
**/
-s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
+static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
{
u32 atlas_ctl;
@@ -916,7 +916,7 @@ s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
*
* Performs write operation to Atlas analog register specified.
**/
-s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
+static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
{
u32 atlas_ctl;
@@ -937,8 +937,8 @@ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
*
* Performs byte read operation to SFP module's EEPROM over I2C interface.
**/
-s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
- u8 *eeprom_data)
+static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
{
s32 status = 0;
u16 sfp_addr = 0;
@@ -997,7 +997,7 @@ out:
*
* Determines physical layer capabilities of the current configuration.
**/
-s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+static s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
{
s32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index fce6867..2c046b0 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -97,8 +97,8 @@ s32 ixgbe_dcb_get_pfc_stats_82598(struct ixgbe_hw *hw,
*
* Configure packet buffers for DCB mode.
*/
-s32 ixgbe_dcb_config_packet_buffers_82598(struct ixgbe_hw *hw,
- struct ixgbe_dcb_config *dcb_config)
+static s32 ixgbe_dcb_config_packet_buffers_82598(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
{
s32 ret_val = 0;
u32 value = IXGBE_RXPBSIZE_64KB;
next prev parent reply other threads:[~2008-12-22 19:21 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-22 19:14 [PATCH 00/27] drivers/net: fix sparse warnings Hannes Eder
2008-12-22 19:14 ` [PATCH 01/27] drivers/net: fix sparse warning: use ANSI-style function declaration Hannes Eder
2008-12-26 7:53 ` David Miller
2008-12-22 19:15 ` [PATCH 02/27] drivers/net: fix sparse warnings: make do-while a compound statement Hannes Eder
2008-12-22 22:14 ` Krzysztof Halasa
2008-12-22 23:44 ` Håkon Løvdal
2008-12-23 16:31 ` Krzysztof Halasa
2008-12-23 17:26 ` Harvey Harrison
2008-12-23 17:36 ` Krzysztof Halasa
2008-12-23 18:08 ` Linus Torvalds
2008-12-23 23:18 ` Krzysztof Halasa
2008-12-23 23:38 ` Linus Torvalds
2008-12-24 2:03 ` Krzysztof Halasa
2008-12-24 2:10 ` Linus Torvalds
2008-12-25 17:02 ` Krzysztof Halasa
2008-12-25 6:17 ` Junio C Hamano
2008-12-29 14:35 ` Hannes Eder
2008-12-26 7:55 ` David Miller
2008-12-22 19:15 ` [PATCH 03/27] drivers/net: fix sparse warning: returning void-valued expression Hannes Eder
2008-12-26 0:17 ` David Miller
2008-12-26 14:39 ` Hannes Eder
2008-12-26 19:59 ` Randy Dunlap
2008-12-27 19:11 ` Hannes Eder
2008-12-27 19:20 ` Sam Ravnborg
2008-12-27 21:38 ` [PATCH] Makefile: disable sparse warning "returning void-valued expression" Hannes Eder
2008-12-27 21:57 ` Sam Ravnborg
2008-12-26 7:56 ` [PATCH 03/27] drivers/net: fix sparse warning: returning void-valued expression David Miller
2008-12-22 19:15 ` [PATCH 04/27] drivers/net: fix sparse warnings: make symbols static Hannes Eder
2008-12-26 7:57 ` David Miller
2008-12-22 19:15 ` [PATCH 05/27] drivers/net/arcnet: " Hannes Eder
2008-12-26 7:57 ` David Miller
2008-12-22 19:15 ` [PATCH 06/27] drivers/net/atlx: " Hannes Eder
2008-12-26 7:58 ` David Miller
2008-12-22 19:15 ` [PATCH 07/27] drivers/net/bonding: fix sparse warnings: move decls to header file Hannes Eder
2008-12-26 7:59 ` David Miller
2008-12-22 19:16 ` [PATCH 08/27] drivers/net/cxgb3: comment out dead code Hannes Eder
2008-12-26 7:59 ` David Miller
2008-12-22 19:16 ` [PATCH 09/27] drivers/net/e1000e: fix sparse warnings: make symbols static Hannes Eder
2008-12-22 19:16 ` [PATCH 10/27] drivers/net/enic: fix sparse warning: make symbol static Hannes Eder
2008-12-26 8:01 ` David Miller
2008-12-22 19:16 ` [PATCH 11/27] drivers/net/igb: remove dead code (function 'igb_read_pci_cfg') Hannes Eder
2008-12-22 22:30 ` Jeff Kirsher
2008-12-26 8:03 ` David Miller
2008-12-22 19:16 ` [PATCH 12/27] drivers/net/irda: fix sparse warnings: make symbols static Hannes Eder
2008-12-26 8:03 ` David Miller
2008-12-22 19:16 ` Hannes Eder [this message]
2008-12-26 8:04 ` [PATCH 13/27] drivers/net/ixgbe: " David Miller
2008-12-22 19:16 ` [PATCH 14/27] drivers/net/netxen: fix sparse warnings: use NULL pointer instead of plain integer Hannes Eder
2008-12-26 8:04 ` David Miller
2008-12-22 19:17 ` [PATCH 15/27] drivers/net/qlge: fix sparse warnings: make symbols static Hannes Eder
2008-12-26 8:05 ` David Miller
2008-12-22 19:17 ` [PATCH 16/27] drivers/net/skfp: " Hannes Eder
2008-12-26 8:06 ` David Miller
2008-12-22 19:17 ` [PATCH 17/27] drivers/net/tokenring: " Hannes Eder
2008-12-26 8:07 ` David Miller
2008-12-22 19:17 ` [PATCH 18/27] drivers/net/tulip: fix sparse warnings: make do-while a compound statement Hannes Eder
2008-12-26 8:07 ` David Miller
2008-12-22 19:17 ` [PATCH 19/27] drivers/net/usb: fix sparse warnings: make symbols static Hannes Eder
2008-12-26 8:08 ` David Miller
2008-12-22 19:17 ` [PATCH 20/27] drivers/net/wan: fix sparse warnings: make do-while a compound statement Hannes Eder
2008-12-22 22:09 ` Krzysztof Halasa
2008-12-22 19:18 ` [PATCH 21/27] drivers/net/wan: fix sparse warning: make symbol static Hannes Eder
2008-12-26 8:11 ` David Miller
2008-12-22 19:18 ` [PATCH 22/27] drivers/net/wan/z85230.c: fix sparse warnings: un-EXPORT symbols Hannes Eder
2008-12-26 8:12 ` David Miller
2008-12-22 19:18 ` [PATCH 23/27] drivers/net/wireless: fix sparse warnings: make symbols static Hannes Eder
2008-12-26 8:13 ` David Miller
2008-12-22 19:18 ` [PATCH 24/27] drivers/net/wireless/ath9k: " Hannes Eder
2008-12-22 19:18 ` [PATCH 25/27] drivers/net/wireless/b43: " Hannes Eder
2008-12-26 8:13 ` David Miller
2008-12-22 19:18 ` [PATCH 26/27] drivers/net/wireless/ipw2x00: " Hannes Eder
2008-12-26 8:14 ` David Miller
2008-12-22 19:19 ` [PATCH 27/27] drivers/net/wireless/prism54: " Hannes Eder
2008-12-26 8:15 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081222191650.11807.36848.stgit@vmbox.hanneseder.net \
--to=hannes@hanneseder.net \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®