Re: Bug in 2.6.29 ide-cd: Kernel freeze: bisected + unacceptable workaround

[Borislav Petkov <petkovbb@googlemail.com>]

Hi Michael,

On Sun, Mar 29, 2009 at 11:37:40PM +0200, Michael Roth wrote:
> Hello Borislav,
> 
> thank you for your help.
> 
> Borislav Petkov schrieb:
> 
> >  Can we please see a dmesg of a working
> > kernel on your machine
> 
> Sure, dmesg output appended beneath. I also added the dmesg output
> of the patched kernel. See below.
> 
> 
> > and also is it possible to catch any kernel output of the crash
> > any oops or something when your machine freezes - the more the better.
> 
> There aren't any messages, neither on the console nor in the syslog.
> The kernel simple freeze, cursor on the console stops blinking, no
> more ide activity. I have to hit the reset-bottom to restart.
> 
> 
> > Probably over a serial console would be best but photographed
> > with a digicam and uploaded somewhere as a screenshot would do too.
> 
> I will do that on request, but it will take some time (about days)
> because currently I don't have access to a second computer or so.

That'll definitely be very helpful since I wanna know exactly why it
locks up. If you still have no output it'd be cool if you could enable
ide-cd debugging and retry catching the output. Here's a patch for that,
just recompile and reboot (I admit this is not one of the finest ways to
enable debugging but since this is work in progress...:) ):

--
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index e9d042d..4ef3b7e 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -8,6 +8,8 @@
 #include <linux/ide.h>
 #include <scsi/scsi.h>
 
+#define DEBUG 1
+
 #ifdef DEBUG
 #define debug_log(fmt, args...) \
 	printk(KERN_INFO "ide: " fmt, ## args)
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index ddfbea4..ea36295 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1991,7 +1991,7 @@ static int ide_cd_probe(ide_drive_t *drive)
 		}
 	}
 
-	drive->debug_mask = debug_mask;
+	drive->debug_mask = 0xffffffff;
 	drive->irq_handler = cdrom_newpc_intr;
 
 	info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index c878bfc..225afca 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -8,7 +8,7 @@
 #include <linux/cdrom.h>
 #include <asm/byteorder.h>
 
-#define IDECD_DEBUG_LOG		0
+#define IDECD_DEBUG_LOG		1
 
 #if IDECD_DEBUG_LOG
 #define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)

> > You could also try the following patch to see whether that is of any
> > help:
> 
> Your patch helps perfectly. I'm writing this email on the patched
> 2.6.29. I also tested CD and DVD access: They work well. Burning not
> tested but I assume it will work too.

@Bart: can you take at look at this. Somehow, if the device is behind a
PCI IDE controller, the order of issuing the command and enabling DMA is
important. Seen something like that before?

> Probing IDE interface ide2...
> hde: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive
> hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hde: UDMA/66 mode selected
> Probing IDE interface ide3...
> ide2 at 0xa400-0xa407,0xa802 on irq 18
> ide3 at 0xac00-0xac07,0xb002 on irq 18
> via82cxxx 0000:00:11.1: VIA vt8235 (rev 00) IDE UDMA133
> via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06)
> ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
> ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
> VIA_IDE 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
> via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xc400-0xc407
>     ide1: BM-DMA at 0xc408-0xc40f
> Probing IDE interface ide0...
> hda: SAMSUNG HD400LD, ATA DISK drive
> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/100 mode selected
> Probing IDE interface ide1...
> hdc: SAMSUNG HD400LD, ATA DISK drive
> hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> hdc: UDMA/100 mode selected
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> ide-gd driver 1.18
> hda: max request size: 512KiB
> hda: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63
> hda: cache flushes supported
>  hda: hda1 hda2 hda3 hda4
> hdc: max request size: 512KiB
> hdc: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63
> hdc: cache flushes supported
>  hdc: hdc1 hdc2 hdc3 hdc4
> ide-cd driver 5.00
> ide-cd: hde: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20

-- 
Regards/Gruss,
    Boris.