From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
To: "Raja R Harinath" <harinath@hurrynot.org>,
linux-kernel@vger.kernel.org, Ingo Molnar <mingo@elte.hu>,
Yinghai Lu <yinghai@kernel.org>
Cc: kosaki.motohiro@jp.fujitsu.com
Subject: Re: [PATCH for -tip 4/4] irq: for_each_irq_desc() makes simplify
Date: Sun, 4 Jan 2009 03:11:05 +0900 (JST) [thread overview]
Message-ID: <20090104030849.069A.KOSAKI.MOTOHIRO@jp.fujitsu.com> (raw)
In-Reply-To: <2f11576a0901012156w30a6b162v96aed31d357929e6@mail.gmail.com>
> Hi
>
> >> # define for_each_irq_desc(irq, desc) \
> >> for (irq = 0, desc = irq_to_desc(irq); irq < nr_irqs; \
> >> - irq++, desc = irq_to_desc(irq))
> >> + irq++, desc = irq_to_desc(irq)) \
> >> + if (desc)
> >> +
> >> +
> >> # define for_each_irq_desc_reverse(irq, desc) \
> >> for (irq = nr_irqs - 1, desc = irq_to_desc(irq); irq >= 0; \
> >> - irq--, desc = irq_to_desc(irq))
> >> + irq--, desc = irq_to_desc(irq)) \
> >> + if (desc)
> >
> > I know this has gone in, but isn't this naked 'if' unsafe. Consider the
> > following hypothetical code:
> >
> > if (safe)
> > for_each_irq_desc(irq, desc) {
> > ...
> > }
> > else
> > panic();
> >
> > With the macro definition above, the loop would panic() each time !desc,
> > and _not_ panic() when !safe. I'd consider this behaviour to be
> > unexpected, to say the least :-)
>
> Correct.
>
> > The fix is to change the
> >
> > if (desc)
> >
> > in the macro to
> >
> > if (!desc) ; else
>
> Ok. I'll do that.
> Very thanks for good reviewing.
Done.
Thnaks Raja.
Ingo, could you please apply this patch to -tip tree?
===
>From 6f1210e6912afd8ca07518e82f89ba92137302b2 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Sun, 4 Jan 2009 02:37:26 +0900
Subject: [PATCH] sparseirq: fix for_each_irq_desc() nit
Raja reported for_each_irq_desc() has possibility unsafeness.
if anyone write folliwing code, for_each_irq_desc() doesn't works intetionally.
(Now, its code doesn't exist at all)
if (safe)
for_each_irq_desc(irq, desc) {
...
}
else
panic();
Reported-by: Raja R Harinath <harinath@hurrynot.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Yinghai Lu <yinghai@kernel.org>
---
include/linux/irqnr.h | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
index 5504a5c..99b91c6 100644
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -23,13 +23,17 @@ extern struct irq_desc *irq_to_desc(unsigned int irq);
# define for_each_irq_desc(irq, desc) \
for (irq = 0, desc = irq_to_desc(irq); irq < nr_irqs; \
irq++, desc = irq_to_desc(irq)) \
- if (desc)
+ if (!desc) \
+ ; \
+ else
# define for_each_irq_desc_reverse(irq, desc) \
for (irq = nr_irqs - 1, desc = irq_to_desc(irq); irq >= 0; \
irq--, desc = irq_to_desc(irq)) \
- if (desc)
+ if (!desc) \
+ ; \
+ else
#endif /* CONFIG_GENERIC_HARDIRQS */
--
1.5.3
next prev parent reply other threads:[~2009-01-03 18:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-26 3:21 [PATCH for -tip 0/4] various irq cleanups KOSAKI Motohiro
2008-12-26 3:23 ` [PATCH for -tip 1/4] hrtimer: remove #include <linux/irq.h> KOSAKI Motohiro
2008-12-26 3:24 ` [PATCH for -tip 2/4] irq: for_each_irq_desc() move to irqnr.h KOSAKI Motohiro
2008-12-26 3:28 ` [PATCH for -tip 3/4] proc: remove ifdef CONFIG_SPARSE_IRQ from stat.c KOSAKI Motohiro
2008-12-26 4:18 ` Yinghai Lu
2008-12-26 4:21 ` KOSAKI Motohiro
2008-12-26 4:36 ` Yinghai Lu
2008-12-26 5:24 ` KOSAKI Motohiro
2008-12-26 5:59 ` Yinghai Lu
2008-12-26 8:49 ` Ingo Molnar
2008-12-26 3:29 ` [PATCH for -tip 4/4] irq: for_each_irq_desc() makes simplify KOSAKI Motohiro
2008-12-26 4:23 ` Yinghai Lu
2009-01-01 18:05 ` Raja R Harinath
2009-01-02 5:56 ` KOSAKI Motohiro
2009-01-03 18:11 ` KOSAKI Motohiro [this message]
2009-01-07 22:18 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090104030849.069A.KOSAKI.MOTOHIRO@jp.fujitsu.com \
--to=kosaki.motohiro@jp.fujitsu.com \
--cc=harinath@hurrynot.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®