From: Yasunori Goto <y-goto@jp.fujitsu.com>
To: clemens@ladisch.de
Cc: Linux Kernel ML <linux-kernel@vger.kernel.org>,
robert.picco@hp.com, venkatesh.pallipadi@intel.com,
vojtech@suse.cz, mingo@redhat.com
Subject: [Patch] Fix the possibility of insane return value of hpet_calibrate() against SMI.
Date: Fri, 13 Mar 2009 14:00:40 +0900 [thread overview]
Message-ID: <20090313134846.24B6.E1E9C6FF@jp.fujitsu.com> (raw)
Hello.
I think there is a possibility that HPET driver will return
insane value due to a SMI interruption (or switching guests by hypervisor).
I found it by reviewing, and I would like to fix it.
Current HPET driver calibrates the adjustment value
by calculation the elapse time in CPU busy loop.
However this way is too dangerous against SMI interruption.
Here is the calibration code in hpet_calibrate()
701 static unsigned long hpet_calibrate(struct hpets *hpetp)
:
:
728 do {
729 m = read_counter(&hpet->hpet_mc);
730 write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
731 } while (i++, (m - start) < count);
732
733 local_irq_restore(flags);
734
735 return (m - start) / i;
If SMI interruption occurs between 728 to 731, then return value will be
bigger value than correct one. (SMI is not able to be controlled by OS.)
This patch is a simple solution to fix it.
hpet_calibrate() is called 5 times, and one of them is expected as
correct value.
Thanks.
---
hpet_calibrate() has a possibility of miss-calibration due to SMI.
If SMI interrupts in the while loop of calibration, then return value
will be big. This changes it tries 5 times and get minimum value as
correct value.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
---
Index: hpet_test/drivers/char/hpet.c
===================================================================
--- hpet_test.orig/drivers/char/hpet.c 2008-12-04 16:24:02.000000000 +0900
+++ hpet_test/drivers/char/hpet.c 2008-12-04 16:34:59.000000000 +0900
@@ -713,7 +713,7 @@
*/
#define TICK_CALIBRATE (1000UL)
-static unsigned long hpet_calibrate(struct hpets *hpetp)
+static unsigned long __hpet_calibrate(struct hpets *hpetp)
{
struct hpet_timer __iomem *timer = NULL;
unsigned long t, m, count, i, flags, start;
@@ -750,6 +750,17 @@
return (m - start) / i;
}
+static unsigned long hpet_calibrate(struct hpets *hpetp)
+{
+ unsigned long ret = ~0UL, i;
+
+ /* Try 5 times to remove impact of SMI.*/
+ for (i = 0; i < 5; i++)
+ ret = min(ret, __hpet_calibrate(hpetp));
+
+ return ret;
+}
+
int hpet_alloc(struct hpet_data *hdp)
{
u64 cap, mcfg;
--
Yasunori Goto
next reply other threads:[~2009-03-13 5:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-13 5:00 Yasunori Goto [this message]
2009-03-14 8:23 ` Rik van Riel
2009-03-15 19:56 ` Paul Gortmaker
2009-03-16 2:34 ` Yasunori Goto
2009-03-16 8:59 ` Vojtech Pavlik
2009-03-16 9:52 ` Clemens Ladisch
2009-03-17 10:12 ` Yasunori Goto
2009-03-17 13:12 ` Paul Gortmaker
2009-03-18 0:45 ` Yasunori Goto
2009-03-18 2:47 ` [Patch] Fix the possibility of insane return value of hpet_calibrate() against SMI. (take 2) Yasunori Goto
2009-03-18 7:44 ` Clemens Ladisch
2009-03-18 8:25 ` Vojtech Pavlik
2009-03-18 13:55 ` Paul Gortmaker
2009-03-18 15:11 ` Clemens Ladisch
2009-03-18 15:32 ` Paul Gortmaker
2009-03-30 21:06 ` Andrew Morton
2009-03-30 21:23 ` Paul Gortmaker
-- strict thread matches above, loose matches on Subject: below --
2008-12-04 10:34 [Patch] Fix the possibility of insane return value of hpet_calibrate() against SMI Yasunori Goto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090313134846.24B6.E1E9C6FF@jp.fujitsu.com \
--to=y-goto@jp.fujitsu.com \
--cc=clemens@ladisch.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=robert.picco@hp.com \
--cc=venkatesh.pallipadi@intel.com \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®