From: "Bruno Prémont" <bonbons@linux-vserver.org>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [Patch] Fix compile failure after genirq: Delegate irq affinity setting to the irq thread
Date: Wed, 22 Jul 2009 22:22:32 +0200 [thread overview]
Message-ID: <20090722222232.2eb3e1c4@neptune.home> (raw)
Since genirq: Delegate irq affinity setting to the irq thread
(591d2fb02ea80472d846c0b8507007806bdd69cc) compilation with
CONFIG_SMP=n fails with following error:
/usr/src/linux-2.6/kernel/irq/manage.c:
In function 'irq_thread_check_affinity':
/usr/src/linux-2.6/kernel/irq/manage.c:475:
error: 'struct irq_desc' has no member named 'affinity'
make[4]: *** [kernel/irq/manage.o] Error 1
That commit adds a new function irq_thread_check_affinity() which
uses struct irq_desc.affinity which is only available for CONFIG_SMP=y.
Move that function under #ifdef CONFIG_SMP.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
---
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index f0de36f..576638d 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -451,6 +451,7 @@ static int irq_wait_for_interrupt(struct irqaction *action)
return -1;
}
+#ifdef CONFIG_SMP
/*
* Check whether we need to change the affinity of the interrupt thread.
*/
@@ -478,6 +479,12 @@ irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
set_cpus_allowed_ptr(current, mask);
free_cpumask_var(mask);
}
+#else
+static inline void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction
*action) +{
+}
+#endif
/*
* Interrupt handler thread
---
Alternative patch which moves the new function irq_thread_check_affinity()
around so it is covered by already existing #ifdef CONFIG_SMP.
---
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index f0de36f..acf7922 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -190,11 +190,44 @@ int irq_select_affinity_usr(unsigned int irq)
return ret;
}
+/*
+ * Check whether we need to change the affinity of the interrupt thread.
+ */
+static void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
+{
+ cpumask_var_t mask;
+
+ if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
+ return;
+
+ /*
+ * In case we are out of memory we set IRQTF_AFFINITY again and
+ * try again next time
+ */
+ if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
+ set_bit(IRQTF_AFFINITY, &action->thread_flags);
+ return;
+ }
+
+ spin_lock_irq(&desc->lock);
+ cpumask_copy(mask, desc->affinity);
+ spin_unlock_irq(&desc->lock);
+
+ set_cpus_allowed_ptr(current, mask);
+ free_cpumask_var(mask);
+}
+
#else
static inline int setup_affinity(unsigned int irq, struct irq_desc *desc)
{
return 0;
}
+
+static inline void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
+{
+}
#endif
void __disable_irq(struct irq_desc *desc, unsigned int irq, bool suspend)
@@ -452,34 +485,6 @@ static int irq_wait_for_interrupt(struct irqaction *action)
}
/*
- * Check whether we need to change the affinity of the interrupt thread.
- */
-static void
-irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
-{
- cpumask_var_t mask;
-
- if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
- return;
-
- /*
- * In case we are out of memory we set IRQTF_AFFINITY again and
- * try again next time
- */
- if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
- set_bit(IRQTF_AFFINITY, &action->thread_flags);
- return;
- }
-
- spin_lock_irq(&desc->lock);
- cpumask_copy(mask, desc->affinity);
- spin_unlock_irq(&desc->lock);
-
- set_cpus_allowed_ptr(current, mask);
- free_cpumask_var(mask);
-}
-
-/*
* Interrupt handler thread
*/
static int irq_thread(void *data)
next reply other threads:[~2009-07-22 20:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-22 20:22 Bruno Prémont [this message]
2009-07-22 21:07 ` Thomas Gleixner
2009-07-22 21:21 ` [tip:irq/urgent] genirq: Fix UP compile failure caused by irq_thread_check_affinity tip-bot for Bruno Premont
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090722222232.2eb3e1c4@neptune.home \
--to=bonbons@linux-vserver.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®