From: Borislav Petkov <petkovbb@googlemail.com>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths
Date: Mon, 16 Feb 2009 10:25:01 +0100 [thread overview]
Message-ID: <20090216092501.GA24323@gollum.tnic> (raw)
In-Reply-To: <20090216001422.27491.17281.sendpatchset@localhost.localdomain>
On Mon, Feb 16, 2009 at 01:14:22AM +0100, Bartlomiej Zolnierkiewicz wrote:
> From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Subject: [PATCH] ide-cd: unify cdrom_newpc_intr() exit paths
>
> * Move cdrom_end_request() calls from cdrom_decode_status()
> and ide_cd_check_ireason() to cdrom_newpc_intr().
>
> * Unify cdrom_newpc_intr() exit paths.
>
> There should be no functional changes caused by this patch.
>
> Cc: Borislav Petkov <petkovbb@gmail.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> ---
> drivers/ide/ide-cd.c | 48 +++++++++++++++++++++++-------------------------
> 1 file changed, 23 insertions(+), 25 deletions(-)
>
> Index: b/drivers/ide/ide-cd.c
> ===================================================================
> --- a/drivers/ide/ide-cd.c
> +++ b/drivers/ide/ide-cd.c
> @@ -291,7 +291,8 @@ static void cdrom_end_request(ide_drive_
> /*
> * Returns:
> * 0: if the request should be continued.
> - * 1: if the request was ended.
> + * 1: if the request will be going through error recovery.
> + * 2: if the request should be ended.
Yeah, we need defines for those. Especially if they're checked in other
functions:
if (rc == 2)
is simply not ok :). Rather,
if (rc == DO_END_REQUEST)
or something like that is much better, imho.
> */
> static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
> {
> @@ -324,10 +325,7 @@ static int cdrom_decode_status(ide_drive
> * Just give up.
> */
> rq->cmd_flags |= REQ_FAILED;
> - cdrom_end_request(drive, 0);
> - ide_error(drive, "request sense failure", stat);
> - return 1;
> -
> + return 2;
> } else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
> /* All other functions, except for READ. */
>
> @@ -467,14 +465,12 @@ static int cdrom_decode_status(ide_drive
> */
> if (stat & ATA_ERR)
> cdrom_queue_request_sense(drive, NULL, NULL);
> + return 1;
> } else {
> blk_dump_rq_flags(rq, PFX "bad rq");
> - cdrom_end_request(drive, 0);
> + return 2;
> }
>
> - /* retry, or handle the next request */
> - return 1;
> -
> end_request:
> if (stat & ATA_ERR) {
> struct request_queue *q = drive->queue;
> @@ -487,10 +483,9 @@ end_request:
> hwif->rq = NULL;
>
> cdrom_queue_request_sense(drive, rq->sense, rq);
> + return 1;
> } else
> - cdrom_end_request(drive, 0);
> -
> - return 1;
> + return 2;
> }
>
> /*
> @@ -534,7 +529,6 @@ static int ide_cd_check_ireason(ide_driv
> if (rq->cmd_type == REQ_TYPE_ATA_PC)
> rq->cmd_flags |= REQ_FAILED;
>
> - cdrom_end_request(drive, 0);
> return -1;
> }
>
> @@ -736,7 +730,8 @@ static ide_startstop_t cdrom_newpc_intr(
> xfer_func_t *xferfunc;
> ide_expiry_t *expiry = NULL;
> int dma_error = 0, dma, stat, thislen, uptodate = 0;
> - int write = (rq_data_dir(rq) == WRITE) ? 1 : 0;
> + int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc;
> + int sense = blk_sense_request(rq);
> unsigned int timeout;
> u16 len;
> u8 ireason;
> @@ -756,8 +751,12 @@ static ide_startstop_t cdrom_newpc_intr(
> }
> }
>
> - if (cdrom_decode_status(drive, 0, &stat))
> + rc = cdrom_decode_status(drive, 0, &stat);
> + if (rc) {
> + if (rc == 2)
> + goto out_end;
> return ide_stopped;
> + }
>
> /* using dma, transfer is complete now */
> if (dma) {
> @@ -802,8 +801,6 @@ static ide_startstop_t cdrom_newpc_intr(
> rq->cmd_flags |= REQ_FAILED;
> uptodate = 0;
> }
> - cdrom_end_request(drive, uptodate);
> - return ide_stopped;
> } else if (!blk_pc_request(rq)) {
> ide_cd_request_sense_fixup(drive, rq);
> /* complain if we still have data left to transfer */
> @@ -815,17 +812,16 @@ static ide_startstop_t cdrom_newpc_intr(
> }
>
> /* check which way to transfer data */
> - if (ide_cd_check_ireason(drive, rq, len, ireason, write))
> - return ide_stopped;
> + rc = ide_cd_check_ireason(drive, rq, len, ireason, write);
> + if (rc)
> + goto out_end;
>
> if (blk_fs_request(rq)) {
> if (write == 0) {
> int nskip;
>
> - if (ide_cd_check_transfer_size(drive, len)) {
> - cdrom_end_request(drive, 0);
> - return ide_stopped;
> - }
> + if (ide_cd_check_transfer_size(drive, len))
> + goto out_end;
>
> /*
> * First, figure out if we need to bit-bucket
> @@ -918,7 +914,7 @@ static ide_startstop_t cdrom_newpc_intr(
> else
> rq->data += blen;
> }
> - if (!write && blk_sense_request(rq))
> + if (sense && write == 0)
> rq->sense_len += blen;
> }
>
> @@ -939,7 +935,7 @@ static ide_startstop_t cdrom_newpc_intr(
> return ide_started;
>
> out_end:
> - if (blk_pc_request(rq)) {
> + if (blk_pc_request(rq) && rc == 0) {
> unsigned int dlen = rq->data_len;
>
> if (dma)
> @@ -951,6 +947,8 @@ out_end:
> hwif->rq = NULL;
> } else {
> cdrom_end_request(drive, uptodate);
> + if (sense && rc == 2)
> + ide_error(drive, "request sense failure", stat);
> }
> return ide_stopped;
> }
--
Regards/Gruss,
Boris.
next prev parent reply other threads:[~2009-02-16 9:25 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-16 0:13 [PATCH 00/20] ide-cd: use scatterlists also for PIO transfers Bartlomiej Zolnierkiewicz
2009-02-16 0:13 ` [PATCH 01/20] ide: add support for arbitrary transfer lengths to ide_pio_bytes() Bartlomiej Zolnierkiewicz
2009-02-16 0:13 ` [PATCH 02/20] ide: use PageHighMem() instead of ifdefs in ide_pio_bytes() Bartlomiej Zolnierkiewicz
2009-02-16 0:13 ` [PATCH 03/20] ide-cd: remove dead URLs Bartlomiej Zolnierkiewicz
2009-02-16 0:13 ` [PATCH 04/20] ide-cd: use ide_end_rq() also for failed non-fs requests Bartlomiej Zolnierkiewicz
2009-02-16 0:13 ` [PATCH 05/20] ide-cd: remove dead code from cdrom_decode_status() Bartlomiej Zolnierkiewicz
2009-02-16 0:13 ` [PATCH 06/20] ide: remove needless ide_dump_status_no_sense() wrapper Bartlomiej Zolnierkiewicz
2009-02-16 0:13 ` [PATCH 07/20] ide-cd: remove no longer needed 'ignore' module parameter Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 08/20] ide-cd: factor out failed request completion from cdrom_end_request() Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 09/20] ide-cd: unify ide_cd_do_request() exit paths Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 10/20] ide-cd: move setting REQ_FAILED flag out from 'end_request' exit path Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths Bartlomiej Zolnierkiewicz
2009-02-16 9:25 ` Borislav Petkov [this message]
2009-02-16 21:09 ` Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 12/20] ide-cd: remove cdrom_end_request() Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 13/20] ide-cd: kill whole failed request in ide_cd_do_request() Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 14/20] ide-cd: cleanup ide_cd_do_request() Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 15/20] ide-cd: use scatterlists for PIO transfers (fs requests) Bartlomiej Zolnierkiewicz
2009-02-16 0:14 ` [PATCH 16/20] ide-cd: fix non-SECTOR_SIZE-multiples PIO transfers for fs requests Bartlomiej Zolnierkiewicz
2009-02-16 0:15 ` [PATCH 17/20] ide-cd: merge ide_cd_prepare_rw_request() into cdrom_start_rw() Bartlomiej Zolnierkiewicz
2009-02-16 0:15 ` [PATCH 18/20] ide-cd: use scatterlists for PIO transfers (non-fs requests) Bartlomiej Zolnierkiewicz
2009-02-16 0:15 ` [PATCH 19/20] ide-cd: use common completion path for DMA requests in cdrom_newpc_intr() Bartlomiej Zolnierkiewicz
2009-02-16 0:15 ` [PATCH 20/20] ide-cd: unify transfer padding " Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090216092501.GA24323@gollum.tnic \
--to=petkovbb@googlemail.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®