From: David VomLehn <dvomlehn@cisco.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@linux-foundation.org, linux-usb@vger.kernel.org,
greg@kroah.com, linux-scsi@vger.kernel.org,
netdev@vger.kernel.org, arjan@infradead.org
Subject: [PATCH 3/7] initdev:kernel:Await console discovery, v6
Date: Fri, 5 Jun 2009 19:34:07 -0700 [thread overview]
Message-ID: <20090606023407.GA5695@cuplxvomd02.corp.sa.net> (raw)
Wait for the console device to become available.
History
v6 Changed BOOTDEV_* to INITDEV_*.
v5.1 Corrected call to initdev_register() to be initdev_registered().
v5 Change bootdev_* to initdev_*.
v4 Use new hotplug synchronization infrastructure. Include Braille
console support.
v3.2 Use only a single new command line parameter by adding the possible
value "forever". Add message specifying the parameter to modify to
increase the delay for console initialization
v3.1 Correct the abbreviation for milliseconds in
Documentation/kernel-parameters.txt to be "ms", not "mS". Thanks to
Peter Anvin for this.
v3 Increase the default delay to 1 second and add kernel command line
parameters to override the default delay. Thanks to David Brownell for
his helpful suggestions.
v2 Wait for the preferred console rather than any console. Make the
delay interval a tunable.
v1 Initial version
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
---
drivers/accessibility/braille/braille_console.c | 2 +
kernel/printk.c | 29 ++++++++++++++++++++++-
2 files changed, 30 insertions(+), 1 deletions(-)
diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c
index d672cfe..6d1693f 100644
--- a/drivers/accessibility/braille/braille_console.c
+++ b/drivers/accessibility/braille/braille_console.c
@@ -378,6 +378,8 @@ int braille_register_console(struct console *console, int index,
braille_co = console;
register_keyboard_notifier(&keyboard_notifier_block);
register_vt_notifier(&vt_notifier_block);
+
+ initdev_registered(INITDEV_CONSOLE_TYPE);
return 0;
}
diff --git a/kernel/printk.c b/kernel/printk.c
index 5052b54..7cdc91c 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -33,6 +33,7 @@
#include <linux/bootmem.h>
#include <linux/syscalls.h>
#include <linux/kexec.h>
+#include <linux/device.h>
#include <asm/uaccess.h>
@@ -1075,8 +1076,10 @@ void console_unblank(void)
/*
* Return the console tty driver structure and its associated index
+ * @index: Pointer to the device index
+ * Returns NULL if no driver available, otherwise a pointer to the TTY driver.
*/
-struct tty_driver *console_device(int *index)
+struct tty_driver *_console_device(int *index)
{
struct console *c;
struct tty_driver *driver = NULL;
@@ -1094,6 +1097,29 @@ struct tty_driver *console_device(int *index)
}
/*
+ * Returns true if all specific consoles are registered, false otherwise
+ */
+static bool have_all_consoles(void)
+{
+ struct tty_driver *driver;
+ int index;
+
+ driver = _console_device(&index);
+
+ return driver != NULL;
+}
+
+struct tty_driver *console_device(int *index)
+{
+ struct tty_driver *driver;
+ initdev_wait(INITDEV_CONSOLE_TYPE, have_all_consoles);
+
+ driver = _console_device(index);
+
+ return driver;
+}
+
+/*
* Prevent further output on the passed console device so that (for example)
* serial drivers can disable console output before suspending a port, and can
* re-enable output afterwards.
@@ -1230,6 +1256,7 @@ void register_console(struct console *console)
spin_unlock_irqrestore(&logbuf_lock, flags);
}
release_console_sem();
+ initdev_registered(INITDEV_CONSOLE_TYPE);
}
EXPORT_SYMBOL(register_console);
next reply other threads:[~2009-06-06 2:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-06 2:34 David VomLehn [this message]
2009-06-06 8:55 ` Stefan Richter
2009-06-08 22:13 ` David VomLehn
2009-06-08 22:30 ` Stefan Richter
2009-06-08 22:34 ` David VomLehn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090606023407.GA5695@cuplxvomd02.corp.sa.net \
--to=dvomlehn@cisco.com \
--cc=akpm@linux-foundation.org \
--cc=arjan@infradead.org \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®