From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
Pavel Machek <pavel@suse.cz>,
pm list <linux-pm@lists.linux-foundation.org>,
Matthew Wilcox <matthew@wil.cx>, "H. Peter Anvin" <hpa@zytor.com>,
LKML <linux-kernel@vger.kernel.org>, Greg KH <greg@kroah.com>,
Linux PCI <linux-pci@vger.kernel.org>
Subject: [RFC][PATCH 3/10] PCI PM: Power-manage devices without drivers during suspend-resume
Date: Tue, 30 Dec 2008 23:38:41 +0100 [thread overview]
Message-ID: <200812302338.42915.rjw@sisk.pl> (raw)
In-Reply-To: <200812302333.45560.rjw@sisk.pl>
PCI devices without drivers can be put into low power states during
suspend with the help of pci_prepare_to_sleep() and prevented from
generating wake-up events during resume with the help of
pci_enable_wake(). However, it's better not to put bridges into
low power states during suspend, because that might result in entire
bus segments being powered off.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
drivers/pci/pci-driver.c | 33 +++++++++++++++++++++++++++++----
1 file changed, 29 insertions(+), 4 deletions(-)
Index: linux-2.6/drivers/pci/pci-driver.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci-driver.c
+++ linux-2.6/drivers/pci/pci-driver.c
@@ -421,6 +421,31 @@ static int pci_legacy_resume_early(struc
return error;
}
+/* Auxiliary functions used by the new power management framework */
+
+static bool pci_is_bridge(struct pci_dev *pci_dev)
+{
+ return !!(pci_dev->subordinate);
+}
+
+static int pci_pm_default_resume(struct pci_dev *pci_dev)
+{
+ if (!pci_is_bridge(pci_dev))
+ pci_enable_wake(pci_dev, PCI_D0, false);
+
+ return pci_default_pm_resume_late(pci_dev);
+}
+
+static void pci_pm_default_suspend(struct pci_dev *pci_dev)
+{
+ pci_default_pm_suspend_early(pci_dev);
+
+ if (!pci_is_bridge(pci_dev))
+ pci_prepare_to_sleep(pci_dev);
+}
+
+/* New power management framework */
+
static int pci_pm_prepare(struct device *dev)
{
struct device_driver *drv = dev->driver;
@@ -456,7 +481,7 @@ static int pci_pm_suspend(struct device
} else if (pci_has_legacy_pm_support(pci_dev)) {
error = pci_legacy_suspend(dev, PMSG_SUSPEND);
} else {
- pci_default_pm_suspend_early(pci_dev);
+ pci_pm_default_suspend(pci_dev);
}
pci_fixup_device(pci_fixup_suspend, pci_dev);
@@ -498,7 +523,7 @@ static int pci_pm_resume(struct device *
} else if (pci_has_legacy_pm_support(pci_dev)) {
error = pci_legacy_resume(dev);
} else {
- error = pci_default_pm_resume_late(pci_dev);
+ error = pci_pm_default_resume(pci_dev);
}
return error;
@@ -628,7 +653,7 @@ static int pci_pm_poweroff(struct device
} else if (pci_has_legacy_pm_support(pci_dev)) {
error = pci_legacy_suspend(dev, PMSG_HIBERNATE);
} else {
- pci_default_pm_suspend_early(pci_dev);
+ pci_pm_default_suspend(pci_dev);
}
pci_fixup_device(pci_fixup_suspend, pci_dev);
@@ -667,7 +692,7 @@ static int pci_pm_restore(struct device
} else if (pci_has_legacy_pm_support(pci_dev)) {
error = pci_legacy_resume(dev);
} else {
- error = pci_default_pm_resume_late(pci_dev);
+ error = pci_pm_default_resume(pci_dev);
}
return error;
next prev parent reply other threads:[~2008-12-30 22:50 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200812190049.34343.rjw@sisk.pl>
2008-12-28 15:07 ` [RFC][PATCH] PCI PM: Make new suspend-resume callbacks carry out core operations (rev. 2) Rafael J. Wysocki
2008-12-30 22:33 ` [RFC][PATCH 0/10] PCI PM: Make new suspend-resume callbacks carry out core operations Rafael J. Wysocki
2008-12-30 22:35 ` [RFC][PATCH 1/10] PCI PM: Fix poweroff and restore callbacks Rafael J. Wysocki
2009-01-05 10:00 ` Pavel Machek
2008-12-30 22:37 ` [RFC][PATCH 2/10] PCI PM: Add suspend counterpart of pci_reenable_device Rafael J. Wysocki
2009-01-05 10:49 ` Pavel Machek
2009-01-05 13:17 ` Rafael J. Wysocki
2008-12-30 22:38 ` Rafael J. Wysocki [this message]
2009-01-05 10:51 ` [RFC][PATCH 3/10] PCI PM: Power-manage devices without drivers during suspend-resume Pavel Machek
2008-12-30 22:40 ` [RFC][PATCH 4/10] PCI PM: Move pci_has_legacy_pm_support Rafael J. Wysocki
2009-01-05 10:51 ` Pavel Machek
2008-12-30 22:41 ` [RFC][PATCH 5/10] PCI PM: Avoid touching devices behind bridges in unknown state Rafael J. Wysocki
2009-01-01 21:09 ` [RFC][PATCH 5/10] PCI PM: Avoid touching devices behind bridges in unknown state (rev. 2) Rafael J. Wysocki
2009-01-05 10:58 ` Pavel Machek
2009-01-05 13:30 ` Rafael J. Wysocki
2009-01-07 22:32 ` Pavel Machek
2009-01-07 23:02 ` Rafael J. Wysocki
2008-12-30 22:43 ` [RFC][PATCH 6/10] PCI PM: Rearrange code in pci-driver.c Rafael J. Wysocki
2009-01-05 11:25 ` Pavel Machek
2009-01-05 13:32 ` Rafael J. Wysocki
2008-12-30 22:44 ` [RFC][PATCH 7/10] PCI PM: Call pci_fixup_device from legacy routines Rafael J. Wysocki
2009-01-05 11:25 ` Pavel Machek
2008-12-30 22:45 ` [RFC][PATCH 8/10] PCI PM: Register power state of devices during initialization Rafael J. Wysocki
2009-01-05 11:19 ` Pavel Machek
2008-12-30 22:47 ` [RFC][PATCH 9/10] PCI PM: Run default PM callbacks for all devices using new framework Rafael J. Wysocki
2009-01-05 11:26 ` Pavel Machek
2008-12-30 22:49 ` [RFC][PATCH 10/10] PCI PM: Put PM callbacks in the order of execution Rafael J. Wysocki
2009-01-05 11:21 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812302338.42915.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=greg@kroah.com \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=matthew@wil.cx \
--cc=pavel@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®