From: Andi Kleen <andi@firstfloor.org>
To: akpm@linux-foundation.org, x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] [4/5] Use asm stubs for 32bit sigreturn codes
Date: Mon, 5 Jan 2009 00:36:41 +0100 (CET) [thread overview]
Message-ID: <20090104233641.6F5723E6652@basil.firstfloor.org> (raw)
In-Reply-To: <200901051236.281008835@firstfloor.org>
32bit sigreturn/rt_sigreturn currently uses some magic casting
with assumptions about the stack layout
to simulate call by reference for the pt_regs structure on the
stack. This is fragile, non standard and according to reports
breaks with LLVM at least. I suppose it could break in
future gcc versions too when their stack layout changes.
So instead of having this magic in C do it in small
assembler stubs similar to what x86-64 does (which
always passes a pointer to pt_regs for such functions)
This also leads to cleaner code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
arch/x86/kernel/entry_32.S | 10 ++++++++++
arch/x86/kernel/signal_32.c | 13 ++-----------
arch/x86/kernel/syscall_table_32.S | 4 ++--
3 files changed, 14 insertions(+), 13 deletions(-)
Index: linux-2.6.28-test/arch/x86/kernel/entry_32.S
===================================================================
--- linux-2.6.28-test.orig/arch/x86/kernel/entry_32.S 2008-11-06 20:26:33.000000000 +0100
+++ linux-2.6.28-test/arch/x86/kernel/entry_32.S 2009-01-02 16:01:06.000000000 +0100
@@ -1206,6 +1206,16 @@
#endif /* CONFIG_DYNAMIC_FTRACE */
#endif /* CONFIG_FUNCTION_TRACER */
+ENTRY(stub_sigreturn)
+ movl %esp,%eax
+ jmp sys_sigreturn
+END(stub_sigreturn)
+
+ENTRY(stub_rt_sigreturn)
+ movl %esp,%eax
+ jmp sys_rt_sigreturn
+END(stub_rt_sigreturn)
+
.section .rodata,"a"
#include "syscall_table_32.S"
Index: linux-2.6.28-test/arch/x86/kernel/signal_32.c
===================================================================
--- linux-2.6.28-test.orig/arch/x86/kernel/signal_32.c 2008-10-24 13:34:40.000000000 +0200
+++ linux-2.6.28-test/arch/x86/kernel/signal_32.c 2009-01-02 16:01:06.000000000 +0100
@@ -169,14 +169,12 @@
return err;
}
-asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
+asmlinkage unsigned long sys_sigreturn(struct pt_regs *regs)
{
struct sigframe __user *frame;
- struct pt_regs *regs;
unsigned long ax;
sigset_t set;
- regs = (struct pt_regs *) &__unused;
frame = (struct sigframe __user *)(regs->sp - 8);
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -212,7 +210,7 @@
return 0;
}
-static long do_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long ax;
@@ -243,13 +241,6 @@
return 0;
}
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
-{
- struct pt_regs *regs = (struct pt_regs *)&__unused;
-
- return do_rt_sigreturn(regs);
-}
-
/*
* Set up a signal frame.
*/
Index: linux-2.6.28-test/arch/x86/kernel/syscall_table_32.S
===================================================================
--- linux-2.6.28-test.orig/arch/x86/kernel/syscall_table_32.S 2008-08-15 17:13:40.000000000 +0200
+++ linux-2.6.28-test/arch/x86/kernel/syscall_table_32.S 2009-01-02 16:01:06.000000000 +0100
@@ -118,7 +118,7 @@
.long sys_sysinfo
.long sys_ipc
.long sys_fsync
- .long sys_sigreturn
+ .long stub_sigreturn
.long sys_clone /* 120 */
.long sys_setdomainname
.long sys_newuname
@@ -172,7 +172,7 @@
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
- .long sys_rt_sigreturn
+ .long stub_rt_sigreturn
.long sys_rt_sigaction
.long sys_rt_sigprocmask /* 175 */
.long sys_rt_sigpending
next prev parent reply other threads:[~2009-01-04 23:36 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-04 23:36 [PATCH] [0/5] Couple of x86 patches for 2.6.29 Andi Kleen
2009-01-04 23:36 ` [PATCH] [1/5] Only scan the root bus in early PCI quirks Andi Kleen
2009-01-04 23:51 ` Yinghai Lu
2009-01-05 1:46 ` Andi Kleen
2009-01-04 23:36 ` [PATCH] [2/5] Allow HPET force enable on ICH10 HPET Andi Kleen
2009-01-04 23:36 ` [PATCH] [3/5] Mark complex bitops.h inlines as __always_inline Andi Kleen
2009-01-06 0:03 ` Andrew Morton
2009-01-06 10:17 ` Ingo Molnar
2009-01-06 14:32 ` Andi Kleen
2009-01-07 13:26 ` Ingo Molnar
2009-01-07 19:46 ` Andi Kleen
2009-01-06 19:17 ` Hugh Dickins
2009-01-07 13:18 ` Ingo Molnar
2009-01-08 2:16 ` Hugh Dickins
2009-01-08 5:07 ` Andi Kleen
2009-01-08 8:04 ` H. Peter Anvin
2009-01-04 23:36 ` Andi Kleen [this message]
2009-01-05 0:08 ` [PATCH] [4/5] Use asm stubs for 32bit sigreturn codes H. Peter Anvin
2009-01-04 23:36 ` [PATCH] [5/5] Avoid theoretical vmalloc fault loop Andi Kleen
2009-01-05 11:47 ` Nick Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090104233641.6F5723E6652@basil.firstfloor.org \
--to=andi@firstfloor.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome