From: Pavel Machek <pavel@ucw.cz>
To: Marco <marco.stornelli@gmail.com>
Cc: tim.bird@am.sony.com, jamie@shareable.org,
Linux Embedded <linux-embedded@vger.kernel.org>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Linux FS Devel <linux-fsdevel@vger.kernel.org>,
Daniel Walker <dwalker@soe.ucsc.edu>
Subject: Re: [PATCH 00/14] Pramfs: Persistent and protected ram filesystem
Date: Wed, 24 Jun 2009 19:59:43 +0200 [thread overview]
Message-ID: <20090624175943.GB6618@elf.ucw.cz> (raw)
In-Reply-To: <4A42649D.6080509@gmail.com>
On Wed 2009-06-24 19:38:37, Marco wrote:
> >>> Pavel Machek wrote:
> >>>> On Mon 2009-06-22 14:50:01, Tim Bird wrote:
> >>>>> Pavel Machek wrote:
> >>>>>>> block of fast non-volatile RAM that need to access data on it using a
> >>>>>>> standard filesytem interface."
> >>>>>> Turns a block of fast RAM into 13MB/sec disk. Hmm. I believe you are
> >>>>>> better with ext2.
> >>>>> Not if you want the RAM-based filesystem to persist over a kernel
> >>>>> invocation.
> >>>> Yes, you'll need to code Persistent, RAM-based _block_device_.
> >>> First of all I have to say that I'd like to update the site and make it
> >>> clearer but at the moment it's not possible because I'm not the admin
> >>> and I've already asked to the sourceforge support to have this possibility.
> >>>
> >>> About the comments: sincerely I don't understand the comments. We have
> >>> *already* a fs that takes care to remap a piace of ram (ram, sram,
> >>> nvram, etc.), takes care of caching problems, takes care of write
> >> Well, it looks pramfs design is confused. 13MB/sec shows that caching
> >> _is_ useful for pramfs. So...?
> >
> > caching problems means to avoid filesystem corruption, so dirty pages in
> > the page cache are not allowed to be written back to the backing-store
> > RAM. It's clear that there is a performance penalty. This penalty should
> > be reduced by the access speed of the RAM, however the performance are
> > not important for this special fs as Tim Bird said, so this question is
> > not relevant for me. If this issue is not clear enough on the web site,
> > I hope I can update the information in the future.
> >
> >>> You are talked about journaling. This schema works well for a disk, but
> >>> what about a piece of ram? What about a crazy kernel that write in that
> >>> area for a bug? Do you remember for example the e1000e bug? It's not
> >> I believe you need both journaling *and* write protection. How do you
> >> handle power fault while writing data?
> >> Pavel
> >
> > Ah now the write protection is a "needed feature", in your previous
> > comment you talked about why not use ext2/3.......
> >
> > Marco
> >
>
> Just for your information I tried the same test with pc in a virtual machine with 32MB of RAM:
>
> Version 1.03e ------Sequential Output------ --Sequential Input- --Random-
> -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
> Machine Size:chnk K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
> hostname 15M:1k 14156 99 128779 100 92240 100 11669 100 166242 99 80058 82
> ------Sequential Create------ --------Random Create--------
> -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
> files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
> 4 2842 99 133506 104 45088 101 2787 99 79581 101 58212 102
>
> These data are the proof of the importance of the environment, workload and so on when we talk
> about benchmark. Your consideration are really superficial.
Unfortunately, your numbers are meaningless.
Pavel
(PCs should have cca 3GB/sec RAM transfer rates; and you demosstrated
cca 166MB/sec read rate; disk is 80MB/sec, so that's too slow. If you
want to prove your filesystem the filesystem is reasonably fast,
compare it with ext2 on ramdisk.)
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2009-06-24 18:00 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4a4254e2.09c5660a.109d.46f8@mx.google.com>
2009-06-24 16:49 ` Marco
2009-06-24 17:38 ` Marco
2009-06-24 17:59 ` Pavel Machek [this message]
2009-06-25 6:30 ` Marco Stornelli
2009-06-28 8:59 ` Pavel Machek
2009-06-28 16:44 ` Marco Stornelli
2009-06-28 17:33 ` Marco Stornelli
2009-07-09 23:42 ` Pavel Machek
2009-06-24 17:46 ` Pavel Machek
2009-06-13 13:20 Marco
2009-06-13 13:41 ` Daniel Walker
2009-06-13 15:59 ` Jamie Lokier
2009-06-14 7:15 ` Marco
2009-06-14 11:08 ` Artem Bityutskiy
2009-06-15 15:51 ` Bryan Henderson
2009-06-15 17:42 ` Marco
2009-06-14 11:46 ` Jamie Lokier
2009-06-14 16:04 ` Marco
2009-06-16 15:07 ` Jamie Lokier
2009-06-16 19:15 ` Marco
2009-06-24 17:41 ` Jamie Lokier
2009-06-25 6:44 ` Marco Stornelli
2009-06-26 11:30 ` Jamie Lokier
2009-06-26 16:56 ` Marco
2009-06-24 14:21 ` Pavel Machek
2009-06-21 6:40 ` Pavel Machek
2009-06-21 17:34 ` Marco
2009-06-21 20:52 ` Pavel Machek
2009-06-22 6:33 ` Marco Stornelli
2009-06-22 17:20 ` Pavel Machek
2009-06-22 17:31 ` Tim Bird
2009-06-22 17:37 ` Pavel Machek
2009-06-22 18:07 ` Marco
2009-06-22 20:40 ` Henrique de Moraes Holschuh
2009-06-22 20:40 ` Pavel Machek
2009-06-22 21:50 ` Tim Bird
2009-06-22 21:57 ` Pavel Machek
2009-06-22 22:38 ` Pavel Machek
2009-06-22 23:26 ` Chris Friesen
2009-06-23 1:42 ` David VomLehn
2009-06-23 18:07 ` Marco
2009-06-23 18:29 ` Pavel Machek
2009-06-24 17:47 ` Jamie Lokier
2009-06-25 6:32 ` Marco Stornelli
2009-06-22 18:55 ` Tim Bird
2009-06-22 21:02 ` Pavel Machek
2009-06-22 22:02 ` Tim Bird
2009-06-22 18:08 ` Marco
2009-06-15 17:15 ` Tim Bird
2009-06-15 17:44 ` Marco
2009-06-15 17:58 ` Tim Bird
2009-06-17 18:32 ` Chris Friesen
2009-06-18 6:35 ` Marco Stornelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090624175943.GB6618@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=dwalker@soe.ucsc.edu \
--cc=jamie@shareable.org \
--cc=linux-embedded@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marco.stornelli@gmail.com \
--cc=tim.bird@am.sony.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®