From: Balbir Singh <balbir@linux.vnet.ibm.com>
To: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
Christoph Lameter <cl@linux-foundation.org>,
Vivek Kashyap <vivk@us.ibm.com>,
Mel Gorman <mel@linux.vnet.ibm.com>,
Balbir Singh <balbir@linux.vnet.ibm.com>,
Robert MacFarlan <Robert_MacFarlan@us.ibm.com>
Subject: Re: Large Pages - Linux Foundation HPC
Date: Tue, 21 Apr 2009 23:55:55 +0530 [thread overview]
Message-ID: <20090421182555.GA8977@balbir.in.ibm.com> (raw)
In-Reply-To: <1240333025.32604.392.camel@nimitz>
[Fix my email address to balbir@linux.vnet.ibm.com]
* Dave Hansen <dave@linux.vnet.ibm.com> [2009-04-21 09:57:05]:
> On Tue, 2009-04-21 at 09:32 -0700, Badari Pulavarty wrote:
> > Hi Dave,
> >
> > On the Linux foundation HPC track summary, I saw:
> >
> > -- Memory and interface to it - mapping memory into apps
> > - large pages important - current state not good enough
>
> I'm not sure exactly what this means. But, there was continuing concern
> about large page interfaces. hugetlbfs is fine, but it still requires
> special tools, planning, and requires some modification of the app. We
> can modify it with linker tricks or with LD_PRELOAD, but those certainly
> don't work everywhere. I was told over and over again that hugetlbfs
> isn't a sufficient interface for large pages, no matter how much
> userspace we try to stick in front of it.
>
> Some of their apps get a 6-7x speedup from large pages!
>
> Fragmentation also isn't an issue for a big chunk of the users since
> they reboot between each job.
>
> > nodes going down due to memory exhaustion
>
> Virtually all the apps in an HPC environment start up try to use all the
> memory they can get their hands on. With strict overcommit on, that
> probably means brk() or mmap() until they fail. They also usually
> mlock() anything they're able to allocate. Swapping is the devil to
> them. :)
>
> Basically, what all the apps do is a recipe for stressing the VM and
> triggering the OOM killer. Most of the users simply hack the kernel and
> replace the OOM killer with one that fits their needs. Some have an
> attitude that "the user's app should never die" and others "the user
> caused this, so kill their app". Basically, there's no way to make
> everyone happy since they have conflicting requirements. But, this is
> true of the kernel in general... nothing special here.
OOM killer has been a hot topic. Have you seen Dan Malek's patches at
http://lkml.org/lkml/2009/4/13/276.
>
> The split LRU should help things. It will at least make our memory
> scanning more efficient and ensure we're making more efficient reclaim
> progress. I'm not sure that anyone there knew about the oom_adjust and
> oom_score knobs in /proc. They do now. :)
:-)
>
> One of my suggestions was to use the memory resource controller. They
> could give each app 95% (or whatever) of the system. This should let
> them keep their current "consume all memory" behavior, but stop them at
> sane limits.
>
Soft limits should help as well, basically we are trying to allow
unrestricted memory access until there is contention. The patches are
still under development.
> That leads into another issue, which is the "wedding cake" software
> stack. There are a lot of software dependencies both in and out of the
> kernel. It is hard to change individual components, especially in the
> lower levels. This leads many of the users to use old (think 2.6.9)
> kernels. Nobody runs mainline, of course.
>
> Then, there's Lustre. Everybody uses it, it's definitely a big hunk of
> the "wedding cake". I haven't seen any LKML postings on it in years and
> I really wonder how it interacts with the VM. No idea.
>
> There's a "Hyperion cluster" which is for testing new HPC software on a
> decently sized cluster. One suggestion of ours was to try and get
> mainline tested on this every so often to look for regressions since
> we're not able to glean feedback from 2.6.9 kernel users. We'll see
> where that goes.
>
> > checkpoint/restart
>
> Many of the MPI implementations have mechanisms in userspace for
> checkpointing of user jobs. Most cluster administrators instruct their
> users to use these mechanisms. Some do. Most don't.
>
Good inputs and summary. Thanks!
--
Balbir
next prev parent reply other threads:[~2009-04-21 18:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-21 16:32 Badari Pulavarty
2009-04-21 16:57 ` Dave Hansen
2009-04-21 18:25 ` Balbir Singh [this message]
2009-04-25 8:48 ` Wu Fengguang
2009-04-26 6:54 ` Dave Hansen
2009-04-27 14:12 ` Christoph Lameter
2009-04-28 3:15 ` Wu Fengguang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090421182555.GA8977@balbir.in.ibm.com \
--to=balbir@linux.vnet.ibm.com \
--cc=Robert_MacFarlan@us.ibm.com \
--cc=cl@linux-foundation.org \
--cc=dave@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mel@linux.vnet.ibm.com \
--cc=pbadari@us.ibm.com \
--cc=vivk@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome