From: Jean Delvare <khali@linux-fr.org>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-kernel@vger.kernel.org
Subject: [TRIVIAL PATCH] Typo: ETIMEOUT -> ETIMEDOUT
Date: Thu, 4 Jun 2009 16:20:28 +0200 [thread overview]
Message-ID: <20090604162028.7919ff89@hyperion.delvare> (raw)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
arch/arm/mach-sa1100/jornada720_ssp.c | 4 ++--
drivers/net/qlge/qlge_main.c | 2 +-
drivers/net/usb/usbnet.c | 2 +-
drivers/staging/wlan-ng/hfa384x_usb.c | 2 +-
kernel/rtmutex.c | 2 +-
5 files changed, 6 insertions(+), 6 deletions(-)
--- linux-2.6.30-rc8.orig/arch/arm/mach-sa1100/jornada720_ssp.c 2009-03-24 13:40:33.000000000 +0100
+++ linux-2.6.30-rc8/arch/arm/mach-sa1100/jornada720_ssp.c 2009-06-04 15:32:23.000000000 +0200
@@ -54,7 +54,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
* timeout after <timeout> rounds. Needs mcu running before its called.
*
* returns : %mcu output on success
- * : %-ETIMEOUT on timeout
+ * : %-ETIMEDOUT on timeout
*/
int jornada_ssp_byte(u8 byte)
{
@@ -82,7 +82,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
* jornada_ssp_inout - decide if input is command or trading byte
*
* returns : (jornada_ssp_byte(byte)) on success
- * : %-ETIMEOUT on timeout failure
+ * : %-ETIMEDOUT on timeout failure
*/
int jornada_ssp_inout(u8 byte)
{
--- linux-2.6.30-rc8.orig/drivers/net/qlge/qlge_main.c 2009-04-08 08:53:10.000000000 +0200
+++ linux-2.6.30-rc8/drivers/net/qlge/qlge_main.c 2009-06-04 15:32:12.000000000 +0200
@@ -3174,7 +3174,7 @@ static int ql_adapter_reset(struct ql_ad
if (value & RST_FO_FR) {
QPRINTK(qdev, IFDOWN, ERR,
- "ETIMEOUT!!! errored out of resetting the chip!\n");
+ "ETIMEDOUT!!! errored out of resetting the chip!\n");
status = -ETIMEDOUT;
}
--- linux-2.6.30-rc8.orig/drivers/net/usb/usbnet.c 2009-04-08 08:53:12.000000000 +0200
+++ linux-2.6.30-rc8/drivers/net/usb/usbnet.c 2009-06-04 15:32:03.000000000 +0200
@@ -398,7 +398,7 @@ static void rx_complete (struct urb *urb
/* stalls need manual reset. this is rare ... except that
* when going through USB 2.0 TTs, unplug appears this way.
- * we avoid the highspeed version of the ETIMEOUT/EILSEQ
+ * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
* storm, recovering as needed.
*/
case -EPIPE:
--- linux-2.6.30-rc8.orig/drivers/staging/wlan-ng/hfa384x_usb.c 2009-04-08 08:53:33.000000000 +0200
+++ linux-2.6.30-rc8/drivers/staging/wlan-ng/hfa384x_usb.c 2009-06-04 15:31:47.000000000 +0200
@@ -2424,7 +2424,7 @@ int hfa384x_drvr_ramdl_write(hfa384x_t *
* 0 success
* >0 f/w reported error - f/w status code
* <0 driver reported error
-* -ETIMEOUT timout waiting for the cmd regs to become
+* -ETIMEDOUT timout waiting for the cmd regs to become
* available, or waiting for the control reg
* to indicate the Aux port is enabled.
* -ENODATA the buffer does NOT contain a valid PDA.
--- linux-2.6.30-rc8.orig/kernel/rtmutex.c 2009-03-24 13:42:21.000000000 +0100
+++ linux-2.6.30-rc8/kernel/rtmutex.c 2009-06-04 15:31:40.000000000 +0200
@@ -875,7 +875,7 @@ EXPORT_SYMBOL_GPL(rt_mutex_lock_interrup
* Returns:
* 0 on success
* -EINTR when interrupted by a signal
- * -ETIMEOUT when the timeout expired
+ * -ETIMEDOUT when the timeout expired
* -EDEADLK when the lock would deadlock (when deadlock detection is on)
*/
int
--
Jean Delvare
next reply other threads:[~2009-06-04 14:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-04 14:20 Jean Delvare [this message]
2009-06-04 22:51 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090604162028.7919ff89@hyperion.delvare \
--to=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome