From: Philippe Grenard <philippe.grenard@laposte.net>
To: linux-kernel@vger.kernel.org
Cc: Len Brown <lenb@kernel.org>
Subject: Re: PROBLEM: cannot get stable system since 2.6.28 kernel
Date: Fri, 13 Feb 2009 21:43:08 +0100 [thread overview]
Message-ID: <200902132143.08471.philippe.grenard@laposte.net> (raw)
In-Reply-To: <alpine.LFD.2.00.0902131356010.5440@localhost.localdomain>
On Friday 13 February 2009 19:56:54 Len Brown wrote:
> dmesg -- assuming you can boot far enough to capture it,
> may be helpful.
>
> also, disabling PREEMPT may be interesting to try.
>
> cheers,
> --
> Len Brown, Intel Open Source Technology Center
difference between the two /proc/cpuinfos shows this :
especially "cpu cores" and "cpuid level" are quite different : does this may be
some hint ?
--- proc_cpuinfo_2.6.27.10 2009-02-13 21:28:09.000000000 +0100
+++ proc_cpuinfo_2.6.29-rc4_test1 2009-02-13 21:28:00.000000000 +0100
@@ -4,20 +4,20 @@
model : 23
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping : 10
-cpu MHz : 2999.632
+cpu MHz : 2999.773
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
-cpu cores : 1
+cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
-cpuid level : 2
+cpuid level : 13
wp : yes
-flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr s
se sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts rep_good nopl pni
monitor ds_cpl vmx smx est tm2 ssse3 cx16
xtpr sse4_1 lahf_lm
-bogomips : 5999.26
+flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr s
se sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good
pni dtes64 monitor ds_cpl vmx smx est
tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority
+bogomips : 5999.54
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
@@ -29,20 +29,20 @@
model : 23
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping : 10
-cpu MHz : 2999.632
+cpu MHz : 2999.773
cache size : 6144 KB
physical id : 0
siblings : 2
-core id : 0
-cpu cores : 1
+core id : 1
+cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
-cpuid level : 2
+cpuid level : 13
wp : yes
-flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr s
se sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts rep_good nopl pni
monitor ds_cpl vmx smx est tm2 ssse3 cx16
xtpr sse4_1 lahf_lm
-bogomips : 8398.69
+flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr s
se sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good
pni dtes64 monitor ds_cpl vmx smx est
tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority
+bogomips : 5999.07
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
prev parent reply other threads:[~2009-02-13 20:42 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-13 18:44 Philippe Grenard
2009-02-13 18:56 ` Len Brown
2009-02-13 19:56 ` Philippe Grenard
2009-02-13 20:48 ` John Stoffel
2009-02-14 8:17 ` Philippe Grenard
2009-02-14 9:20 ` Jaswinder Singh Rajput
2009-02-14 9:24 ` Jaswinder Singh Rajput
2009-02-15 12:17 ` Philippe Grenard
2009-02-16 0:21 ` John Stoffel
2009-02-16 18:25 ` PROBLEM: cannot get stable system since 2.6.28 kernel (amd64) Philippe Grenard
2009-02-17 4:46 ` John Stoffel
2009-02-17 16:51 ` Philippe Grenard
2009-02-20 20:08 ` Philippe Grenard
2009-02-20 21:58 ` Ingo Molnar
2009-02-21 10:21 ` Philippe Grenard
2009-02-21 23:17 ` Suresh Siddha
2009-02-22 3:29 ` H. Peter Anvin
2009-02-22 9:11 ` Philippe Grenard
2009-02-24 20:00 ` Philippe Grenard
2009-02-13 20:43 ` Philippe Grenard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200902132143.08471.philippe.grenard@laposte.net \
--to=philippe.grenard@laposte.net \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome