Re: [PATCH] mmc_spi: do propper retry managment in the block layer

["Wolfgang Mües" <wolfgang.mues@auerswald.de>]

Pierre,

Am Dienstag, 28. April 2009 schrieb Pierre Ossman:
> You're wrong in that EINVAL should not be sent for any kind of runtime
> hardware errors like that. But I might have missed some instances during
> reviews, so there might be drivers that give that error message for
> things they shouldn't.

I checked the drivers sourcecode and found that most drivers are using EINVAL 
for non-recoverable parameter errors.

The only driver which uses EINVAL for errors which might result from 
transmission failures is mmc_spi.

So I think it would be OK to use another error code in mmc_spi for these 
cases:

 * EILSEQ       Basic format problem with the received or sent data
 *              (e.g. CRC check failed, incorrect opcode in response
 *              or bad end bit)

Would you accept a patch to report another error code in mmc_spi?

regards

i. A. Wolfgang Mües
-- 
Auerswald GmbH & Co. KG
Hardware Development
Telefon: +49 (0)5306 9219 0
Telefax: +49 (0)5306 9219 94 
E-Mail: Wolfgang.Mues@Auerswald.de
Web: http://www.auerswald.de
 
--------------------------------------------------------------
Auerswald GmbH & Co. KG, Vor den Grashöfen 1, 38162 Cremlingen
Registriert beim AG Braunschweig HRA 13289
p.h.G Auerswald Geschäftsführungsges. mbH
Registriert beim AG Braunschweig HRB 7463
Geschäftsführer: Dipl-Ing. Gerhard Auerswald