From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759681AbZAHU0u (ORCPT ); Thu, 8 Jan 2009 15:26:50 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752599AbZAHU0l (ORCPT ); Thu, 8 Jan 2009 15:26:41 -0500 Received: from outbound-mail-37.bluehost.com ([69.89.20.191]:54963 "HELO outbound-mail-37.bluehost.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1750873AbZAHU0k (ORCPT ); Thu, 8 Jan 2009 15:26:40 -0500 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=default; d=virtuousgeek.org; h=Received:From:To:Subject:Date:User-Agent:Cc:References:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:Content-Disposition:Message-Id:X-Identified-User; b=lgwRyOLpSF8NLopfnmGfjWHkg9/JvIZoZSScoMO0p0ihfWAfIoob4i90hWKaoFtgvd1Z6h8rE2FBZU3uq7G10xmzs3C4GErClnuh1WcmuLNqQuawUsX//VBmN2mCjgPV; From: Jesse Barnes To: "Rafael J. Wysocki" Subject: Re: Can't allocate resources for PCI video card behind bridge Date: Thu, 8 Jan 2009 12:26:38 -0800 User-Agent: KMail/1.9.10 Cc: Connor Behan , linux-kernel@vger.kernel.org, Linux PCI , Linus Torvalds References: <49665493.4070808@gmail.com> <200901082057.00170.rjw@sisk.pl> In-Reply-To: <200901082057.00170.rjw@sisk.pl> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200901081226.38909.jbarnes@virtuousgeek.org> X-Identified-User: {642:box128.bluehost.com:virtuous:virtuousgeek.org} {sentby:smtp auth 75.111.27.49 authed with jbarnes@virtuousgeek.org} Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thursday, January 8, 2009 11:56 am Rafael J. Wysocki wrote: > Cc-ing linux-pci and Jesse. > > On Thursday 08 January 2009, Connor Behan wrote: > > Hello, I am trying to use two video cards. One is the built in ATI Rage > > Mobility M3 AGP card which drives the screen of my laptop (Thinkpad a22m > > 2628-S1U if that matters), the other is the ATI Radeon X1550 PCI card in > > the Thinkpad Dock II which is supposed to drive an external monitor. > > X1550 is a PCI-E chipset but my card is a PCI card with an onboard PCI > > to PCI-E bridge. I first tried this with kernel 2.6.27 as packaged by > > Archlinux and got the following startup errors: > > > > pci 0000:00:04.0: BAR 7: can't allocate resource > > pci 0000:00:04.0: BAR 8: can't allocate resource > > pci 0000:00:04.0: BAR 9: can't allocate resource > > > > I've seen this problem discussed in the archives and couldn't find what > > looked like a fix. I WAS able to fix this by loading dock, pci_slot, > > pci_hotplug and acpiphp and appending pci=assign-busses. However since > > then I have run a package update to kernel 2.6.27.10 and I am once again > > getting the same problem even with the same modules and parameters. I > > have since tried appending irqpoll, pci=bios, pci=routeirq and acpi=off > > with no success. I have even rolled back my kernel to 2.6.27 (and the > > headers and a few other packages) setup my system the way it was setup > > before to the best of my knowledge but I still can't get the PCI card > > working again. Another subtle change must be responsible. > > > > Certain PCI devices in the dock are working such as the Cardbus slots... > > but I could care less about them... is there a way I could tell the > > kernel to prioritize the video card and sacrifice Cardbus slots first if > > it can't allocate enough resources? Also my lspci output shows a large > > gap 01:00.0 to 06:00.0 so some part of my system must have expected > > other devices in that range. When I had the video card working it was > > 02:00.0. I have tried changing the four IRQ numbers in the BIOS but this > > is pointless at best and sometimes causes my soundcard to be disabled. > > My dmesg, lspci and (trimmed) kernel config are pasted: > > > > dmesg: http://pastebin.com/f3ae15a58 > > lspci: http://pastebin.com/f5d7dee6e > > .config: http://pastebin.com/fb925760 > > > > I'm hoping for a solution that doesn't require recompiling the kernel > > but I definitely would if that's necessary. In any event I'll be much > > more vigilant about system updates if I get this working again. > > Thank-you very much for your time. Can you post the output of lspci -vvv somewhere as well after trying 2.6.28? It may be that we want the "don't allocate resources for transparent bridges" patch after all: diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index ea979f2..586451c 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -467,8 +467,12 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus) } } - /* The root bus? */ - if (!bus->self) + /* + * We don't need to allocate PCI bridging windows + * for a root bus (everything bridged) or for a + * transparent one. + */ + if (!bus->self || bus->self->transparent) return; switch (bus->self->class >> 8) { Since in your case it looks like it's incorrectly causing some of your other resources to be disabled: pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling Sorry but you might have to build a few kernels to help us fix this one. :) Thanks, -- Jesse Barnes, Intel Open Source Technology Center