From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757561AbZFDOla (ORCPT ); Thu, 4 Jun 2009 10:41:30 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754940AbZFDOlX (ORCPT ); Thu, 4 Jun 2009 10:41:23 -0400 Received: from atrey.karlin.mff.cuni.cz ([195.113.26.193]:52079 "EHLO atrey.karlin.mff.cuni.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754617AbZFDOlW (ORCPT ); Thu, 4 Jun 2009 10:41:22 -0400 Date: Thu, 4 Jun 2009 16:41:18 +0200 From: Pavel Machek To: Trivial patch monkey , kernel list Subject: Kconfig: .ko is normally not included in module names, make it consistent Message-ID: <20090604144118.GA30487@elf.ucw.cz> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit X-Warning: Reading this can be dangerous to your mental health. User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org .ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek --- commit 67bab97b212ed399459e2babf8268b5411c28dff tree 9e8645c55ada7e6518cd6a1749764daada7f8376 parent 7ca0c98aa0bc0d6d3c27ab40e1ca4021a72b960d author Pavel Thu, 04 Jun 2009 16:40:29 +0200 committer Pavel Thu, 04 Jun 2009 16:40:29 +0200 arch/blackfin/Kconfig | 2 +- drivers/block/Kconfig | 2 +- drivers/char/Kconfig | 2 +- drivers/connector/Kconfig | 2 +- drivers/ide/Kconfig | 2 +- drivers/media/dvb/dvb-usb/Kconfig | 2 +- drivers/mtd/devices/Kconfig | 2 +- drivers/mtd/nand/Kconfig | 4 ++-- drivers/net/Kconfig | 4 ++-- drivers/net/wireless/Kconfig | 2 +- drivers/net/wireless/iwlwifi/Kconfig | 4 ++-- drivers/w1/Kconfig | 2 +- drivers/w1/masters/Kconfig | 6 +++--- drivers/watchdog/Kconfig | 2 +- net/ipv6/Kconfig | 2 +- 15 files changed, 20 insertions(+), 20 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 3640cdc..bc9ce89 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -872,7 +872,7 @@ config BFIN_GPTIMERS are unsure, say N. To compile this driver as a module, choose M here: the module - will be called gptimers.ko. + will be called gptimers. choice prompt "Uncached DMA region" diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index ddea8e4..f2e5764 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -112,7 +112,7 @@ config GDROM with up to 1 GB of data. This drive will also read standard CD ROM disks. Select this option to access any disks in your GD ROM drive. Most users will want to say "Y" here. - You can also build this as a module which will be called gdrom.ko + You can also build this as a module which will be called gdrom. source "drivers/block/paride/Kconfig" diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 735bbe2..73e85ad 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -679,7 +679,7 @@ config HVCS this driver. To compile this driver as a module, choose M here: the - module will be called hvcs.ko. Additionally, this module + module will be called hvcs. Additionally, this module will depend on arch specific APIs exported from hvcserver.ko which will also be compiled when this driver is built as a module. diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig index 100bfd4..6e6730f 100644 --- a/drivers/connector/Kconfig +++ b/drivers/connector/Kconfig @@ -7,7 +7,7 @@ menuconfig CONNECTOR of the netlink socket protocol. Connector support can also be built as a module. If so, the module - will be called cn.ko. + will be called cn. if CONNECTOR diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cf06494..9a5d0aa 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -46,7 +46,7 @@ menuconfig IDE SMART parameters from disk drives. To compile this driver as a module, choose M here: the - module will be called ide-core.ko. + module will be called ide-core. For further information, please read . diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 60955a7..1bb66e1 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -216,7 +216,7 @@ config DVB_USB_TTUSB2 help Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The firmware protocol used by this module is similar to the one used by the - old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko. + old ttusb-driver - that's why the module is called dvb-usb-ttusb2. config DVB_USB_DTT200U tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 6fde0a2..325fab9 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -49,7 +49,7 @@ config MTD_MS02NV If you want to compile this driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . - The module will be called ms02-nv.ko. + The module will be called ms02-nv. config MTD_DATAFLASH tristate "Support for AT45xxx DataFlash" diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 890936d..f327689 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE help This enables the driver for the NAND flash device found on the Basler eXcite Smart Camera. If built as a module, the driver - will be named "excite_nandflash.ko". + will be named excite_nandflash. config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" @@ -282,7 +282,7 @@ config MTD_NAND_CS553X controller is enabled for NAND, and currently requires that the controller be in MMIO mode. - If you say "m", the module will be called "cs553x_nand.ko". + If you say "m", the module will be called cs553x_nand. config MTD_NAND_ATMEL tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32" diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 214a92d..b4683ce 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1880,7 +1880,7 @@ config FEC_MPC52xx ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller - If compiled as module, it will be called 'fec_mpc52xx.ko'. + If compiled as module, it will be called fec_mpc52xx. config FEC_MPC52xx_MDIO bool "MPC52xx FEC MDIO bus driver" @@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO (Motorola? industry standard). If your board uses an external PHY connected to FEC, enable this. If not sure, enable. - If compiled as module, it will be called 'fec_mpc52xx_phy.ko'. + If compiled as module, it will be called fec_mpc52xx_phy. config NE_H8300 tristate "NE2000 compatible support for H8/300" diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 8a08235..25b56d2 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -310,7 +310,7 @@ config PRISM54 If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . - The module will be called prism54.ko. + The module will be called prism54. config USB_ZD1201 tristate "USB ZD1201 based Wireless device support" diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 8304f64..7361623 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -75,7 +75,7 @@ config IWLAGN If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . The - module will be called iwlagn.ko. + module will be called iwlagn. config IWL4965 @@ -113,7 +113,7 @@ config IWL3945 If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . The - module will be called iwl3945.ko. + module will be called iwl3945. config IWL3945_SPECTRUM_MEASUREMENT bool "Enable Spectrum Measurement in iwl3945 driver" diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index 9adbb4f..fd2c7bd 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -8,7 +8,7 @@ menuconfig W1 If you want W1 support, you should say Y here. This W1 support can also be built as a module. If so, the module - will be called wire.ko. + will be called wire. if W1 diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index 96d2f8e..3195fb8 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -12,7 +12,7 @@ config W1_MASTER_MATROX using Matrox's G400 GPIO pins. This support is also available as a module. If so, the module - will be called matrox_w1.ko. + will be called matrox_w1. config W1_MASTER_DS2490 tristate "DS2490 USB <-> W1 transport layer for 1-wire" @@ -22,7 +22,7 @@ config W1_MASTER_DS2490 for example DS9490*. This support is also available as a module. If so, the module - will be called ds2490.ko. + will be called ds2490. config W1_MASTER_DS2482 tristate "Maxim DS2482 I2C to 1-Wire bridge" @@ -56,7 +56,7 @@ config W1_MASTER_GPIO GPIO pins. This driver uses the GPIO API to control the wire. This support is also available as a module. If so, the module - will be called w1-gpio.ko. + will be called w1-gpio. config HDQ_MASTER_OMAP tristate "OMAP HDQ driver" diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 5eb8f21..452082f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -531,7 +531,7 @@ config SBC8360_WDT Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). To compile this driver as a module, choose M here: the - module will be called sbc8360.ko. + module will be called sbc8360. Most people will say N. diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index ca8cb32..ead6c7a 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -168,7 +168,7 @@ config IPV6_SIT into IPv4 packets. This is useful if you want to connect two IPv6 networks over an IPv4-only path. - Saying M here will produce a module called sit.ko. If unsure, say Y. + Saying M here will produce a module called sit. If unsure, say Y. config IPV6_NDISC_NODETYPE bool -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html