[PATCH 10/10] OMAP: HSMMC: Wait for SDBP

[Adrian Hunter <adrian.hunter@nokia.com>]

>From e543f7849ab668fa0cbabc048e37e090e7b6f167 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Thu, 12 Mar 2009 17:08:26 +0200
Subject: [PATCH] OMAP: HSMMC: Wait for SDBP

It is necessary to wait for bus power before sending
any commands.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---
 drivers/mmc/host/omap_hsmmc.c |   20 +++++++++++++++-----
 1 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 91381f4..2f444c8 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -546,6 +546,19 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void set_sd_bus_power(struct mmc_omap_host *host)
+{
+	unsigned long i;
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+			 OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+	for (i = 0; i < loops_per_jiffy; i++) {
+		if (OMAP_HSMMC_READ(host->base, HCTL) & SDBP)
+			break;
+		cpu_relax();
+	}
+}
+
 /*
  * Switch MMC interface voltage ... only relevant for MMC1.
  *
@@ -602,9 +615,7 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
 		reg_val |= SDVS30;
 
 	OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
-
-	OMAP_HSMMC_WRITE(host->base, HCTL,
-		OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+	set_sd_bus_power(host);
 
 	return 0;
 err:
@@ -997,8 +1008,7 @@ static void omap_hsmmc_init(struct mmc_omap_host *host)
 	OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE);
 
 	/* Set SD bus power bit */
-	value = OMAP_HSMMC_READ(host->base, HCTL);
-	OMAP_HSMMC_WRITE(host->base, HCTL, value | SDBP);
+	set_sd_bus_power(host);
 }
 
 static struct mmc_host_ops mmc_omap_ops = {
-- 
1.5.6.3