From: Steven King <sfking@fdwdc.com>
To: uClinux development list <uclinux-dev@uclinux.org>
Cc: linux-kernel@vger.kernel.org, Greg Ungerer <gerg@snapgear.com>
Subject: [RFC 05/14] Coldfire generic GPIO (m68knommu)
Date: Wed, 11 Mar 2009 13:55:56 -0800 [thread overview]
Message-ID: <200903111455.56840.sfking@fdwdc.com> (raw)
Signed-off-by: Steven King <sfking@fdwdc.com>
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index bf39731..d06dd22 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -41,5 +41,82 @@
#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
+#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
+#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
+#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
+#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003)
+#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006)
+#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007)
+#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009)
+#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B)
+#define MCFGPIO_PODR_ETPU (MCF_IPSBAR + 0x10000C)
+
+#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018)
+#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019)
+#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A)
+#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B)
+#define MCFGPIO_PDDR_ETPU (MCF_IPSBAR + 0x10001C)
+
+#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022)
+#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023)
+#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025)
+#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B)
+#define MCFGPIO_PPDSDR_ETPU (MCF_IPSBAR + 0x10002C)
+
+#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034)
+#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035)
+#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036)
+#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037)
+#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038)
+#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039)
+#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A)
+#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B)
+#define MCFGPIO_PCLRR_ETPU (MCF_IPSBAR + 0x10003C)
+
+/*
+ * EPort
+ */
+
+#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004)
+#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR
+
+#define MCFGPIO_PIN_MAX 107
+#define MCFGPIO_IRQ_MAX 8
+#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+
/****************************************************************************/
#endif /* m523xsim_h */
reply other threads:[~2009-03-11 21:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200903111455.56840.sfking@fdwdc.com \
--to=sfking@fdwdc.com \
--cc=gerg@snapgear.com \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome