From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>, kernel@avr32linux.org
Subject: [GIT PULL] AVR32 update
Date: Sat, 4 Apr 2009 11:33:27 +0200 [thread overview]
Message-ID: <20090404113327.30d7f1aa@hskinnemoen-d830> (raw)
Hi Linus,
Please pull
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6.git avr32-arch
to receive the following updates. This includes support for a new
board, as well as platform glue for two new drivers that went in
through the ALSA tree.
Haavard Skinnemoen (1):
Merge branch 'master' of git://git.kernel.org/.../torvalds/linux-2.6 into avr32-arch
Hans-Christian Egtvedt (10):
avr32: fix 15-bit LCDC pin mask to use MSB lines
avr32: add pin mask for 18-bit color on the LCD controller
avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards
avr32: configure MCI detect and write protect pins for EVKLCD10x boards
avr32: use GPIO line PB15 on EVKLCD10x boards for backlight
avr32: fix timing LCD parameters for EVKLCD10X boards
atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line
avr32: use gpio_is_valid() to check USBA vbus_pin I/O line
avr32: at32ap700x: setup DMA for ABDAC in the machine code
avr32: at32ap700x: setup DMA for AC97C in the machine code
Jonas Larsson (2):
Add Merisc board support
Add RTC support for Merisc boards
Peter Ma (2):
avr32: add RTS/CTS/CLK pin selection for the USARTs
avr32: add hardware handshake support to atmel_serial
arch/avr32/Kconfig | 14 +
arch/avr32/Makefile | 1 +
arch/avr32/boards/atngw100/evklcd10x.c | 50 +-
arch/avr32/boards/atngw100/setup.c | 7 +-
arch/avr32/boards/atstk1000/atstk1002.c | 6 +-
arch/avr32/boards/atstk1000/atstk1003.c | 6 +-
arch/avr32/boards/atstk1000/atstk1004.c | 6 +-
arch/avr32/boards/favr-32/setup.c | 9 +-
arch/avr32/boards/hammerhead/setup.c | 6 +-
arch/avr32/boards/merisc/Kconfig | 5 +
arch/avr32/boards/merisc/Makefile | 1 +
arch/avr32/boards/merisc/display.c | 65 ++
arch/avr32/boards/merisc/flash.c | 139 +++
arch/avr32/boards/merisc/merisc.h | 18 +
arch/avr32/boards/merisc/merisc_sysfs.c | 65 ++
arch/avr32/boards/merisc/setup.c | 297 ++++++
arch/avr32/boards/mimc200/setup.c | 8 +-
arch/avr32/configs/merisc_defconfig | 1237 ++++++++++++++++++++++
arch/avr32/mach-at32ap/at32ap700x.c | 112 ++-
arch/avr32/mach-at32ap/include/mach/at32ap700x.h | 52 +-
arch/avr32/mach-at32ap/include/mach/board.h | 24 +-
drivers/serial/atmel_serial.c | 9 +-
drivers/usb/gadget/atmel_usba_udc.c | 14 +-
23 files changed, 2049 insertions(+), 102 deletions(-)
create mode 100644 arch/avr32/boards/merisc/Kconfig
create mode 100644 arch/avr32/boards/merisc/Makefile
create mode 100644 arch/avr32/boards/merisc/display.c
create mode 100644 arch/avr32/boards/merisc/flash.c
create mode 100644 arch/avr32/boards/merisc/merisc.h
create mode 100644 arch/avr32/boards/merisc/merisc_sysfs.c
create mode 100644 arch/avr32/boards/merisc/setup.c
create mode 100644 arch/avr32/configs/merisc_defconfig
next reply other threads:[~2009-04-04 9:34 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-04 9:33 Haavard Skinnemoen [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-06-13 14:14 Haavard Skinnemoen
2009-03-24 8:35 Haavard Skinnemoen
2008-10-12 15:02 [GIT PULL] avr32 update Haavard Skinnemoen
2008-04-20 1:09 [GIT PULL] AVR32 update Haavard Skinnemoen
2008-01-25 13:07 Haavard Skinnemoen
2007-08-15 14:57 Haavard Skinnemoen
2007-07-18 19:16 Haavard Skinnemoen
2007-05-16 9:27 Haavard Skinnemoen
2007-05-09 8:48 Haavard Skinnemoen
2007-04-27 14:09 Haavard Skinnemoen
2007-02-16 15:39 Haavard Skinnemoen
2007-02-09 14:57 Haavard Skinnemoen
2006-12-08 12:28 Haavard Skinnemoen
2006-11-06 13:38 [GIT PULL] avr32 update Haavard Skinnemoen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090404113327.30d7f1aa@hskinnemoen-d830 \
--to=haavard.skinnemoen@atmel.com \
--cc=kernel@avr32linux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®