On Mon, Jan 05, 2009 at 09:27:35PM +0100, Guennadi Liakhovetski wrote:
> On Mon, 5 Jan 2009, Luotao Fu wrote:
> 
> > Defines for CIR Registers have been moved to pxa_camera.h. So remove them from
> > pxa_camera.c to avoid compiler warnings.
> > 
> > Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
> > ---
> >  drivers/media/video/pxa_camera.c |   13 -------------
> >  1 files changed, 0 insertions(+), 13 deletions(-)
> > 
> > diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
> > index cb8c5e1..4eda750 100644
> > --- a/drivers/media/video/pxa_camera.c
> > +++ b/drivers/media/video/pxa_camera.c
> > @@ -44,19 +44,6 @@
> >  #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
> >  #define PXA_CAM_DRV_NAME "pxa27x-camera"
> >  
> > -/* Camera Interface */
> > -#define CICR0		0x0000
> > -#define CICR1		0x0004
> > -#define CICR2		0x0008
> > -#define CICR3		0x000C
> > -#define CICR4		0x0010
> > -#define CISR		0x0014
> > -#define CIFR		0x0018
> > -#define CITOR		0x001C
> > -#define CIBR0		0x0028
> > -#define CIBR1		0x0030
> > -#define CIBR2		0x0038
> > -
> >  #define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
> >  #define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
> >  #define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
> > -- 
> > 1.5.6.5
> 
> NAK. Please, see an earlier patch from Eric Miao, a correct fix for this 
> is in the queue.

Ah ok. I checked the mainline git tree and video4linux tree as well as did some
search in a/lkml before I made this patch. I was indeed wondering why such
obvious thing stays unfixed. I'll take a look for the patch by Eric Miao then.

Thanks for the information

cheers
Luotao Fu
-- 
Pengutronix e.K.                           | Dipl.-Ing. Luotao Fu        |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |